spyder880:


N13,000 for 7 ft height
N20,000 for 8 ft height

Much obliged

spyder880:
Then there are the wooden frames, 10" wide, 2" thick.

How much will a frame like this cost please, tnx

Anyone applied for this?

Westerfield College is in need of part-time marketers in the following locations: Kwara, Niger, Ondo, Katsina, Bauchi, Enugu, Imo, Delta, Anambra, Yobe, Katsina, Gombe, and Sokoto.

Here's some of the requirements the ideal candidates should have:
A minimum of first degree in any management science/social science-related discipline preferably in mass communication, Business administration, and Marketing.
Minimum of 3 years Post NYSC cognate marketing experience. Two out of which should be in an educational environment or service delivery sector.
Read more about this opening here: https://westerfieldcollege.com/we-are-hiring/

To apply, have the candidate/s send their CV to: hrtemp@westerfieldcollege.com or reply to this email with the CV.

chukwudinwez:


13th April

Ok thanks....Best of luck, pray you get in.

You are being employed as an Experienced hire hence why yours seem different.

chukwudinwez:
I applied as a software developer. Seems my own procedure is quite different. I have written the first test(purely about software development), had an interview with the HR, had another interview with the Chief information officer, submitted about 3 forms including an evidence I've once been paid a salary in the past one year, supposed to have another HR interview last week which didn't hold. Tomorrow morning I'm going to have another interview. Who else applied as a software developer.

Please when did you write your first test?

EgunMogaji2:


Frame #1 for me.

Just love that tile, elegant and simple

Teewhy2:


sir,
The reason we avoid cost and phone no display is because a lot of fraudulent people are online and they use people's profile to scam people, we were almost a victim but thank GOD a vigilant and good nairalander sent in a message to verify if we know about this transaction and phone nos.
In terms of cost the difference in POP ceiling and Polystyrene ceiling is not much but it has more advantage.
1) it helps to prevents loss of energy within an area it is used
2) it prevents water leakage from leaking roof into the building and doesn't draw maps caused by water leakage.
3) it reduce noise transmission better than POP materials.

Thanks

Teewhy2:


sir,
can you send me the architectural design of the place to take measurements of the sitting room and make estimate.
you can send it to me on frugesarenaltd@gmail.com

You are not getting my inquiry sir, you know what one can consider a standard sitting room, you are in the business. Just give me a ballpark quotation of what it takes to put a ceiling over a standard sitting room. I have noticed you avoid making your costs public and that's not good advertising, also you are selling polystyrene as a cheaper alternative to the others so lets see the cost savings

Teewhy2:


sir,
we do ceilings as well.

Lovely work

Sorry you did not address the second part of my post, what will be the cost estimate for covering a standard sitting room

Teewhy2:
Happy new month to all our beloved customers and well wishers.
This month will bringing more financial breakthrough to you.

Most of this thread is focused on parapet fascia, don't u handle ceilings? I have seen some polystyrene ceilings and i must say one cannot tell the difference from POP.

If you handle can we get like a ball park estimate of what it will take to cover a standard sitting room

chidi4eze:
Good morning
Please what kind of windows would you suggest for this building. Location is Port Harcourt

The size and shape of the window openings scream casement

n3xt:


Just check 90% of the building sold at over N100m in Banana Island and see how many of them have casement windows

Sliding is not old school. The way we design our windows is.


________

Pics - These are houses with sliding windows.

Food for thought

At the end of the day i guess the deciding factor will be taste seeing as there really isn't that much of a cost difference all things considered. And these days most people just go with what is trending rather than risk doing something new.

Adedward:
yah, I always advice casement for my most of clients, the difference in prices is not much but, the functioning are totally different to sliding,

14k is much oo brother although i kind of get what you saying, if I am faced with 20 windows that's 280k in saving if i go sliding over casement, however i do not believe 280k is really that much in the grand scheme of things, traditional sliding windows are now considered "old school" in a way

Adedward:
the 4ft by 4ft sliding with this burglaries will cost u, #32k sir with sliding nets sir,

Thanks a lot, a cost saving of 14k per window is nothing to be sniffed at if you looking at 20+ windows

Adedward:
depends the sizes sir, but 4ft by 4ft like this one I sent go for # 46k now sir, with nets

Woah, inflation is killing us in this country

I have always wondered and permit me to pick your brain on this, what is the cost savings on sliding windows in lieu of casement windows, lets use the 4ft by 4ft you posted, if i decided to go sliding on that with burglary what would it cost?

Tnx in advance

amdman:
Welcome to Nigeria!

Mercedes Benz B200

Good day

Please how much will land this (rust free)

zuraking:
thank you. At least Your own practical is on the site.

GREEDY engineers and builders with ridiculous price for houses cos they will do one yeye drawing that won't even resemble it after completion.

No need for name calling bro....his estimate were based on certain parameters. It was on the high side but then everything depends taste.

Adebhayor:
Great Architect in the house, kindly help me check out this plan and point out the errors before laying my foundation please. Thanks

Please just an enquiry, what is your land size

SOCHDESIGNS:
Designed for a space of 38x60ft with 6m(20ft) left lengthwise out of the 60ft.

Please Can this fit into a half plot (225 sq meters) and still leave parking space?

Love your designs, unique

Some of you really need to grow up

No one got to chose, White, Black, Asian, African, Igbo, Hausa, Yoruba, Tiv etcetera none of us got to chose. I have always found discrimination absurd.

Most of you are determined to kill a very educative thread for reasons best known to you and yes that includes those discussing a new forum.

This has gone on long enough, back to why we are all here.

Takoro13:

Joke of the day

Thought i was the only one who found it both funny and pretentious

Paleegee:


Good morning everyone, my Name is Temitayo, am Bricklayer( Mason) with good engineering experience both theory and practical Contact for your building construction, renovation ,finishings. Kindly contact on directly on WhatsApp or call me on +2347056666699. Thanks. In God I trust

I believe this has been noted unless your intention is to annoy

[quote author=Jasobry post=95679517][/quote]

This looks nice

Saw the pic of how far you have gone, nice job so far

money121:


No sir

Metcopo woodwrk can work for steptiles design

But longspan can't work for steptiles and metcopo due to the poline spacing

If anybody tried such the roofing leaks
Unless u add more wood to it.. so dat d sheet will lap very well

Thanks this is duly noted

money121:


Uwl sir

Good day bro

Please can an existing long span roofing be replaced with Metcoppo with the same woodwork already in place?

GoodFaith:

300 bags of cements?
Please can we just talk about inside
Are you telling 100 bags of cement for inside?
the 8 rooms is about on the high end 8 x 3= 24 bags

I think he means with the outside and also fence and all

GoodFaith:

Two to three bags of cement for one room 12 x12
two Bricklayers and one service for one room 12 x12

Thanks...i think this is the way to go. Small small make e no break hand

n3xt:


Budget - N2m

I spent N2.3m on almost same building configuration (7 rooms, 2 kitchen, 3 lounge, 10 toilets, gatehouse, gym, fence and other external works)


Make plans for:

300+ bags of cement.
Sand (Big Truck) = 6 - 8 trips
If small trucks, budget 14 trips.
Labour (local labour rate apply)

That's a lot bro, thanks. I think taking it two rooms at a time will help.

n3xt:


This is still very valid too.

That plate you’re talking about is the gusset.

To have a very good understanding of how gussets are used in steel structures, check the popular Onitsha Bridge.

Bro let me pick your brain a little on a question i asked earlier, how much do you think it would cost to plaster an 8 bedroom duplex, or better still how many bags of cement would you consider adequate, trips of sand and the likes. its 8 bedrooms, 2 sitting rooms, 2 kitchens, a store and laundry.

michlins:
Good evening everyone. Hope you all had a great day. I have been asked how I intend to reduce the noise which iron doors are notoriously known for and here is my solution.


So after making the doors and installing on the frame. I will use a special hinges that will allow me to pull the doors from the frame at anytime I desire. I will cut dunlop foam according to the shape of the frame and align it across the whole frame. When you close the door, instead of the iron door to hit the iron frame, it will jam on the foam which will cushion the sound and reduce the noise by at least 70%. Now when you hang it on wall and fill up the frame with cement, it will nearly eliminate the noise down to non-existent level. The said hinges is noiseless and doesn't make creaky sound too.

Attached is the picture of the door which I worked on. The owner no follow for people who likes fancy stuff but he's one person that has eyes for perfect finishing

Nice you finally decided to divulge your method. Still not a fan of metal doors used as interior doors. Having said that we will be needing at least 5 metal doors for exterior doors (single) and two doubles. You will get priority when the time comes as the project is in your backyard. Cheers