Basic Tools Your Need1 A PC mean personal computer- laptop or desktop
2 A Phone that as
GPRS and
Bluetooth eg the best
Nokia and
Sonyerricsson model
3
Any of these to make your connection with PC select your choice for me i select Bluetooth A Blue tooth dongle make sure it comes with installation CD
B DUK5 cable not dku 2 that as installation CD Tip dku2 cable will not work
you must know how to create network before you can use this free solution
just go to my networkplace and create a new network
4 download
http://www.opera.com or
www.mozila.pl/ 5 get glo simcard i prefer
6 call customer care 112 that you want to active for GPRS
if you like downloading make sure you sownload
www.dap.com or
www.download.com/Download-Accelerator-Plus/3000-2071_4-10037157.html - 71k -
Tip please i prefer you don't use the glo you make for your personal calls reason that if you are browsing if people try to call you will not recieve well.if you need any support text me not call anymore i alway busy (koollife on +2348035385753 +23478120085 +23427511545 +2348023657689)
email-koolzykoller@yahoo.commore codes and solution visit
www.koollifepower.com or
www.koollife.net.msNever doubt this Free solution.
The End to Starcom multinlinks Oduatel and others
Tip you can get bluetooth at and computer or Digital shops
you can make research with google to know what iam talking about is real
NB
for those who does not know how to make network connection fellow the instruction
guys its pretty simple and of course free, :peace:
The main idea is simple, the pc's internet connection is shared thru bluetooth to your fone!!
This will work on most s60 phone I guess! iI personally tested it on N-GAGE and N-GAGE QD works 100000%
:arrow: Step 1:
Creating an access point on your phone!
menu\tools\settings\connection\access points\options\new access point>default settings,
these are the settings u need there,
Connection Name : Anything (sugestion ADLS or Bluetooth something u remember well cuz u'll need it later!)
Data Bearer: GPRS
Access Point Name: The name you gave to your bt connection when pairing up with the computer,
Username : None
Password : No
Authentication : Normal
Gateway IP Address : 0.0.0.0
DONE HERE
:arrow: Step 2
then go to:
menu/tools/settings/connection, and select GPRS
set the GPRS connection to "when available", and the access point to "none".
The settings on your fone are done! now, the next step;
Create a serial port connection from your pc to your phone and this serial connection must be on everytime you want to use your pc internet connection same as a gprs connection for your phone!!
no need to do this, if u have your pc suite installed,
If it is, then just keep everything ready and open your PC suite u will see the router icon connecting, once it gets connected (logo changes)
tht means u r ready to use the net, u cn close the pc suite window but make sure the mRouter is still running and connected
IF U HAVE ADSL it wud be gr8!!!!!!!!! HIGH SPEED INTERNET!!!!!!!!
Install the software u need to surf the web
Opera (N-Gage QD) (
http://www.imserba.com/forum/attachment.php?attachmentid=76843)
Opera (others)
Agile for chatting. MSN YAHOO GTALK AOL,
GET THEM FROM TED APP INDEX OR INFINS INDEX
in the software settings set the bluetooth connection as your default one
My advise to you is to use opera, the options are pretty cool and it uses less memory meaning u can still run other program such as agile at the same time
Voilá your ready to use your phone to surf and chat for free!!
hope this helped you and that is simple and clear!! any question u know how to post here, this will be updated if many doubts come up.
ps. works with ngage arena games not copied from pc, but only game cards.
FOR NOKIA 6600 its quite different so here goes,
1. Deactivate all the Checkboxes in mRouter (at least the ones of the Bluetooth COM ports)
2. Goto Bluetooth settings and Deactivate everything else in Local services than Bluetooth serial port, note the com port you set as bluetooth serial port
3. Goto Phone and Modem options, go to "Modems" add a new one, activate "I will select it from a list"
4. choose "Communications cable between 2 Computers" from the list (in Standard Modem Types)
5. Select the COM port from step3
6. in the modem settings set maximum port speed to 115200
7. goto Network Connections and create a new connection (wizard)
8. Select “Set up an advanced connection” -> Next
9. “Accept incoming connections” -> Next
10. Check the “Communications cable between two computers” -> Next
11. Do not allow VPN connections ->
12. select a username you want to give access to your pc over Bluetooth (that’s the username you will set on the phone later)
13. in the settings of that connection go to Network select TCP/IP -> Settings
14. set the IP range to something like 10.0.2.2-10.0.2.254 or, what you like
15. Remove Internet Connection Sharing from all interfaces
16. run cmd.exe and enter the following commands:
Code:
netsh routing ip nat install netsh routing ip nat add interface "YOUR LAN INTERFACE NAME" full netsh routing ip nat add interface Internal private
“YOUR LAN INTERFACE NAME” has to be replaced with the name of the interface connected to the internet
the “Internal” of the last line depends on the language of your windows (e.g. german: “Intern”
17. if there is a "Bluetooth Network" connection in Network Connections delete it
your pc should now be set correctly
go on with your 6600:
1. Download gnubox6600.sis,
Mirror 1 (
http://www.streamupload.com/download.aspx?fileID=2006629645)
Mirror 2 (
http://storeandserve.com/download/265263/gnubox6600.rar.html)
Mirror 3 (
http://rapidshare.de/files/22018559/gnubox6600.rar.html)
and install it on your phone
2. Create a new Access Point on the phone (Setting|Connection|Access points|New access point|Use default settings).
3. Use the following settings for it:
a. Name: Bt. The name is important, the software will look for it.
b. Data Bearer: GSM data
c. Dial-up number: e.g. 2222. It doesn't matter what you have here as long as it's not empty
d. Username: the username you gave access to the incoming connection earlier
e. Promp password: No
f. Password: password for the user on Windows
g. Authentication: Normal
h. Advanced Settings: Use Login Script Yes
i. Advanced Settings: Login Script
Code:
CHARMAP [windows-1252] LOOP 10 { SEND "CLIENT"+<0x0d> WAIT 3 { "SERVER" OK } } EXIT KErrNoAnswer$ OK: EXIT
be careful that you get it exactly as show here, including linebreaks. You could save it to a file, send to the phone and copy-paste to the settings.
j. Advanced Settings: Use PPP Compression Yes
4. run the program you installed at step1 (gnubox)
5. inside gnubox: Options-> 2box Direct -> Bluetooth, select your computer, leave gnubox running in background
6. run the nokia wml browser select "Bt" as access point and connect
thats all i did, sounds much now but i think it was worth the time i needed
i hope i could help you guys set this thing up
btw i just streamed a live tv to my 6600 over bluetooth with real helix!!!
some parts of this how-to were ripped from
http://www.cs.helsinki.fi/u/mraento/symbian/bt-ap.html
![Nairaland [Nigerian Forum] Home](http://www.nairaland.com/Themes/default/images/english/home.gif)
Author
