BuildDirect Africa is Africa's first and biggest manufacturer of Laser Cut and CNC routed building additions for both residential and commercial building projects.

At BuildDirect Africa, we design, laser cut and route metals and non-metal for building exterior and interior additions.

BuildDirect Africa operates a fully automated Laser Cutting and CNC Routing factory in Lagos State, Nigeria, equipped with the latest high powered Laser Cutting and Cnc machinery and more.

You can always contact us via: 0811-888-8897

website: www.builddirectafrica.com

We offer a wide range of services including

Laser Cutting

Using multi fiber laser cutting systems plus state of the art laser scanning and inspection equipment makes us the one stop shop for all your 2D and 3D laser cutting requirements..


CNC Routing

The core of our business is CNC machining. Whether it was a table top that needed powder coating or a piece for an acrylic bin that needed assembly, it all started with our CNC machines.

Design & Build Services
Our experienced engineers are available to help and assist you at the planning or design stage of your project, as well as guiding you through the different services we offer

Laser Cut Ceilings

At BuildDirect Africa, we produce Laser Cut Ceilings for interiors

Wawu.

More of our Laser Cut products

Call 0811-888-8897 to book an appointment and a tour of our factory

Working on an outdoor project? When it comes to the outdoors, each material can have a very different role to play and can react differently when exposed to the elements.

Whether you're looking for something sturdy, or something which will never corrode, here's our advice for using metals outdoors:

- Mild steel is the most common and least expensive metal but it corrodes quickly if exposed to moisture. To prevent corrosion steel is normally galvanised after cutting and then a decorative powder coat applied – this can be specified for outdoor use.

- Aluminium forms a protective Oxide coating when exposed to air which limits corrosion. However, repeated wet / dry cycles can stain the aluminium surface and this is difficult to remove. It's best to protect the surface with either powder coating, or anodising (where the aluminium’s natural sheen can be seen).

- Stainless steel is corrosion resistant, not corrosion proof. If using in an outdoor situation, particularly where fumes from traffic are present, you may consider specifying 316 grade Stainless as this is much more resistant to corrosion.

- Brass and copper are good but expensive outdoor materials. They don’t tend to corrode but eventually will suffer from patination of the surface - a clear lacquer can be applied which could protect the surface for a long time.

for More information on architectural projects you can achieve via laser cutting call 0811-888-8897

More samples from BuildDirect Africa

When it comes to panels, think lasers

Laser cutting gives architects and designers’ creative ideas a whole new dimension – allowing them to create stunning decorative panels for balconies and balustrading and Facades. It’s our philosophy that, if you can draw it, the lasers can cut it.

Creating panels for balconies and balustrading is an area where a whole host of materials can be used, from stainless steel to Corten and bronze to aluminium.

As well as being aesthetically pleasing, the panels have to be practical and adhere to building regulations.

By processing CAD drawings through our latest CAM package, stairs and tread specs can be very accurately produced.

Laser cutting can be used for stair treads too. Anti-slip durbar tread plates can be cut all the way up to 20mm thickness to suit any profile required. Laser cutting is also a popular process to make open decorative patterns in stair treads and is far more cost effective than traditional cast iron techniques for bespoke creations.

It’s not just about cutting – you can use our engraving service to etch alpha numerical identifications on each panel. This allows for an easy reference to where each panel should be fitted on site – enabling faster construction on larger projects.



Laser cutting produces a high-quality edge far superior to the old traditional flame and plasma cut methods. That’s why we’ve invested more than £0.7m to keep on top of the latest laser technology and can now offer advanced cutting feed rates - enabling us to reduce lead times to as short as two to three days.

Speak to our team of experts today on why laser cutting panels for balustrades is the best option. 0811-888-8897

Quality delivery is our watchword

do you cut for small diy projects?

kanayoNickel:
Quality delivery is our watchword

What if I want to cut a small piece of sheet of about 0.1 - 0.2 thickness and final shape size of less than 300mm X 240mm from outside Lagos? What do I do to get that done with you guys?