captainking:
hello all, car talk has been my home on nairaland...if seun decides to remove car talk from nairaland, i will jejely remove myself too. The issue..i drive a honda accord 2005..v4..on a good day, i decided to use my mini car scanner to scan my car and it came up with the following codes....p0141( 02 sensor heater circuit, bank 1 sensor 2) p1157..it did not give any description...P0010("A" camshaft position actuator circuit bank 1)...All this codes were in red,,,meaning,,,current fault,,it also gave another code in green,,meaning,,,pending fault...p0507(idle control system RPM higher than expected....

Please guys, how do i go about this..i need to get these codes cleared..i have cleared the codes with my scanner and it came back the same....
NB..the car drives fine..vibrates silently in park, reverse and neutral, but in drive...its vibrations becomes a little more pronounced..but not violent,...just a little vibration..

i call upon all the car gurus super squad to come to my aid.. Gazzuzz, mayor123, obekediamondfuto, kingreignn, honmusa, timifakay, chukel, motorguru, thebigkendo, autojosh, trygo, diportivo, egunmogaji, lexusgs430, eriko2k2, autojoshng..
you guys are the avengers and justice league of all car wahala

captainking:
hello all, car talk has been my home on nairaland...if seun decides to remove car talk from nairaland, i will jejely remove myself too. The issue..i drive a honda accord 2005..v4..on a good day, i decided to use my mini car scanner to scan my car and it came up with the following codes....p0141( 02 sensor heater circuit, bank 1 sensor 2) p1157..it did not give any description...P0010("A" camshaft position actuator circuit bank 1)...All this codes were in red,,,meaning,,,current fault,,it also gave another code in green,,meaning,,,pending fault...p0507(idle control system RPM higher than expected....

Please guys, how do i go about this..i need to get these codes cleared..i have cleared the codes with my scanner and it came back the same....
NB..the car drives fine..vibrates silently in park, reverse and neutral, but in drive...its vibrations becomes a little more pronounced..but not violent,...just a little vibration..

i call upon all the car gurus super squad to come to my aid.. Gazzuzz, mayor123, obekediamondfuto, kingreignn, honmusa, timifakay, chukel, motorguru, thebigkendo, autojosh, trygo, diportivo, egunmogaji, lexusgs430, eriko2k2, autojoshng..
you guys are the avengers and justice league of all car wahala

diportivo:



you have not washed the car for us therefore I'm not commenting on the issues u have

last time I checked,na baby boy u dey drive

last last time I checked,na Avalon u wan buy

GAZZUZZ:


you are clearly not Hands on.

take vehicle to a tech that can understand the codes.

captainking:
hello all, car talk has been my home on nairaland...if seun decides to remove car talk from nairaland, i will jejely remove myself too. The issue..i drive a honda accord 2005..v4..on a good day, i decided to use my mini car scanner to scan my car and it came up with the following codes....p0141( 02 sensor heater circuit, bank 1 sensor 2) p1157..it did not give any description...P0010("A" camshaft position actuator circuit bank 1)...All this codes were in red,,,meaning,,,current fault,,it also gave another code in green,,meaning,,,pending fault...p0507(idle control system RPM higher than expected....

Please guys, how do i go about this..i need to get these codes cleared..i have cleared the codes with my scanner and it came back the same....
NB..the car drives fine..vibrates silently in park, reverse and neutral, but in drive...its vibrations becomes a little more pronounced..but not violent,...just a little vibration..

i call upon all the car gurus super squad to come to my aid.. Gazzuzz, mayor123, obekediamondfuto, kingreign, honmusa, timifakay, chukel, motorguru, the.bigkendo AutoElectNG, autojosh, trygo, diportivo, egunmogaji, lexusgs430, eriko2k2, autojoshng..
you guys are the avengers and justice league of all car wahala

thebigkendo:


Before we go further,Please answer this:
1. Do you have access to a Multimeter?
2. Do know how to use a Multimeter?
If any of your answer is "NO", jejely find a competent Kazeem rewire Technician who knows how to use a scanner

Any recent work on the car?

thebigkendo:


Before we go further,Please answer this:
1. Do you have access to a Multimeter?
2. Do know how to use a Multimeter?
If any of your answer is "NO", jejely find a competent Kazeem rewire Technician who knows how to use a scanner

Any recent work on the car?

diportivo:



you have not washed the car for us therefore I'm not commenting on the issues u have

last time I checked,na baby boy u dey drive

last last time I checked,na Avalon u wan buy

captainking:

Hahahahahhssh.. FBI investigator..the Avalon was supposed to be a second car boss.. Besides the eod.. Heheheh.. The baby boy has a new owner in Lagos. My younger bro... I am in ph now boss.. How I fit take send the origin and fish??

Specialist900:
na so you take leave me for babyboy?

Wash am reach my side o. I tot you said you'll be going for a v6 instead of i4

EgunMogaji:
Join a Honda forum and read up.

In the meantime look for frayed wires and unplugged clips in harnesses.

EgunMogaji:
Join a Honda forum and read up.

In the meantime look for frayed wires and unplugged clips in harnesses.

diportivo:



you have not washed the car for us therefore I'm not commenting on the issues u have

last time I checked,na baby boy u dey drive

last last time I checked,na Avalon u wan buy

timifakay:


Monitoring spirit.
Representative of village people.

captainking:
hello all, car talk has been my home on nairaland...if seun decides to remove car talk from nairaland, i will jejely remove myself too. The issue..i drive a honda accord 2005..v4..on a good day, i decided to use my mini car scanner to scan my car and it came up with the following codes....p0141( 02 sensor heater circuit, bank 1 sensor 2) p1157..it did not give any description...P0010("A" camshaft position actuator circuit bank 1)...All this codes were in red,,,meaning,,,current fault,,it also gave another code in green,,meaning,,,pending fault...p0507(idle control system RPM higher than expected....

Please guys, how do i go about this..i need to get these codes cleared..i have cleared the codes with my scanner and it came back the same....
NB..the car drives fine..vibrates silently in park, reverse and neutral, but in drive...its vibrations becomes a little more pronounced..but not violent,...just a little vibration..

i call upon all the car gurus super squad to come to my aid.. Gazzuzz, mayor123, obekediamondfuto, kingreignn, honmusa, timifakay, chukel, motorguru, thebigkendo, autojosh, trygo, diportivo, egunmogaji, lexusgs430, eriko2k2, autojoshng..
you guys are the avengers and justice league of all car wahala

captainking:
hello all, car talk has been my home on nairaland...if seun decides to remove car talk from nairaland, i will jejely remove myself too. The issue..i drive a honda accord 2005..v4..on a good day, i decided to use my mini car scanner to scan my car and it came up with the following codes....p0141( 02 sensor heater circuit, bank 1 sensor 2) p1157..it did not give any description...P0010("A" camshaft position actuator circuit bank 1)...All this codes were in red,,,meaning,,,current fault,,it also gave another code in green,,meaning,,,pending fault...p0507(idle control system RPM higher than expected....

Please guys, how do i go about this..i need to get these codes cleared..i have cleared the codes with my scanner and it came back the same....
NB..the car drives fine..vibrates silently in park, reverse and neutral, but in drive...its vibrations becomes a little more pronounced..but not violent,...just a little vibration..

i call upon all the car gurus super squad to come to my aid.. Gazzuzz, mayor123, obekediamondfuto, kingreignn, honmusa, timifakay, chukel, motorguru, thebigkendo, autojosh, trygo, diportivo, egunmogaji, lexusgs430, eriko2k2, autojoshng..
you guys are the avengers and justice league of all car wahala

GAZZUZZ:



.Confirm if all the wiring connected to O2 sensors are intact, if ok, replace these 2 sensors p0141 p1157



Check wires connected to both cam sensors, 1 is loose(never seen a honda accord cam shaft die) P0010

Some one fiddled with the butterfly reset it back. p0507

sultaan:


I think bank 1 is driver side so check the second o2 sensors like the one under the car see if the wire is damaged ,repair and insulated with proper electric tape then check and replace e the burnt o2 heater fuse.

Clean your throttle body and idle air control valve than might herewith idle.

I don't know what your cam sensor looks like now but find an engine diagram inspect wiring first then connection just I case oil leak got into it

captainking:
Any more contributions gurus.. I need more guys.. I need to be properly armed.. I now understand that my o2 sensors need to be checked.. My major concern is the camshaft sensor code...thats what I really need to understand

captainking:
Any more contributions gurus.. I need more guys.. I need to be properly armed.. I now understand that my o2 sensors need to be checked.. My major concern is the camshaft sensor code...thats what I really need to understand

sultaan:



Remember that it is a circuit fault so you new to Chen the integrity of sitting and connection.
Sometimes all you have to do is disconnect and reconnect because the last person did connect the plug properly.

I am not sure how many camshaft you should have in your 4 cyl, check to make sure you have the right ecu number ad no vacuum leak from cracked hoses

MotorGuru:
Kindly check the integrity of all connections, then your wiring to these sensors.It is more of a circuit problem.
VTC solenoids on the K24 engines fitted to this car rarely goes bad. This would be in the least of my suspicions.

GAZZUZZ:


Least of your worries. Iv never seen 1 get bad on that engine, just check the 2 sockets.