Pc Maintenance And Repairs- Tips On How To Get Started

In this tutorial i am going to teach on how to maintain and repair your computer system,

but i am going to start with introduction to the various parts of the computer hardware.

In a computer system we have the main hardware parts they are

1 CD/DVD DRIVE

2. HARD DISK

3. FLOPPY DISK

4. CPU

5. VGA CARD

6. RAM

7. POWER PARK

8. MOTHER BOARD

All these are what are seen inside a typical computer system unit.
The cd/dvd drive is where you put and play your cd/dvd. The hard disk is the main memory of your computer, the floppy disk is where you put floppy disk, the CPU is the processor of the computer. The VGA card known as Video graphic adapter is your video card where you connect your monitor. Most computers come with in-built VGA adapter. The Ram which is short form for random access memory is the memory that stores the operating system and its programs when you boot your computer it is called random access memory because it is volatile, i.e any information stored in it will be lost when there is power failure.The power pack is the power panel of the computer and the mother board is the main board of the computer system where all these computer parts are connected. I have a video tutorial that will show you all the various computer parts shown above and how they are connected. The video is a good guide on identifying various parts of the computer and how the are connected

The link to the video is below. In the next tutorial i am going to look at how to increase the ram and add extra hard disk

Watch this free Video tutorial at http://www.44eu.com/dating/viewVideo.php?fileID=12

 Please if you like this tutorial comment