Hello

I just bought an Honda Civic 2007 European Spec..

Heard several stories about how fuel efficient it is

However, to my surprise I really haven't seen much, as it zap my fuel..

Scanned it and it brought out PO135, PO141 and some other emission code..


The above codes indicates an issues with the two Oxygen Sensor on the car.

Mearly inspecting, you could see that the O2 sensor Bank 1 Sensor 2 has been cut off while sensor 1 is still connected..

But since the code indicate issues with the two sensors, I have been trying to get them around my place at akure but non of the spare parts dealer I know seems to have

So, Pls am in need of both air fuel ratio sensor and oxygen sensor for Honda civic 2006 European spec..

You can see picture of the air fuel ratio sensor (oxygen sensor 1 bank 1 )

However, I dont have any picture to display for the second Oxygen Sensor ( O2 sensor 2 bank 1)

Pls for Honda Civic 2007 European spec

Thanks.



Thanks

samintegrity:
Hello

I just bought an Honda Civic 2007 European Spec..

Heard several stories about how fuel efficient it is

However, to my surprise I really haven't seen much, as it zap my fuel..

Scanned it and it brought out PO135, PO141 and some other emission code..


The above codes indicates an issues with the two Oxygen Sensor on the car.

Mearly inspecting, you could see that the O2 sensor Bank 1 Sensor 2 has been cut off while sensor 1 is still connected..

But since the code indicate issues with the two sensors, I have been trying to get them around my place at akure but non of the spare parts dealer I know seems to have

So, Pls am in need of both air fuel ratio sensor and oxygen sensor for Honda civic 2006 European spec..

You can see picture of the air fuel ratio sensor (oxygen sensor 1 bank 1 )

However, I dont have any picture to display for the second Oxygen Sensor ( O2 sensor 2 bank 1)

Pls for Honda Civic 2007 European spec

Thanks.



Thanks

Contact luvinghubby here on nairaland. Search his name. He is nairaland Honda parts specialist

Dozieson:


Contact luvinghubby here on nairaland. Search his name. He is nairaland Honda parts specialist

Thanks bro

Purchased from luvinghubby..

Great man I must say.

The items came in same day of purchase, only thst the driver landed in Akure from Lagos very late at night.

Will install afterwards today...

I recommend luvinghubby for your Honda parts need.

Thanks.

samintegrity:
Purchased from luvinghubby..

Great man I must say.

The items came in same day of purchase, only thst the driver landed in Akure from Lagos very late at night.

Will install afterwards today...

I recommend luvinghubby for your Honda parts need.

Thanks.

You Gerrit

samintegrity:
Purchased from luvinghubby..

Great man I must say.

The items came in same day of purchase, only thst the driver landed in Akure from Lagos very late at night.

Will install afterwards today...

I recommend luvinghubby for your Honda parts need.

Thanks.

After installing, codes 135 and 141 must disappear. You will also notice a considerable improvement in fuel economy. Don't forget to come back here and share the outcome.
Regards

Structuralman:


After installing, codes 135 and 141 must disappear. You will also notice a considerable improvement in fuel economy. Don't forget to come back here and share the outcome.
Regards

I hope so too..

However I am yet to install oo, went to 3 different rewires oo they didn't have a socket to remove the top one oo..

I still dey carry ham around so..

Maybe tomorrow I will go look for the 22mm 02 sensors socket.

Our technicians are something else

samintegrity:


I hope so too..

However I am yet to install oo, went to 3 different rewires oo they didn't have a socket to remove the top one oo..

I still dey carry ham around so..

Maybe tomorrow I will go look for the 22mm 02 sensors socket.

Our technicians are something else

Lolz. Most of them don't know much about oxygen sensors. Their own is to kazeemize our cars till final burial

Dozieson:


Lolz. Most of them don't know much about oxygen sensors. Their own is to kazeemize our cars till final burial

Lol �

Let me shock u, 2 of them argued seriously with me that it doesn't really need to sensor to control the fuel..

They said it's plug ooo..

I just walk away..

Something I scanned that shows open loop.

Those guys need some retouching

samintegrity:


Lol �

Let me shock u, 2 of them argued seriously with me that it doesn't really need to sensor to control the fuel..

They said it's plug ooo..

I just walk away..

Something I scanned that shows open loop.

Those guys need some retouching

If you were here in Lagos, you would have gotten competent rewires who have dealt with this issue.

Structuralman:


If you were here in Lagos, you would have gotten competent rewires who have dealt with this issue.

True

samintegrity:


Lol �

Let me shock u, 2 of them argued seriously with me that it doesn't really need to sensor to control the fuel..

They said it's plug ooo..

I just walk away..

Something I scanned that shows open loop.

Those guys need some retouching

Gbam

samintegrity:


True

To replace that O2sensor1 on bank 1 requires a special spanner cos of the tight cylindrical shell it sits in.
Some people remove that shell completely.

chillex8:

To replace that O2sensor1 on bank 1 requires a special spanner cos of the tight cylindrical shell it sits in.
Some people remove that shell completely.

Very true..

Will look for the 22mm O2 sensor socket, today

Thanks

samintegrity:


Lol �

Let me shock u, 2 of them argued seriously with me that it doesn't really need to sensor to control the fuel..

They said it's plug ooo..

I just walk away..

Something I scanned that shows open loop.

Those guys need some retouching

O2 sensor 1 is responsible for closed loop operation when the car gets to operating temperature.

Post catalytic O2 sensor basically tells u about the catalyst. Has no business with fuel consumption.
Your catalytic converter is over 200k last time I checked.

Secondly, hope you bought brand new O2 sensor 1.
E get why....

chillex8:

O2 sensor 1 is responsible for closed loop operation when the car gets to operating temperature.

Post catalytic O2 sensor basically tells u about the catalyst. Has no business with fuel consumption.
Your catalytic converter is over 200k last time I checked.

Secondly, hope you bought brand new O2 sensor 1.
E get why....

I believe I bought brand new sir..


Thanks for the input.

chillex8:

O2 sensor 1 is responsible for closed loop operation when the car gets to operating temperature.

Post catalytic O2 sensor basically tells u about the catalyst. Has no business with fuel consumption.
Your catalytic converter is over 200k last time I checked.

Secondly, hope you bought brand new O2 sensor 1.
E get why....

Why?

samintegrity:


I believe I bought brand new sir..


Thanks for the input.

When i had this issue, i cut offf d wires of d sensor, used a long 22mm socket, hand d tighthened d new one and dat was it u cab eveb use a 22 flat to try tighten a bit. I later got the 02 sensor wrench. Wld have sent it to u but ill need to search a lot of boxes. Dat time is d problem

Joehigashi:


When i had this issue, i cut offf d wires of d sensor, used a long 22mm socket, hand d tighthened d new one and dat was it u cab eveb use a 22 flat to try tighten a bit. I later got the 02 sensor wrench. Wld have sent it to u but ill need to search a lot of boxes. Dat time is d problem

Thanks bro .

Pls help me check oooo...

Will try and look out for it again today

Thanks everyone for the input...

I reached out to Gazza, and he gave me a hint..

I wanted to buy the 22mm O2 sensor Socket from Gazza, but he didn't have ..

So he suggested I buy the Normal 22mm socket and get a welder to cut it out..

Which I did this morning, bought the normal socket, have my welder cut it out and weld a small pipe to extend its housing..


Victory at last, both sensor removed and replaced..


However, or unfortunately, only the second one worked.

As the one I removed from the sensor 1 is different from the one sent to me..

I have reached out to luvinghubby, will feedback once I get it all sorted out..

Btw, who can help me with this two codes..

Pic 1. The sensor 1 I removed
Pic 2. What I got.

Pic 3 the codes after scan

samintegrity:
Thanks everyone for the input...

I reached out to Gazza, and he gave me a hint..

I wanted to buy the 22mm O2 sensor Socket from Gazza, but he didn't have ..

So he suggested I buy the Normal 22mm socket and get a welder to cut it out..

Which I did this morning, bought the normal socket, have my welder cut it out and weld a small pipe to extend its housing..


Victory at last, both sensor removed and replaced..


However, or unfortunately, only the second one worked.

As the one I removed from the sensor 1 is different from the one sent to me..

I have reached out to luvinghubby, will feedback once I get it all sorted out..

Btw, who can help me with this two codes..

Pic 1. The sensor 1 I removed
Pic 2. What I got.

Pic 3 the codes after scan

You see why I said e get why?
To get that direct sensor, hard.

P.S hope your CTS, thermostat and cooling fans are working as they should.

samintegrity:
Thanks everyone for the input...

I reached out to Gazza, and he gave me a hint..

I wanted to buy the 22mm O2 sensor Socket from Gazza, but he didn't have ..

So he suggested I buy the Normal 22mm socket and get a welder to cut it out..

Which I did this morning, bought the normal socket, have my welder cut it out and weld a small pipe to extend its housing..


Victory at last, both sensor removed and replaced..


However, or unfortunately, only the second one worked.

As the one I removed from the sensor 1 is different from the one sent to me..

I have reached out to luvinghubby, will feedback once I get it all sorted out..

Btw, who can help me with this two codes..

Pic 1. The sensor 1 I removed
Pic 2. What I got.

Pic 3 the codes after scan

Did you get these codes after installing the sensor?

See link below for help

https://www.700r4transmissionhq.com/p0453-honda-accord/

chillex8:

You see why I said e get why?
To get that direct sensor, hard.

P.S hope your CTS, thermostat and cooling fans are working as they should.

By as they shd I want to believe you meant the fans are not coming up immediately after start up?

If yes, then am sorry to disappoint you, they blaze on once the car start up

Dozieson:



Did you get these codes after installing the sensor?

See link below for help

https://www.700r4transmissionhq.com/p0453-honda-accord/

Nooo bro

Those codes were there before, I didn't just felt the need to fix it, but I recently read the fuel tank pressure sensor too could affect the fuel efficiency.

Don't know how true thou.

samintegrity:


Nooo bro

Those codes were there before, I didn't just felt the need to fix it, but I recently read the fuel tank pressure sensor too could affect the fuel efficiency.

Don't know how true thou.

When you are done fixing the other sensor then will know if it truly affect fuel efficiency

samintegrity:


Nooo bro

Those codes were there before, I didn't just felt the need to fix it, but I recently read the fuel tank pressure sensor too could affect the fuel efficiency.

Don't know how true thou.

I don't think It will affect fuel efficiency from my little research online

samintegrity:


Nooo bro

Those codes were there before, I didn't just felt the need to fix it, but I recently read the fuel tank pressure sensor too could affect the fuel efficiency.

Don't know how true thou.

Seems the O2 sensors come in 4 pins and 6 pins. Be sure to get the correct one from Luvinhubby

Thanks bro

Already reached out to him.

Thanks again

Dozieson:


Lolz. Most of them don't know much about oxygen sensors. Their own is to kazeemize our cars till final burial

Lol. They have A1 in removing thermostats and connecting fan direct

samintegrity:
Purchased from luvinghubby..

Great man I must say.

The items came in same day of purchase, only thst the driver landed in Akure from Lagos very late at night.

Will install afterwards today...

I recommend luvinghubby for your Honda parts need.

Thanks.

how much did you buy it?

mabeni:
how much did you buy it?

The price is depends on how much it was imported for.. the price i bought may be slightly different from yours..

To ans your question, it cost me 14k each both cost 28k

samintegrity:


The price is depends on how much it was imported for.. the price i bought may be slightly different from yours..

To ans your question, it cost me 14k each both cost 28k

Hope it worked and the aim achieved