Color Stone Chip Coated Steel Roof Tile Forming Machine

Specifications of Color Stone Chip Coated Metal Roof Tile Forming Machine

Color Stone chip coated steel roof tile sheet is formed by 0.4mm Al-Zn plating panel and color stones. It is modern,environmental and nice appearance. colorful coated metal roof tile is a new advanced roof material which adopt the high and new technology,use the non-corrosibility al-zin steel as the basic plate,use the acrylic resin which has the good weather resistance as the adhesives,use the colorful natural sandy gravel as the surface.Because of its nice appearance,lightweight,durable and environmental,it is becoming the major product in the international roof materials in recent years, and it is also used in the high-grade building in domestic,it is enjoying a great popularity all over the world.

Main Components

Steel Roof Tile Molding Machine ---------------------------------------1 Unit
Automatic Bottom Glue Spraying Device--------------------------------1 Unit
Automatic Sandblasting Ropm -----------------------------------------1 Unit
First Drying Room ---------------------------------------------------- 1 Unit
Automatic Surface Glue Sapraying Device ------------------------------1 Unit
Second Drying Room Equipment ----------------------------------------1 Unit
Runout Table ----------------------------------------------------------1 Unit
[img][/img][img][/img][img][/img][img][/img]

Name: Jim
Add: Nancang Street ，Botou city， Hebei Province
Tel: 86-317-8228588
Fax: 86-317-8319789
Mobile: 86-15075442679
Email: sales@kinberlymc.com
www.kinberlymc.com

Customer order Composition of Stone Chip Coated Metal Roofing Tile Machine
This machine is customer order ,dry part adding the heat air from the waste heat boiler After dry processing

1.NC Bottom Glue Spray Section
Dimensions (mm): 4000×1350×850
Structure: Welded Work of U beam and Steel Sheet
Drive: 2.2kw frequency modulation motor rated 0~32 revolutions/min
Transmission: reciprocation chain
Spray motor: electric motor 0.06kw
Adsorption deducting device: 1 set
Air compressor: 1 set, 0.9 m3
Pressure glue tank: 1 set, pressure: 0.1-0.6MPa
Glue gun jet: 4 sets
Manual glue spray gun: 5 sets
Spray gun stand: 1 set

2.NC Sand Spray Chamber: 1 set
Dimensions: 3000*1850*700mm
Structure: Welded Work of U beam and Steel SheeetDuplex chain transmission driven by the same motor for glue spray section
Duplex chain transmission
Sand tank: 1, 550*600*500mm
Automatic Lift: 1 set. Lift height: 1.9 meter. Power: 300kg/hour
Sand jet: 4 set

3. First baking oven: 1 set
Dimensions: 25×0.8×1.2M
Welded structure with carbon steel
Oven chamber: sandwich walled chamber with temperature isolation between 1 mm carbon steel sheet
Automatic temperature controller: 2 sets. Controlling range: 0-160℃
Infrared fluorescent tube: 50 pcs
Transmission: reciprocation chain
Cooling device: 1 set

4.NC face glue spray equipment
Dimension: 3000×850×700
Welded structure with carbon steel
Automatic glue spray gun: 2 sets
Automatic spray assembly: 1 set. Pressure range: 0.1-0.6 MPa
Adsorption deducting device: 1 set
Manual glue pray gun: 5 sets

5.Secondary baking chamber
Dimension: 30000×850×700 mm
Welded structure with carbon steel Oven chamber: sandwich walled chamber with temperature isolation between 1 mm carbon steel sheet
Automatic temperature controller: 2 sets. Controlling range: 0-160℃
Infrared fluorescent tube: 50 pcs
Transmission: reciprocation chain of 30 meter distance.
Cooling device: 1 set
Marking device: automatic marking machine: 1 set.
General electrical control cabinet: 1 set
Productive capacity: 1500 pcs /8h shift
Overall power: 113 kw

Installation Picture

stone coated machine test




KINBERLY INDUSTRY CO.,LTD
Address: Nan Cang Stree,Botou City, Hebei Province,CHINA 062150
Fax: 86-317-8319789
Tel: 86-317-8228588
Mobile: 86-15075442679
Email:btjbl@hotmail.com
www.kinberlymc.com