Telecommunication Faults & Solutions For Engineers / Technicains

My follow Telecommunication Engineers / Technicians,

You are welcome to this FORUM and your inputs are highly needed

on  Faults & Solutions in Telecommunication Equipments,

Please note that any Fault must have a Solution for it.


Thanks in Anticipation.

This is for Ericsson min link Equipment

Alarm B A @ minlink radio modem unit (mmu),

what is the meaning that alarm?

what is the solution for the fault?

All Transmission Engineers,  ur inputs are urgently needed.

@ buddie

Thanks for your input but kindly post the solution to forum so that others can learn


SOLUTION TO MMU PROBLEM
Give loop with E1 cable & call your MSC to confirm loop but if alarm is still on, then replace the modem

The ERICSSON commands listed below are for these functions


RLCRP:CELL=ALL;  ----------- for viewing all the cells of BSC sites  ( BSC )

DTSTP:DIP=ALL;  ------------- for viewing state of digital path and links ( MSC & BSC )

MGSVP:  ------------------------ for checking subscribe base ( MSC )

STRSP:R=ALL; ----------------- for checking all route ( MSC & BSC )


please send your input for young Engieers / Techncians to learn or gain more experience.

Thats for your information


dtbli:dip=rblt**;    --------- ----blocking of  dip

dtble:dip=rblt**;  --------- ------deblocking of dip

rxmsp:mo=rxotg-**,subord;  ------- management object status

rxmfp:mo=rxotg-**,subord; ---------- fault print comand for management object

Dear All

Iam using ericsson oss , i wants to reset all the rbs sites located in BSC