If you would like to install an automatic or remote gate operator, you would find the following information very helpful.

Rollers
Automatic gate operators (For sliding gates) works with gates that moves on rollers. If your gate does not have good rollers, your automatic gate operator will not last. Because bad rollers over time gets stiff and makes the gate harder to move. When your gate becomes harder to move, its adds to the workload the automatic gate operator has to carry and will cause your automatic gate operator to suddenly fail.
When buying or fabricating your gate liaise with the welder or fabricator and make sure he uses good rollers. Get one yourself to be on the safe side

This aspect is very important and can never overemphasized If you want to install an auto gate operator your gate must have a very good rollers. Good rollers will ensure your auto gate motor to keeps running for many many years.

Call

Call 07036037821

Call 07036037821 for details

Roller Track Position

Some welders position the gate roller track or angle iron on which the rollers runs almost completely buried in the earth. This practice can cause even the best gate rollers to eventually fail because sand and other debris will hinder the roller from operating smoothly.

The roller should be on a raised track through out the length of the track. The track must also be straight and must plum!

Consider Alternative Power Supply(Solar)

Automatic gate operators are power by electricity and most of them have a battery backup that can store power and allow you to still use your automatic gate operator in case of occasional power outage. But in Nigeria power outage and blackouts are norm and may last for days. In such s circumstances consider using a solar power system to power your gate motor in addition to electric power from the mains.It may cost a little bit more but its worthwhile to keep your automatic gate operator always working.

ONE Size Does Not Fit All

Automatic Gate motors come in different power ranges. Some can move gates weighing 500kg - 800kg others up to 1500kg others up to 3500kg and of course the price of each differs. The biggest problem most people have is that they think all gate motors are the same. Your gate weighs 1200kg and your neighbors gate weighs only 600kg he tells you he installed his Automatic Gate Operator for X amount and you bargain for the same or even less amount. When a machine that carries 800kg maximum is installed on your gate and in a few months times it develops a fault due to overwork you say you have been scammed. You scammed yourself!
Don't sacrifice quality on the altar of price. Always insist on the best machine for your gate's weight.

Traffic

If the gate motor is to be mounted in a high traffic establishment, you should consider getting a heavy duty cycle machine regardless if your gate is lightweight.

Whatsapp 07036037821 for details

a gate operator installed at rock bottom price.

Open and close your gate with the touch of a button

Works up to 72hrs after power failure

Solar power option (can work independent on power from phcn)

2 or more remote control on request.

Low maintenance

High push force.( No matter how heavy your gate we have a machine for you.)

Nationwide installation.

Call 07036037821 for more details

Hello.

Nice one boss.
I will like to know more.
08038557940