KRAFT M.A.N(GERMANY) Engineer’s Tool Kit-
AET- 188 Piece Supplied in a two PROFESSIONAL
suitcases and a three drawer top chest.
Manufactured from heavy gauge steel with double
wall construction side panels and welded joints for
added rigidity. Coated in a hard wearing epoxy
powder. Fully opening drawers for extra accessibility.
Quick release smooth running ball bearing drawer
slides with double sliders on base drawer. Supplied
with top mat and drawer liners. Fully locking. 125 x
50mm heavy duty extra strong castors, fitted with
two brakes. Overall dimensions: 890 x 690 x 460mm.
Castors are rated to 100kg capacity standing load
per castor. Drawer loads should be evenly distributed.
3 Drawer Top Chest Top compartment size: 89 x 661
x 150mm. Drawer sizes: 1@ 51 x 591 x 282.5mm.
2@ 102 x 591 x 282.5mm. 3 Drawer Roller Cabinet
Internal drawer dimensions Bottom compartment
size: 610 x 432 x 356mm. Drawer sizes: 3@ 591 x
410 x 102mm. Contents: • 25 piece HSS drill set 1 -
13.00mm x 0.5mm. • Six piece 200mm double cut
engineer’s file set. • Six piece 16cm cut 2 assorted
needle file set. • 25 x 230 x 280mm assorted
abrasive sheet. • 200mm chrome vanadium steel
adjustable spanner. • 6 x 150mm flat cold chisel. •
19mm x 33m black pvc insulation tape. • 76mm, 18
blade combination feeler gauge set. • 4.8mm square
head centre punch. • 150mm/6” stainless steel rule
c/w pocket clip. • 178mm double ended engineer’s
scriber. • Eye loupe. • Adjustable telescopic 30mm
dia. inspection mirror (expands to 180mm). • Six
piece parallel pin punch set: 2.4, 3.2, 4.0, 4.8, 5.5 and
6.4mm. • 150mm/6” engineer’s square - BS 939
grade B. • Tap wrenches 1.5 - 6.4mm and 6.4 -
19mm. • Magnetic telescopic pick-up tool extends to
550mm. • 29 piece engineer’s bit set. All 6mm hex x
25mm overall length, complete with magnetic spinner
handle, 6mm hexagon bit adaptor and 6mm square
socket adaptor. Hexagon: 2, 3, 4, 5, 6, 7 and 8mm;
flat 3, 4, 5, 5.5, 6.5 and 8mm; 3/32”, 1/8”, 5/32”,
3/16”, 1/4”, 7/32” and 5/16”; crosspoint No.1, 2 and
3; Pozidriv® No.1, 2 and 3. • 450g (1lb) ball pein
hammer wood shaft. • 7.5m/25ft steel tape. • Snap-
off eight segment blade economy knife. • Retractable
trimming knife with five blades. • Junior hacksaw
frame. • 300mm lightweight professional hacksaw
frame. • Six off 12” x 1/2” x 18tpi HSS hacksaw
blades. • 20 junior hacksaw blades. • Two plastic
handle household scissors. • 150mm snipe nose plier
with side cutter. • 150mm diagonal cutting nipper. •
150mm engineer’s combination pliers with side
cutter. • 250mm curved jaw high strength grip
wrench. • Eight piece Pro-Torq screwdriver set:
crosspoint No.1 x 75, No.2 x 100; pozidriv® No.2 x
100; flared 6.3 stubby, 6.3 x 100, 8.0 x 200; parallel
5.0 x 75, 5.0 x 150. • 14 piece combination spanner
set: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and
19mm. • 25 piece metric socket set 1/2” square drive
sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22,
24, 27, 30 and 32mm. Spark plug sockets: M10 and
M14. Accessories: quick release ratchet handle,
sliding T-handle, universal joint, 75, 125 and 250mm
extension bars. • Nine piece metric hex key set 1.5 -
10mm.

contacts me for prize

fishbone11:
contacts me for prize

How much and location plz

davdandam:
How much and location plz

It has been sold already

fishbone11:

It has been sold already

Okkkk.. Do you have any idea about where I can get a tool box like that. .. . Possibly imperial and how much it could cost?

davdandam:

Okkkk.. Do you have any idea about where I can get a tool box like that. .. . Possibly imperial and how much it could cost?

If u stay in Lagos, u can check General warehouse @ Odolowo bus stop, Ijesa, along Oshodi/Apapa road. Its a very big warehouse where containers cleared from the port are been offloaded. There u will see a lot of things imported from all over de world.

fishbone11:

If u stay in Lagos, u can check General warehouse @ Odolowo bus stop, Ijesa, along Oshodi/Apapa road. Its a very big warehouse where containers cleared from the port are been offloaded. There u will see a lot of things imported from all over de world.

Tnks boss

davdandam:
Tnks boss

u welcome...

do you have 19mm 12point socket