so for the people asking that I should post the procedures on how to root their oukitek u20, Note that you will need a PC for the rooting
here are the procedures....
1.you have to click OEM unlock in the developer settings, its gonna ask of your psw if you have any,
2. download the following files..
a. SP_Flash_Tool_v5.1628_Win.zip
b.TWRP_303_OUKITEL.U20_V3.03.zip
c. SuperSU-v2.79-SR3-20170114223742.zip , place this SuperSU in your internal memory. do nt extract. I repeat do not extract it. just leave it in your internal memory

3. after successful downloads, u send d spflash tool to a system then you extract it to your desktop.
4. after extracting the spflash tool, you also send the twrp to your system and extract it to the spflash tool folder.
5. once you extract these two. open the spflash tool and scroll down to a file called flash tool. the flash tool is an application file.
click on flash tool and once it loads, it will automatically load the twrp file u extracted, you will see recovery and scatter file
6. and note that in d flash tool, make sure only recovery is ticked on the list of files, also at the top of flash tool, download only should be clicked
7. then switch off your phone, make sure you've click unlock OEM in d developer setting.
8.after switching off your phone, plug it to d system and if its show charging, uplug it and plug again. then press OK or DOWNLOAD in the flash tool..it won't take up to 5 to 10secs.. after successful flashing it will pop up download successful, then u click ok..


you have just flashed twrp to you phone.
9. next is to boot your phone into recovery mode by pressing the power button and the volume down button altogether for about 10secs.
10. you should see the twrp homepage in the recovery mode, then you press install and you locate the SuperSU u placed in your infernal memory
11. then you swipe to flash the SuperSU.

you shouldn't be bothered much about the twrp recovery mode, coz once you're able to boot successfully to recovery, the remaining are just to follow the onscreen instruction..

12. after all flashing the SuperSU, it will prompt u to reboot, once reboot is successful, download root checker from play store to confirm root access, and u re good to go..
that's all, then you can start any type of tweaking you want.

you can ask further questions from my oga at the top
@ ibrash600

oga I hail oooh..


note that if your oukitel version is 3.14
contact ibrash600 or me for your txt file..

johnlondon:
so for the people asking that I should post the procedures on how to root their oukitek u20, Note that you will need a PC for the rooting
here are the procedures....
1.you have to click OEM unlock in the developer settings, its gonna ask of your psw if you have any,
2. download the following files..
a. SP_Flash_Tool_v5.1628_Win.zip
b.TWRP_303_OUKITEL.U20_V3.03.zip
c. SuperSU-v2.79-SR3-20170114223742.zip , place this SuperSU in your internal memory. do nt extract. I repeat do not extract it. just leave it in your internal memory

3. after successful downloads, u send d spflash tool to a system then you extract it to your desktop.
4. after extracting the spflash tool, you also send the twrp to your system and extract it to the spflash tool folder.
5. once you extract these two. open the spflash tool and scroll down to a file called flash tool. the flash tool is an application file.
click on flash tool and once it loads, it will automatically load the twrp file u extracted, you will see recovery and scatter file
6. and note that in d flash tool, make sure only recovery is ticked on the list of files, also at the top of flash tool, download only should be clicked
7. then switch off your phone, make sure you've click unlock OEM in d developer setting.
8.after switching off your phone, plug it to d system and if its show charging, uplug it and plug again. then press OK or DOWNLOAD in the flash tool..it won't take up to 5 to 10secs.. after successful flashing it will pop up download successful, then u click ok..


you have just flashed twrp to you phone.
9. next is to boot your phone into recovery mode by pressing the power button and the volume down button altogether for about 10secs.
10. you should see the twrp homepage in the recovery mode, then you press install and you locate the SuperSU u placed in your infernal memory
11. then you swipe to flash the SuperSU.

you shouldn't be bothered much about the twrp recovery mode, coz once you're able to boot successfully to recovery, the remaining are just to follow the onscreen instruction..

12. after all flashing the SuperSU, it will prompt u to reboot, once reboot is successful, download root checker from play store to confirm root access, and u re good to go..
that's all, then you can start any type of tweaking you want.

you can ask further questions from my oga at the top
@ ibrash600

oga I hail oooh..


note that if your oukitel version is 3.14
contact ibrash600 or me for your txt file..

Thanks bro.

How did you tweak the status bar and changed the font??

johnlondon:
so for the people asking that I should post the procedures on how to root their oukitek u20, Note that you will need a PC for the rooting
here are the procedures....
1.you have to click OEM unlock in the developer settings, its gonna ask of your psw if you have any,
2. download the following files..
a. SP_Flash_Tool_v5.1628_Win.zip
b.TWRP_303_OUKITEL.U20_V3.03.zip
c. SuperSU-v2.79-SR3-20170114223742.zip , place this SuperSU in your internal memory. do nt extract. I repeat do not extract it. just leave it in your internal memory

3. after successful downloads, u send d spflash tool to a system then you extract it to your desktop.
4. after extracting the spflash tool, you also send the twrp to your system and extract it to the spflash tool folder.
5. once you extract these two. open the spflash tool and scroll down to a file called flash tool. the flash tool is an application file.
click on flash tool and once it loads, it will automatically load the twrp file u extracted, you will see recovery and scatter file
6. and note that in d flash tool, make sure only recovery is ticked on the list of files, also at the top of flash tool, download only should be clicked
7. then switch off your phone, make sure you've click unlock OEM in d developer setting.
8.after switching off your phone, plug it to d system and if its show charging, uplug it and plug again. then press OK or DOWNLOAD in the flash tool..it won't take up to 5 to 10secs.. after successful flashing it will pop up download successful, then u click ok..


you have just flashed twrp to you phone.
9. next is to boot your phone into recovery mode by pressing the power button and the volume down button altogether for about 10secs.
10. you should see the twrp homepage in the recovery mode, then you press install and you locate the SuperSU u placed in your infernal memory
11. then you swipe to flash the SuperSU.

you shouldn't be bothered much about the twrp recovery mode, coz once you're able to boot successfully to recovery, the remaining are just to follow the onscreen instruction..

12. after all flashing the SuperSU, it will prompt u to reboot, once reboot is successful, download root checker from play store to confirm root access, and u re good to go..
that's all, then you can start any type of tweaking you want.

you can ask further questions from my oga at the top
@ ibrash600

oga I hail oooh..


note that if your oukitel version is 3.14
contact ibrash600 or me for your txt file..

U didn't talk about how u installed the very important xposed framework

bobo65:




U didn't talk about how u installed the very important xposed framework

Exactly

johnlondon:
so for the people asking that I should post the procedures on how to root their oukitek u20, Note that you will need a PC for the rooting
here are the procedures....
1.you have to click OEM unlock in the developer settings, its gonna ask of your psw if you have any,
2. download the following files..
a. SP_Flash_Tool_v5.1628_Win.zip
b.TWRP_303_OUKITEL.U20_V3.03.zip
c. SuperSU-v2.79-SR3-20170114223742.zip , place this SuperSU in your internal memory. do nt extract. I repeat do not extract it. just leave it in your internal memory

3. after successful downloads, u send d spflash tool to a system then you extract it to your desktop.
4. after extracting the spflash tool, you also send the twrp to your system and extract it to the spflash tool folder.
5. once you extract these two. open the spflash tool and scroll down to a file called flash tool. the flash tool is an application file.
click on flash tool and once it loads, it will automatically load the twrp file u extracted, you will see recovery and scatter file
6. and note that in d flash tool, make sure only recovery is ticked on the list of files, also at the top of flash tool, download only should be clicked
7. then switch off your phone, make sure you've click unlock OEM in d developer setting.
8.after switching off your phone, plug it to d system and if its show charging, uplug it and plug again. then press OK or DOWNLOAD in the flash tool..it won't take up to 5 to 10secs.. after successful flashing it will pop up download successful, then u click ok..


you have just flashed twrp to you phone.
9. next is to boot your phone into recovery mode by pressing the power button and the volume down button altogether for about 10secs.
10. you should see the twrp homepage in the recovery mode, then you press install and you locate the SuperSU u placed in your infernal memory
11. then you swipe to flash the SuperSU.

you shouldn't be bothered much about the twrp recovery mode, coz once you're able to boot successfully to recovery, the remaining are just to follow the onscreen instruction..

12. after all flashing the SuperSU, it will prompt u to reboot, once reboot is successful, download root checker from play store to confirm root access, and u re good to go..
that's all, then you can start any type of tweaking you want.

you can ask further questions from my oga at the top
@ ibrash600

oga I hail oooh..


note that if your oukitel version is 3.14
contact ibrash600 or me for your txt file..

Oga @ d top ke??
Thanks man.

bobo65:




U didn't talk about how u installed the very important xposed framework

You have to flash xposed.zip through twrp, den install it's apk

ibrash600:

You have to flash xposed.zip through twrp, den install it's apk

Links

bobo65:




U didn't talk about how u installed the very important xposed framework

you guys only asked me how I rooted it,
and I was thinking one step at a time
once u re fully rooted, we can talk about xposed.

ibrash600:
You have to flash xposed.zip through twrp, den install it's apk

my oga don talk ...

bobo65:


Links

search for this zip file online : xposed-v87-sdk23-arm64.zip that's d one u will flash via twrp
then download this apk:Xposed Installer_3.1.1.apk. this is d installer apk
ask my oga ibrash600 for specific links if u want links. or u could just go by searching what I posted above

adegab4real007:


Thanks bro.

How did you tweak the status bar and changed the font??

uwlc bro....

I used twrp to flash xposed module,
then downloaded d xposed installer, where I activated my flatbar status notification and gravity box mm..

so its d flatbar status notification that I used to tweak it

ibrash600:



Oga @ d top ke?? Thanks man.

LoL.. baba na you ooh

what about custom roms for oukitel u20plus

Pls wat are the price ranges of all these phones in naira. Oukitel, leagoo, doogee. Biko sumone shud help

Prices of all these phones in naira. Sumone e shud help

Two months old Oukitel u20 plus for sale at an affordable price #28000

johnlondon:


uwlc bro....

I used twrp to flash xposed module,
then downloaded d xposed installer, where I activated my flatbar status notification and gravity box mm..

so its d flatbar status notification that I used to tweak it

I've been able to root, flash twrp and install xposed framework and installer on my Shoot 1.

However, I couldn't flash the framework work via twrp, kept getting error, but I used another method sha, thanks to Google.

Lemme go play around with some modules

Lemme see this your over hype oukitel u20plus camera compare to my leagoo m8pro

johnlondon:


uwlc bro....

I used twrp to flash xposed module,
then downloaded d xposed installer, where I activated my flatbar status notification and gravity box mm..

so its d flatbar status notification that I used to tweak it

Bro, abeg I can't find the flabar status notification o

adegab4real007:

Bro, abeg I can't find the flabar status notification o

ahh... its on play store sef . flat style bar indicator...that's d name

johnlondon:



ahh... its on play store sef
.
flat style bar indicator...that's d name

Muchas graçias bro. My status bar now is lit!

PS: You can crack the FSBI with lucky patcher and enjoy unlimited tweaks

Got the doogee y6 max [courtesy mr Noobody] if you wish to know more about the device chat me on WhatsApp 0703130101three or on telegram 0805145302two. I keep getting banned when I post the telegram link.

adegab4real007:


Muchas graçias bro. My status bar now is lit!

PS: You can crack the FSBI with lucky patcher and enjoy unlimited tweaks

wow....make sense
nice one bro!!
I used ifont to tweak my font..


p.s; I need your detailed procedures on how to crack fsbi with lucky patcher....

Ogas in the house, I need your help oh. Anyone in Abuja that can help to tweak my M8 pro...that big 3g is not very cool at all

adegab4real007:


Muchas graçias bro. My status bar now is lit!

PS: You can crack the FSBI with lucky patcher and enjoy unlimited tweaks

Really? Lucky patcher..wow!!!
Let me try it with lucky patcher

johnlondon:


wow....make sense
nice one bro!!
I used ifont to tweak my font..


p.s; I need your detailed procedures on how to crack fsbi with lucky patcher....

Download lucky patcher, install and launch it.

Grant it superuser access if prompted, if not move to the next step.

Look for Fsbi in the app list and tap on it.

Then tap on Open Menu of Patches, and then tap "Support patch for inApp and LVL emulation"

Finally, tap on Apply and wait for the results.

Bingo!

adegab4real007:


Download lucky patcher, install and launch it.

Grant it superuser access if prompted, if not move to the next step.

Look for Fsbi in the app list and tap on it.

Then tap on Open Menu of Patches, and then tap "Support patch for inApp and LVL emulation"

Finally, tap on Apply and wait for the results.

Bingo!

bingo!! indeed bro,
I just cracked it also here,,thanks for d info.
but I needed to activate it in xposed before lucky patcher was able to crack it..

johnlondon:



bingo!! indeed bro,
I just cracked it also here,,thanks for d info.
but I needed to activate it in xposed before lucky patcher was able to crack it..

Nah, u need not activate it in Xposed before cracking it, but if that's how it worked for you. No wahala.

johnlondon:



bingo!! indeed bro,
I just cracked it also here,,thanks for d info.
but I needed to activate it in xposed before lucky patcher was able to crack it..

Oh good lord. I love tweaking

ibrash600:

Oh good lord. I love tweaking

lol....
yeahhh.............

me too...tweaking is bae

adegab4real007:


Nah, u need not activate it in Xposed before cracking it, but if that's how it worked for you. No wahala.

bro..I'm guessing either ur version of fsbi is not 3.1.3,
coz even after activating it in xposed. I had to change some few setting in lucky patcher bfor it finally cracked..

anyways!!
we've reached d goal...
thumbs up bro

johnlondon:



bro..I'm guessing either ur version of fsbi is not 3.1.3,
coz even after activating it in xposed. I had to change some few setting in lucky patcher bfor it finally cracked..

anyways!!
we've reached d goal...
thumbs up bro

I had to rebulild mine before it could be cracked.