You can check me out on Linkedin https://ng.linkedin.com/pub/osaki-lawson-jack/21/850/236

hello everyone especially the 'clausthalers',

It's been a very long time. I got an e-mail from TU Clasuthal requesting for an interview this week. In the content, I was asked to give my skype name, day and time that I will be ready for the interview. i have replied already but there hasn't been any response from them .

For those who have gone through the interview process, do they [TU Clasuthal] add you to their contacts on the D-day or you get a notification earlier.

Thank you.

mannimakerjnr:
hello everyone especially the 'clausthalers',

It's been a very long time. I got an e-mail from TU Clasuthal requesting for an interview this week. In the content, I was asked to give my skype name, day and time that I will be ready for the interview. i have replied already but there hasn't been any response from them .

For those who have gone through the interview process, do they [TU Clasuthal] add you to their contacts on the D-day or you get a notification earlier.

Thank you.

Hi mannimakerjnr.

You will be added few minutes to an hour before the scheduled time for the interview (unless a new approach i'm unaware of is now in place). Prepare well for the interview and dazzle your audience. Besides, which discipline did you apply for?

devmantic:

Hi mannimakerjnr.
You will be added few minutes to an hour before the scheduled time for the interview (unless a new approach i'm unaware of is now in place). Prepare well for the interview and dazzle your audience. Besides, which discipline did you apply for?

I have applied to study Drilling Engineering at the Institute. Also planning to research on Drilling technology or completions (Mud and Cementing).

If you need any of the offshore and plant engineering software. Please contact me at 07087210933 or WhatsApp me @08093852664. Cheers

mannimakerjnr:


I have applied to study Drilling Engineering at the Institute. Also planning to research on Drilling technology or completions (Mud and Cementing).

Cool. I don't really know much about the interview process for Drilling and Production Engineering but I could find out for you and give you a response sometime soon. I'm more familiar with the Reservoir Engineering Department interview process. All the same, I wish you the very best in your interview.

P.S: When is it actually holding?

devmantic:

Cool. I don't really know much about the interview process for Drilling and Production Engineering but I could find out for you and give you a response sometime soon. I'm more familiar with the Reservoir Engineering Department interview process. All the same, I wish you the very best in your interview.
P.S: When is it actually holding?

Sorry I couldn't get to you in time. It was held today at 10:00 GMT. It went well thou. Questions like, why Germany, why Clausthal and interests. Also very basic questions like area of a triangle, volume of a cylinder, Force and some integration. Indeed, I was and am still shocked. . I thought the questions were going to be a bit .... Thank God for today.

mannimakerjnr:


Sorry I couldn't get to you in time. It was held today at 10:00 GMT. It went well thou. Questions like, why Germany, why Clausthal and interests. Also very basic questions like area of a triangle, volume of a cylinder, Force and some integration. Indeed, I was and am still shocked. . I thought the questions were going to be a bit .... Thank God for today.

That's great. I guess your interviewer was in a good mood . I'm sure you will be admitted into the programme. You can start making plans for the entire visa process.

Please house I need an urgent help for drilling fluid specialist materials. I have Bsc Pure & Applied Chemistry, Professional National Diploma in Safety and Security Management. I applied for drilling fluid specialist position on Schlumberger Careers website sometimes ago. They just got back to me that they are interested for my CV and will schedule for assessment later. I have never attend Mud school, but have a wealth of experience on oilfield with fugro Nigeria Limited as a environmentalist. Please also enlighten me for this Mud Engineer or drilling fluid specialist duties. I knew they will train me if I succeed. But I want to have first hand knowledge. This is my email victor.victor.ifiri@gmail.com

ITbomb:
@Orbaxy
I'm pursuing a masters course in Petroleum Engineering
and I will really appreciate help in terms of knowledge resources like the IWCF manual
my e-mail is
ultafuto
@
yahoo
.
.
co
.
.
uk
thanks

please share the manual with me if you have access to any. Louis_favour@yahoo.com is my mail ID.
Regards.

Welldone sir. Am also a graduate of chemical/petrochemical engineering. I have love for drilling and would delve into it if I am given proper orientation. These questions bother me.
1. I have no industrial experience, is it wiser I gun for a masters degree or acquire certificate?
2. What professional courses should I acquire as a chemical engineer that dreams of working offshore?

dosage:
Hey, am so so impressed with this thread and I have been hopeful that one day something like this will come up in NL.Actually  am new here but I hope to contribute my own quote on any topic.am a graduate of chem eng but i work now as a drilling engineer in an indigenous drilling company here in 9ja.am also a professional well planner and anti collision expect.am good in directional drilling software's  like compass and well plan etc. dr.ferlie is nice to have you on this thread at least to tell us more on related topics.

Hi manni, pls I want to know how you applied to clausthal university. I need a guide as I have strong intentions of doing masters degree with the university

mannimakerjnr:


I have applied to study Drilling Engineering at the Institute. Also planning to research on Drilling technology or completions (Mud and Cementing).

Good day beloved.
Plz can someone help me with any good school in Ireland where I can do my MSc in drilling.

devmantic:

Cool. I don't really know much about the interview process for Drilling and Production Engineering but I could find out for you and give you a response sometime soon. I'm more familiar with the Reservoir Engineering Department interview process. All the same, I wish you the very best in your interview.
P.S: When is it actually holding?

Hello Bro.I recently got invited for a Skype interview by IFP for Reservoir and Geoscience engineering. Please can you give me some pointers on what to expect?

DrFerlie:
I have decided to create a thread for drilling engineers and drilling supervisors ( company man ), so that we can share experience and best practices.

I am currently working on a BOD for a deepwater field development - drilling and completion.


Guys, come in and let's discuss.

Wow..,.. It's been a while. Concluded mud engineering from pti. How's your end ?

I was told about the INTERNATIONAL BOARD FOR OFFSHORE AND SUBSEA ENGINEERING AND TECHNOLOGY (IBOSET) by my colleague here at work.......I have checked out their site www.iboset.org and are cool. We are trying to process membership registration with them. Can anyone here who is a member or members they hip of similar professional body help me out (as a reference/sponsor)........this is a requirement for the registration.

Thank you in advance.

Hello there, I'm Kingsley Emenike. Just passed out from the National Youth Service Corps (NYSC) program November 4, 2016. Please I need a job, Studied Gas Engineering. Please someone should hook me up to any of these oil and gas coys, my Cover Letter and CV are ready. I'll so much appreciate. Thank you. Email: Kingsmecca@gmail.com.

Please your contributions and suggestions are needed urgently.

A well is to produce from 3 payzones without commingling, which of this completion configuration best fit the design process.
1. Using SINGLE STRING SELECTIVE COMPLETION where the zones are produced one after the other. The bottom produces first to abandonment and is plugged in then the second bottom is open for production and so on.
2. DUAL STRING - TRIZONE COMPLETION where the well produces from two tubings (bottom and second bottom Payzone) while the uppermost zone produces from casing.
3. MULTI-ZONE TRIPLE COMPLETION where the well produces simultaneously from 3 tubings.

Note: the well is to produce without commingling.

Good evening House,

I am applying fro subsea engineering at the University of Texas, with the current economic situation, i dont know if 8.5M NGN would be enough cash to go through the program. Also they asking for recommendation letters, how can i get this easily as i dont have any contacts

Hello house.
Please what's the deepest and shallow oil well in Nigeria and in the world?

petengine:
Please your contributions and suggestions are needed urgently.

A well is to produce from 3 payzones without commingling, which of this completion configuration best fit the design process.
1. Using SINGLE STRING SELECTIVE COMPLETION where the zones are produced one after the other. The bottom produces first to abandonment and is plugged in then the second bottom is open for production and so on.
2. DUAL STRING - TRIZONE COMPLETION where the well produces from two tubings (bottom and second bottom Payzone) while the uppermost zone produces from casing.
3. MULTI-ZONE TRIPLE COMPLETION where the well produces simultaneously from 3 tubings.

Note: the well is to produce without commingling.

To answer the question, dual string would be a preferred option for this scenario

eimuhb:


To answer the question, dual string would be a preferred option for this scenario

Thanks

petengine:
Please your contributions and suggestions are needed urgently.

A well is to produce from 3 payzones without commingling, which of this completion configuration best fit the design process.
1. Using SINGLE STRING SELECTIVE COMPLETION where the zones are produced one after the other. The bottom produces first to abandonment and is plugged in then the second bottom is open for production and so on.
2. DUAL STRING - TRIZONE COMPLETION where the well produces from two tubings (bottom and second bottom Payzone) while the uppermost zone produces from casing.
3. MULTI-ZONE TRIPLE COMPLETION where the well produces simultaneously from 3 tubings.

Note: the well is to produce without commingling.

Since production is without commingling , Multi Zone Triple Completion is the best .

Hi House,


Can i please, anyone or a link to any lecturer preferably UNILAG from the Chemical Engineering Dept. to take private coaching classes in

1.) Instrumentation and Control in chem eng

2.) Process Design in Chem eng


Please, the person can be a PHD student or possess an M. Eng & at least one year lecturing experience in this field and must also be lecturing currently.

Location. Island, Lagos.

Period: Dec.20 - 1st Jan

Interested person can drop me a mail on adeola0072003@yahoo.com or send a msg here.

Fees: Negotiable.

thanks

Hi Everyone,

I know it's a rough patch for Drilling engineers right now, but if anyone knows any local operators hiring please let me know, I really need a Well Engineering (Front-End Drilling Engineering) role ASAP.

Emeka / MacDonald

Hi everyone,

If there is any opening for a roustabout or a trainee drilling / completion engineer, I am very much available. I am much more interested in getting the field experience and on-the job training, than the compensation package. Please contact me if there is any available.

petengine:
Please your contributions and suggestions are needed urgently.

A well is to produce from 3 payzones without commingling, which of this completion configuration best fit the design process.
1. Using SINGLE STRING SELECTIVE COMPLETION where the zones are produced one after the other. The bottom produces first to abandonment and is plugged in then the second bottom is open for production and so on.
2. DUAL STRING - TRIZONE COMPLETION where the well produces from two tubings (bottom and second bottom Payzone) while the uppermost zone produces from casing.
3. MULTI-ZONE TRIPLE COMPLETION where the well produces simultaneously from 3 tubings.

Note: the well is to produce without commingling.

well in this case as always, since the aim of a petroleum engineer is to optimize profit and save time; the best design process would be multi zone triple completion.


please people as a graduate of petroleum engineering who has passion for the job am pleading with anyone and everyone who has got an internship slot or information to please hook me up with such coy, i don't mind not been paid as my earnest desire is to acquire the necessary field expertise....

HELP A BROTHER IN BUILDING HIS PROFESSION

Here's my email address: saintnnamcy@Gmail.com

orbaxy:


Natgas, i have some IWCF well control manuals. it's quite bulky so i cant upload it on this blog. I'll need your email to forward same. Thats if you're interested. cheers

We prepare university undergraduates for employments in Oil & Gas / Refining / FPSO and LNG/GTLs industries in Nigeria.REGISTER NOW
TRAINING COMMENCES 3RD OF MARCH,2017

Why did this thread die ?

Hello folks, I need a training service provider for a course in Advanced drilling fluids engineering.....preferably international.
Thanks