Chess Subsea Engineering Limited, a UK based surface, marine & naval architecture, hydrodynamics & subsea production systems engineering consultancy and research & development company in partnership with Institute of Drilling & Petroleum Engineering (IDPE) a training institute governed by the National Executive Council (NEC) and approved by the Federal Ministry of Education Nigeria & Point Engineering an Engineering Design & Project Management company based in Nigeria with years of design experience on onshore & offshore structures & pipelines; jointly are set to train & certify Nigerian graduates and working professionals changing careers; on Onshore & Offshore Topsides and Subsea & Hydrodynamics Engineering Design & Analysis with focus on deep and shallow water project using modern naval architecture, simulation & analysis CAD engineering softwares in accordance to Nigerian Local Content requirements on training and manpower development indigenously.

These sets of training & software workshop will take place in five (5) major cities in Nigeria; namely Lagos, Portharcourt, Warri, Benin & Abuja all through 2018.
Please kindly visit https://chesssubseaengineering.com/trainingnigerians/ to download full first quarter Q4 2018 (January – April) training dates on PDF.
FIRST QUARTER Q4 2018 TRAINING WORKSHOP DATES: PORTHARCOURT | LAGOS

8th – 11th January 2018: Portharcourt
ENG 001: Subsea & Hydrodynamic Engineering (Moorings, Riser, Subsea Installation, Calm Bouy, Stinger) Simulation Analysis with ORCAFLEX
Course Module 1: Fundamentals of Subsea Engineering Design & Analysis – Level 1
Course Module 2: Floating Systems, Riser & Hydrodynamics Engineering – Level 1
Hands On Case Study: FPSO Drift & Excursion Calculations
Workshop: ORCAFLEX (Mooring, Risers & Subsea Installation)
Click here to Download Course Outlines & Objectives

13th January 2018: Portharcourt
ENG 002: Subsea Controls Architecture, Hydraulic Systems & Field Sizing
Course Module 1: Fundamentals of Subsea Engineering Design & Analysis – Level 1
Course Module 2: Subsea Control & Systems Hydraulic Sizing Engineering – Level 1 & Level 2
Hands on Case Study: Extended Brown Field Tie Back Development Hydraulic Systems Sizing
Click here to Download Course Outlines & Objectives

16th – 18th January 2018: Portharcourt
ENG 003: Onshore, Offshore & Subsea Systems 2D Drafting & Annotation with AUTOCAD – Level 1 & Level 2
Course Module 1: Fundamentals of Subsea Engineering Design & Analysis
Course Module 2: Fundamentals of Graphic Communications – 2D
Course Module 3: Fundamentals of 2D Drafting Overview with AutoCAD
Workshop: AutoCAD 2D Drafting & Annotation
Click here to Download Course Outlines & Objectives

20th January 2018: Portharcourt
ENG 002: Subsea Controls Architecture, Hydraulic Systems & Field Sizing
Course Module 1: Fundamentals of Subsea Engineering Design & Analysis – Level 1
Course Module 2: Subsea Control & Systems Hydraulic Sizing Engineering – Level 1 & Level 2
Hands on Case Study: Extended Brown Field Tie Back Development Hydraulic Systems Sizing
Click here to Download Course Outlines & Objectives

22th – 26th January 2018: Portharcourt
ENG 004: Onshore & Subsea Pipeline Stress & Fatigue Analysis with CEASAR II (Buried & Unburied) – Level 1
Course Module 1: Fundamentals of Subsea Engineering Design & Analysis – Level 1
Course Module 2: Fundamentals of Piping & Pipeline Engineering Detailed & FEED Design
Workshop: Offshore Pipeline Stress Analysis with CEASAR II
Click here to Download Course Outlines & Objectives

29th January – 2nd February 2018: Lagos
ENG 001: Subsea & Hydrodynamic Engineering (Moorings, Riser, Subsea Installation, Calm Bouy, Stinger) Simulation Analysis with ORCAFLEX
Course Module 1: Fundamentals of Subsea Engineering Design & Analysis
Course Module 2: Floating Systems, Riser & Hydrodynamics Engineering – Level 1
Hands On Case Study: FPSO Drift & Excursion Calculations
Workshop: ORCAFLEX (Mooring, Risers & Subsea Installation)
Click here to Download Course Outlines & Objectives

3rd February 2018: Lagos
ENG 002: Subsea Controls Architecture, Hydraulic Systems & Field Sizing
Course Module 1: Fundamentals of Subsea Engineering Design & Analysis – Level 1
Course Module 2: Subsea Control & Systems Hydraulic Sizing Engineering – Level 1 & Level 2
Hands on Case Study: Extended Brown Field Tie Back Development Hydraulic Systems Sizing
Click here to Download Course Outlines & Objectives

5th – 9th February 2018: Lagos
ENG 004: Onshore & Subsea Pipeline Stress & Fatigue Analysis with CEASAR II (Buried & Unburied) – Level 1
Course Module 1: Fundamentals of Subsea Engineering Design & Analysis – Level 1
Course Module 2: Fundamentals of Piping & Pipeline Engineering Detailed & FEED Design
Workshop: Offshore Pipeline Stress Analysis with CEASAR II
Click here to Download Course Outlines & Objectives

20th – 23rd February 2018: Portharcourt
ENG 005: Onshore, Offshore & Subsea Systems 2D Drafting & 3D Modeling with AUTODESK INVENTOR – Level 1 & Level 2
Course Module 1: Fundamentals of Subsea Engineering Design & Analysis
Course Module 2: Fundamentals of Graphic Communications – 2D
Course Module 3: 3D Modeling Overview with Inventor
Workshop: AutoDesk Inventor 2D & 3D Components Design & Assembly
Click here to Download Course Outlines & Objectives

TECHNICAL TRAINING LOCATIONS
PORTHARCOURT
Plot 129 Bodo Road, Off Woji Road GRA Phase 2, Portharcourt , Rivers State

LAGOS
14A Bayo Dejonwo Street Maryland Estate,Lagos,Nigeria
TRAINING FEES + WORKSHOP ONLY:
N 150,000 (One Hundred & Fifty Thousand Naira Only)

For other course details, 2018 training schedule & fees; please visit: https://chesssubseaengineering.com/trainingnigerians/
Kindly note that all payment must be made in full a week before course date for effective planning and overall management

TRAINING CERTIFICATION

Jointly issued by IDPE, a training institute governed by the National Executive Council (NEC) and approved by the Federal Ministry of Education Nigeria, Point Engineering & Chess Subsea Engineering Locally.

To be certified by OPITO and City & Guilds internationally; please note that certification fees and online assessment apply.

Core assessment areas & certifications to be awarded by OPITO and City & Guilds are as follows:
• Subsea Technology
• Subsea Equipment and Tools
• Material Technologies, Subsea Systems and Flow Assurance
• Subsea Controls
• ROV Systems

Kindly contact us directly on info@chesssubseaengineering.com.

COURSE TRAINING FEES

N 150,000 Naira Only (Beginners Level)
For intermediate & advance level; please click here or contact info@chesssubseaengineering.com directly.

HOW TO REGISTER:
Click here, fill the attached MSword form and submit to info@idpe.org
For all inquiries please call +234 8177445392,+ 234 9053630130, +2348151453146 or send email to: info@idpe.org, trainings@chesssubseaengineering.com, info@chesssubseaengineering.com or info@pointengineering.com
BANK ACCOUNT DETAILS
All payment with regards to trainings should be made to the following account below:
Institute of Drilling & Petroleum Engineering, NIGERIA
Diamond Bank
ACCOUNT NO: 0048400256 (CURRENT)

For general consultancy, career change, individual / corporate training or Engineering Research & Development guidance at BEngr, Msc or PHD level (Pipeline, Offshore, Subsea & Hydrodynamics, and Naval Architecture); please contact us directly on:
Email: info@chesssubseaengineering.com
Tel: +2348151453146 (For Nigerians Only).