Call:

081
013
045
46

nasonaso:
earthrealm pls I need to ask some questions. My number is 0818seven8threesix063.Any installer in Benin or someone you can refer me to

SRNE

Zero-Eight-Zero.... 3449 ...... 0636

brightk:
Any 2.5/3.5kva 24v inverter with lvds and lithium profile charging

DoD for a 24V norminal system should be 24V.

contease:


Having read your extract sir, what then is 50% DoD for a 24v norminal system in Volts... Eg, from 29v to 20v, 21v,22v,23v or 24v use? considering that an rest, a Lead Acid battery would always drop to 26.xV without trickle charge (Float)

Bluegate

Sunnystooth:


I don plead tire... Please house help with recommendations naaa, I don't want to make mistake again.

A good 24V 3.5KVA inverter with budget around 250k naira.

Thanks.

In addendum, dem don change COMPRESSOR before?

bigrovar:


I haven't been frequent here for quite a while so maybe there are context to this question which are not obvious to me.

On the surface though, it is hard to give an answer without additional information.

What battery capacity, size of solar array and size of freezer in question. State all the details so that you can get an informed answer. There is no universal answer to this question.

Nice one.

samir101ng:


I hope this is not too late but you can check out the SRNE Solar Hybrid Inverter:
a. 3.3Kva 24v 500v DC Hybrid for N237,000
b. 3Kva 24v 100v DC Hybrid for N191,000

You can contact Mr Ugo below:
HM Solar Co Ltd
10b Prince Jude Nwabueze Street, Greenfield Estate,
Ago Palace Way, Isolo, Lagos, Nigeria
Olive Estate, Alhaji Ganiyu Olaiya Street, off navy gate
Satellite Town, Lagos
+2348034490636
+2347040329474
+2349050884061
hmsolarcoltd@gmail.com

Get the Chipper App. It has Virtual USD MasterCard for you to make payment anywhere.

As soon as you sign up, an account details will be generated for you. You can fund it via your bank mobile app.

As at today, it's N765 to $1.

isangjohnson:
Has anyone here make purchase in Amazon using naira card?
I was trying to purchase an item of 10k but the payment was declined.

Dreams come to life!

1987 till date!!!

Amazing. 35 years!!!

Straight forward answer? Yes.

But probing further will help make a more informed decision...

Please answer the questions below...

A. What's the make of the inverter?
B. What's your battery bank?
C. How long will the pump run at a stretch?
D. Do you have solar panels, if yes, what capacity?
E. If *D* above is true, will you run the pump during the day(during charging from the panels) or at night?

Jefferyzz:
Can a transformerless 24v inverter with peak n continuous power of 4kw n 2kw power 0.75hp submersible water pump.. note my 2.5kva gen powers it 5n.

*Reliable 3kVA, 24V Zinox Inverter For Sale*

Note:

Never been used though its carton got torn.

Price: 100k.

0.8.03.33.43-911

For Sale:

3kVA, 24V Zinox Inverter for sale.

It has never been used, though carton is bad.

Price: 110k.

What exactly are your loads, I mean what gadgets constitute the 515W?

Sapiosexuality:
Guys, say I'm trying to do a 24hr solar source for about 600W or 1000w, would that be possible with a budget of 350k?

The total load is actually about 515 but I'm trying to raise it to 600 or 1000w (depending on cost). Is the budget enough for 600w and 24hr? If not, what can I can with that budget? Thanks.

The panels are good.

We've had 6 months to a 1 year failure, not just from us but also from people that I know.

ojeysky:


Really? I use sunfit panels and they served well hence I bought sunfit batteries as well for a deployment though not yet deployed...are they so bad with batteries? what's your experience of them?

Congratulations!

Lookout for those batteries, not so good a product. Hook up panels ASAP to extend the batteries life.

ManAdii:
From all I've learnt from this thread I just finished my DIY setup. It consist of the following:
1.2kva TBB inverter
2 * 100AH sunfit batteries
Solar Talkers 40 amps mppt charge controller...

I'm looking at adding panels soon.

I appeal to both parties to please seize fire!

@ZeeStone99:
I seriously doubt if a client would come to a public forum like this to air his discontentment with a service if he isn't pained or incur losses or inefficiently served. Remember, at his first post, he didn't mention your name, so I think he never meant any harm to you nor your brand. He was expressing himself until you identified yourself and came to your defense.

Please NOTE, the issue here isn't about your technical competence, but a third party component which many variables can account for is the crux of the matter.

There's no installer who has done quite a number of roof works that hasn't damaged client's roof before, some times extensively. I've replaced asbestos roofing sheets for a client before.

So many of us still hold you in high esteem in the midst of all of this.

So, brother, simply APOLOGIZE to the client irrespective of how you feel and let this matter rest.

@FireTheSun:
Oga, abeg, no vex!

God bless us, all!

FireTheSun:


You are a Shameless Person, you did an Installation and destroyed the Client's Roof, causing an ongoing leakage situation.
I have been Uploading Pictures of the Damaged Roof where you installed just Ten Units of Solar Panels and the Damage is obvious for everyone to see, yet you are still here lying that l did not show the pictures of the Installation you did!
The Damage is still there till today and you are here mouthing-off saying it is a Professional Installation?
What is "Professional", in destroying a Client's Roof? Or is it that you dont even know the weight and responsibility of calling someone "a Professional"?

- You claim you did not see up to 15holes but you never showed up to inpect the damage, not even once, so how can you see what you did not come to inspect? or am l supposed to take 15 separate pictures to prove to you that there are more than 14holes leaking in my damaged Roof?
- You claim l did not reach out to you, so how come you sent a Roofer down? Where and how did you get the information that you damaged my Roof? Do the Chat exchanges between us, some of which l have posted, not show that l reached out to you, or you are just a congenial liar!

That you sent a Roofer..
WHAT EXACTLY DID THE ROOFER DO, that you are claiming you have REMEDIED the situation of a Client's Roof you damaged with your Incompetence and quackery?
The Roofer plugged some of the leaking Holes, how does that REMEDY the Damaged, Crushed Aluminum Roofing Sheets?
- How does that Stop the DEPRESSIONS you created on my Roof, from retaining Water, which eventually starts leaking into the House?

What Effrontery! All these shameless bravado is what gets people like you into trouble and then you turn around to beg!

Dont know, you are still liable for those damaged Sheets as their is no statute of limitation on when l can institute a Civil Action against you and your Company Mazine Group, for Criminal Negligence and Damage to my property (and you can dare me, and find out).
That l am taking it cool with you, has not removed that option from the Table but if you keep running your Mouth, with this your Quackery and Incompetence, your begging on WhatsApp wont save you, it is Lawyers that would sort this out and Courts can determine whether your actions are Criminal (as a professional Solar Panels that you call yourself) and l am entitled to Financial Compensation or not, even if l dont actually need that sort of money.

You [b]@zeestone99 of Mazine Group is INCOMPETENT and a QUACK who destroyed a Clients Roof and Property, under the guise of doing a Solar Panel Installation[/b]

zeestone99:


Don't mind him. He's bored. Imagine after everyone going their separate ways you wake up after 11months to spread rubbish talks. He didn't even reach out to me.

He's a full blown exaggerator, I didn't even see any 15 holes which I'm very sure he was exaggerating. Someone that can confidently say my people were running on the roof with heavy 535w panels.
All I did was send a professional to take care of it. What more does he expect.

Tell him to send pictures of the installation I did, he won't because he knows it is a professional installation and would make him sound stupid for calling me names.

Not everyone can be saved. Good luck with his installer that installed 8.5kw mismatched panels on 80a cc

Reach me on 0.80.333-439-11

HilcomTech:
Good evening gurus,

Pls does anyone know where I can buy this circuit board?

It is for 10KVA servo PRAG stabilizer. I tried searching on AliExpress without success

You should check for each panel.

You can assume values for panels of same parameters when doing calculations.

Any panel can fail in an array even though they were installed at the same time.

Check the panels diodes and cables too.

A panel may read expected voltage but you won't get its expected current because of a bad or defective panel cable.

brightk:
i only checked one panel with a pv meter. it was showing 22v and 4.99a (btw 1.30-2.30) translating to the 110w shown on the pv. i didn't check on the rest because they were same specs

Quite vulnerable!

The war is no long a walk-in-the-park for Russia anymore!

We're getting it right gradually!

Well, I still see that man in the light of his years as a labour leader. And his recent political travails should have taught him a lesson and properly reset his brains.

JudasNaKarrot:
I did not curse you o, except that you're reading it upside down.

But why are you supporting those who have already destroyed this country. Is there no other candidate?
Or are you guys doing this because he is " my brother" and "my tribesman". That same religious and ethnic sentiments that has kept Nigeria where it is today that the common man cannot feed.

Have a rethink dear.

I reject that!

God bless you.

JudasNaKarrot:
God publish you there.

We need his likes to stir things up!

Check the frequency of the generator. This may most likely be the issue.

The frequency should be 50Hz otherwise get a generator technician to tune it. Changing the generator AVR also can fix the frequency issue.

We're waiting for your feedback.

rowon:
Hi guys
I have a generator 9-10 kva that I use to power my 2kva luminous cruze inverter. The Generator is about 10months old. Recently the generator stop charging my batteries 2 pieces of 240Ah but NEPA still charges when the voltage is not low.my technician said I would need external 30amp charger which will work for both generator and NEPA.please guru I need your advice

Call:

.0.80.333.43911

SonyaSpence:

hello, where can I get these?

Quite a humble lieutenant!

GSR, Hausstrom, Glow!

GSR: 2 Years Warranty
Hausstrom and Glow: 18 months warranty.

All made in India!

Opistorincos:
Good evening house, which tubular battery brand is rugged and long lasting?

Great.