|Register On Nairaland / LOGIN! / Trending / Recent / New|
Stats: 2,962,601 members, 7,187,667 topics. Date: Saturday, 26 November 2022 at 12:43 PM
|Step-by-step Method Of Writing Contiki Programs by funkymedina: 10:24am On Jan 19, 2013|
this is taken from http://www.wsnmagazine.com . Al about wireless sensor networks & a great site!
Hands –on simple instructions on how to program WSN motes on the Contiki operating system platform is illustrated here. This is one of the experiences I had while attending the CONET summer school of 2011 with the developers of Contiki. If you are familiar with C programming even for a little bit, you can write programs for Contiki operating system easily after learning the basics which are specific to Contiki operating system. After writing the very first Contiki program, most of the convensions that you have to follow will be clearer.
The most exciting thing we can find as a WSN programmer is the proto-threads in Contiki. Proto-threads allow us to write multi-threaded applications on top of the Contiki operating system. Therefore we can get rid of writing codes to implement state machines to run on the event driven kernel. The below program is the simplest Contiki program you can write which contains most of the necessary components that should be included in any Contiki program.
1: #include “contiki.h”
2: #include <stdio.h>
3: PROCESS(my_first_process, “Hello World Process”);
5: PROCESS_THREAD(my_first_process, ev, data)
8: printf(“Hello WSN World!\n”);
Save this file as hello_world.c
The header file “contiki.h” which is included at the very first contains all the declarations of the Contiki operating systems abstractions. stdio.h is included only because I have used printf() function inside the program. The Macro in third line declares a new Contiki process. First parameter of it is the variable for the process and the second parameter is a string name for the process. Fourth line, specify that this process should be started in the startup of the Contiki operating system. Therefore, when the hardware device which will be the destination of compiled code switches on, our process also begins running.
Fifth line of the code opens the definition of our process. As the first parameter, we pass the process’ variable which is my_first_process in this scenario. The second parameter is ‘ev’ which is the event parameter. It can be used to make the program responding to events that occur in the system. The third parameter ‘data’ can be used to receive some data which are coming with those events.
The rest of the instructions of the Contiki process will be included inside two important lines which are PROCESS_BEGIN() and PROCESS_END(). In our Contiki process we just print a string. This output goes to the standard output in the platform where our code will be running. If you compile this code to native platform and run in the terminal, the output will be printed in the terminal. If you run this in a mote, the output most probably will goto the UART port of the mote. However this behavior depends on the design of a particular WSN mote.
Now we have a Contiki program with us. To compile it, we need a Makefile which contains the instructions for the compilation tools to do the task. Therefore create a new file with your text editer and put the below content in it. Save it as Makefile. No file extention needed for it.
2: include $(CONTIKI)/Makefile.include
Lets compile our code. Before everything you have to have downloaded the Contiki source code. click here and download the latest Contiki source code. Uncompress the zipped file and place in somewhere in your PC. First we compile the code to native platform. For that, do the following steps.
1) Put the hello_world.c and Makefile files in a new directory. Let’s say you place them in a directory named “my_app”.
2) In the first line of your Makefile, put the correct path to the directory where your downloaded and unzipped Contiki source code resides. As an example if your Contiki source code is located in the path “/home/aps/Desktop/contiki-2.4″, your first line of the Makefile should look like below.
You don’t have to give absolute paths always. It’s ok to give relative paths also.
3) Now goto “my_app” directory from the terminal and issue the following commands,
make TARGET=native hello_world
If everythings ok, terminal will give an output like this,
Hello WSN World!
4) To stop running Contiki, give a CTRL + C on the terminal.
Let us assume that you have real hardware also to test this. For example, a MSB430 motes. Put the batteries to it and switch on. Plug it to your PC with the serial cable provided with the motes. Now goto “my_app” directory from the terminal and issue the following commands,
sudo chmod 777 /dev/parport0
make TARGET=msb430 hello_world.u
Now the compiled code will be written to the flash memory of the MSB430 mote. After it completed writing to flash, remove the mote from the serial cable. Actually as soon as the flash memory writing is complete, Contiki OS will be running with your application on the mote. But you can’t see the output it generates on its pins. To see it, connect the mote with the provided USB cable to the PC. Now open a terminal and issue the following command.
Check whether there’s a device in the listed output named something like ttyUSB0 or ttyUSB1. Let’s say its ttyUSB0. This is the mote that is connected to your PC. So, issue this command now.
Terminal will now hang and listen to any output coming from there. Switch off the mote and on again. You will see the output from the terminal now. The way we connect different types of motes to the PC are different. But the command you issue in the terminal to compile and upload the Contiki source differ only from very small things. When you compile this application to the MicaZ motes, the command you issue will be,
make TARGET=micaz hello_world.upload PORT=/dev/ttyUSB0
Now you have a basic understanding on writing programs for Contiki. You can find more code examples in the ‘examples’ directory of the Contiki source code. If you don’t have real sensor network hardware to run and test Contiki applications you write, you have another way to fulfill your requirement. There are Simulators for that purpose. Some simulators are instruction level simulators like MSPSIM and Avrora while some simulators are network level simulators like Cooja.
You can use Contiki source code directly on your Ubuntu PC instead of using Instant Contiki. However according to the error that you got, I think the UISP tool is not installed in your platform. Try typing uisp on the shell to find it. However the default UISP tool which gets installed by typing
apt-get install usip
doesn’t work sometimes with MIB510 programmer boards for MicaZ as I’ve learnt. Therefore I installed it by downloading from somewhere else. Try this to install UISP,
1. Download UISP from here,
2. Goto the downloaded location from the shell and issue the following commands,
# tar -xvzf uisp.tar.gz
# cd uisp
# sudo make install
If you have contiki source code, goto the location
There’s a file named “example-multihop.c” in that directory. You can try this example by running on Cooja simulator. To do it, goto that directory from the shell and issue the following command.
make TARGET=cooja example-multihop.cooja
This will open a Cooja window with the example. To trigger a mote for starting the functionality, right click on a mote and select the option “Click Button on Contiki”. (I assumed that you are familiar with Cooja simulator)
I hope this material will give you the basics of programming with Contiki even if you are a novice in C programming.
|Re: Step-by-step Method Of Writing Contiki Programs by lordZOUGA(m): 12:53pm On Jan 19, 2013|
contiki OS.. Interesting..
Programmers, How Is This Recession Affecting Your Work? / Android Developers : Building Your Android Library And Add It To Maven Central / If You Are A Developer, Take This Survey And Win $1000(New Survey )
|Sections: politics (1) business autos (1) jobs (1) career education (1) romance computers phones travel sports fashion health |
religion celebs tv-movies music-radio literature webmasters programming techmarket
Nairaland - Copyright © 2005 - 2022 Oluwaseun Osewa. All rights reserved. See How To Advertise. 94