ozornet:
The oil that is derived from palm kernel are used for cosmetic product making and other vital industrial purposes. Palm kernel oil extraction business is one of the hidden lucrative and profitable businesses that many people are yet to know much about or anything at at all. Unless you are told of how lucrative this business is by an insider, you will never believe it makes any money let alone making millions. But I can tell you for certainty and for free that palm oil extraction business is a mega millions business. For those desiring to venture into the business without experience, it is advisable to link up with an experienced professional consultant

Do you know that you can make N200,000 and above daily even as a small/medium scale producer? Are you aware that palm kernel oil product is one of the few products you can sell right at the point of production, without necessarily needing to take it to the market or
advertising for buyers? Do you know that most of the time buyers even pay for the products in advance and give you time to buy the raw materials and produce for them?



It can be run in a small, medium and large scale, depending on your financial capacity . You may be wondering but where can one get palm kernel in large quantity? The Southern parts and some areas in the middle belt of Nigeria are palm tree growing zones. It is produced in hundreds of thousands of tones in the Eastern and South Southern parts of Nigeria annually. All you need to do is to go set up your palm kernel oil extraction business around the east/south south or you transport the raw materials, procured from the east or south south at a much cheaper rate, to your desired location and mill.

It is however most profitable when you set it up in an area where you can get Palm Kernel Nuts (PKN) in largest quantity due to transportation costs and other logistics. Ondo, Ekiti, Osun , Edo, Kogi and Benue states are also good at the production of palm kernel nuts too, so you may decide to source it there if you are within the West or middle belt

The Analysis Of Palm Kernel Oil Extraction Business
PKN – Palm Kernel Nut. The is the nut you get when a palm kernel’s hard shell is broken. That’s the nut where the oil we are talking about is extracted from.

PKO – Palm Kernel Oil. This is the actual oil that is being extracted from palm kernel nuts, the actual product or one of the main products we are talking about here.

PKC – Palm Kernel Cake. This is another product that is being derived from the palm kernel extraction process and it makes up good percentage of the palm kernel nuts processing..

According to a reliable statistic, it is believed that in every 25 metric tons of good palm kernel nut one is expected to get 10 metric tons of Palm Kernel Oil (PKO), another 13.5 metric tons of Palm Kernel Cake (PKC) as pure product and about one ton of a minor by-product called sludge oil.. Or from every 2.5 tons of kernel nuts processed, you wiil get one ton of PKO, 1.35 tons of PKC and 0.1 ton of Sludge

Below is how they are sold currently

Palm Kernel Oil sells for N650,000 per ton. The Palm Kernel Cake itself is sold for N60,000 per ton. While the Sludge goes for N160,000 per ton.

The cost of palm kernel nuts is N237,500 per ton. You will require ten tons of kernel nuts to extract four tons of the Oils, 5.4 tons of Cake and 0.4 ton of Sludge.

So if you process ten tons of kernel nuts per day which is the normal capacity of most locally made expellers (oil extractors), the cost of raw materials would be N2,375,000
The PKO produced would be N650,000 multiplied by 4 tons, which would give N2,600,000, the PKC produced would be 5.4 tons which would give N324,000 and the sludge produced would be 0.4 ton whichj would give N64,000.
Total sales revenue therefor equals N2,988,000.
When we subtract the cost of the raw materials from the sales revenue which would be N2,988,000 minus N2,375,000 therefore giving us a gross profit margin of N613,000 per day.

So even if we remove say 50% of this gross margin as other costs and expenses we shall be making a net profit of about N306,500 per day.

A consultant can produce a detailed and comprehensive profit and loss account for any interested person.

In a week, you will be making a whooping sum of N306,500 X 6 = ₦1,839,000



The expeller is made of the electric motor and/or diesel engine, the main axle (articulated vehicle axle like Mark, Styer or Kamaz truck axle) and the crushing chamber. The electric motor and/or diesel engine is the prime mover which propels the expeller mechanism. The axle reduces the speed of the prime mover, adjusts and transfers the speed to the main shaft which rotates inside the basket of the crushing chamber.
. At the back end is the electric motor and at the front end is the cage and bars arrangement. All these are mounted and coupled together on a rectangular main frame solidly supported by three iron blocks. On top of the machine is a hopper through which the palm kernel nuts are fed into the machine

The crushing chamber is the place where the grinding and oil extraction action takes place. The main cage of the chamber is where the crushing activities take place. The main cage is made up of a basket of strong iron bars arranged and woven together to form a cylindrical cage inside which the main shaft rotates This specially designed strong iron bars (normally made from the main springs of an articulated truck vehicle) are laid side by side, and nut spacers in between them. The cage is designed with open slots from where the expelled oil drains out. The bars are very well laid so that there would be no clogging of oil or loss of solids in the main cage.
The extra heavy-duty main expeller shaft in the cage is made from ringed iron bar worms (normally made from the main springs of an articulated truck vehicle), that are assembled sequentially such that the worms snake round the shaft from back end to the tip. The thrust of the pressure worm is taken upon a large ball-thrust bearing which makes for smooth crushing operation and alignmentt.

As the kernel nuts are fed into the expeller through a hopper (funnel) and picked up by the rotating shaft, the nuts are propelled by the spiral ringed worms on the shaft and as it moves the nuts through the tight iron cage, the nuts are crushed and the oil squeezed out from the ground and crushed nuts. The squeezed oil drips out through slits made in the basket bars of the cage while the palm kernel cake whose oil is thoroughly extracted and dried is expelled through the front end of expeller cone point. The oil collects in a through under the expeller cage from where it is channeled into the primary tank of the filter press ready for filtration. The palm kernel cake is then collected into bags measured and packed and ready for sale.

ozornet:
The oil that is derived from palm kernel are used for cosmetic product making and other vital industrial purposes. Palm kernel oil extraction business is one of the hidden lucrative and profitable businesses that many people are yet to know much about or anything at at all. Unless you are told of how lucrative this business is by an insider, you will never believe it makes any money let alone making millions. But I can tell you for certainty and for free that palm oil extraction business is a mega millions business. For those desiring to venture into the business without experience, it is advisable to link up with an experienced professional consultant

Do you know that you can make N200,000 and above daily even as a small/medium scale producer? Are you aware that palm kernel oil product is one of the few products you can sell right at the point of production, without necessarily needing to take it to the market or
advertising for buyers? Do you know that most of the time buyers even pay for the products in advance and give you time to buy the raw materials and produce for them?



It can be run in a small, medium and large scale, depending on your financial capacity . You may be wondering but where can one get palm kernel in large quantity? The Southern parts and some areas in the middle belt of Nigeria are palm tree growing zones. It is produced in hundreds of thousands of tones in the Eastern and South Southern parts of Nigeria annually. All you need to do is to go set up your palm kernel oil extraction business around the east/south south or you transport the raw materials, procured from the east or south south at a much cheaper rate, to your desired location and mill.

It is however most profitable when you set it up in an area where you can get Palm Kernel Nuts (PKN) in largest quantity due to transportation costs and other logistics. Ondo, Ekiti, Osun , Edo, Kogi and Benue states are also good at the production of palm kernel nuts too, so you may decide to source it there if you are within the West or middle belt

The Analysis Of Palm Kernel Oil Extraction Business
PKN – Palm Kernel Nut. The is the nut you get when a palm kernel’s hard shell is broken. That’s the nut where the oil we are talking about is extracted from.

PKO – Palm Kernel Oil. This is the actual oil that is being extracted from palm kernel nuts, the actual product or one of the main products we are talking about here.

PKC – Palm Kernel Cake. This is another product that is being derived from the palm kernel extraction process and it makes up good percentage of the palm kernel nuts processing..

According to a reliable statistic, it is believed that in every 25 metric tons of good palm kernel nut one is expected to get 10 metric tons of Palm Kernel Oil (PKO), another 13.5 metric tons of Palm Kernel Cake (PKC) as pure product and about one ton of a minor by-product called sludge oil.. Or from every 2.5 tons of kernel nuts processed, you wiil get one ton of PKO, 1.35 tons of PKC and 0.1 ton of Sludge

Below is how they are sold currently

Palm Kernel Oil sells for N650,000 per ton. The Palm Kernel Cake itself is sold for N60,000 per ton. While the Sludge goes for N160,000 per ton.

The cost of palm kernel nuts is N237,500 per ton. You will require ten tons of kernel nuts to extract four tons of the Oils, 5.4 tons of Cake and 0.4 ton of Sludge.

So if you process ten tons of kernel nuts per day which is the normal capacity of most locally made expellers (oil extractors), the cost of raw materials would be N2,375,000
The PKO produced would be N650,000 multiplied by 4 tons, which would give N2,600,000, the PKC produced would be 5.4 tons which would give N324,000 and the sludge produced would be 0.4 ton whichj would give N64,000.
Total sales revenue therefor equals N2,988,000.
When we subtract the cost of the raw materials from the sales revenue which would be N2,988,000 minus N2,375,000 therefore giving us a gross profit margin of N613,000 per day.

So even if we remove say 50% of this gross margin as other costs and expenses we shall be making a net profit of about N306,500 per day.

A consultant can produce a detailed and comprehensive profit and loss account for any interested person.

In a week, you will be making a whooping sum of N306,500 X 6 = ₦1,839,000



The expeller is made of the electric motor and/or diesel engine, the main axle (articulated vehicle axle like Mark, Styer or Kamaz truck axle) and the crushing chamber. The electric motor and/or diesel engine is the prime mover which propels the expeller mechanism. The axle reduces the speed of the prime mover, adjusts and transfers the speed to the main shaft which rotates inside the basket of the crushing chamber.
. At the back end is the electric motor and at the front end is the cage and bars arrangement. All these are mounted and coupled together on a rectangular main frame solidly supported by three iron blocks. On top of the machine is a hopper through which the palm kernel nuts are fed into the machine

The crushing chamber is the place where the grinding and oil extraction action takes place. The main cage of the chamber is where the crushing activities take place. The main cage is made up of a basket of strong iron bars arranged and woven together to form a cylindrical cage inside which the main shaft rotates This specially designed strong iron bars (normally made from the main springs of an articulated truck vehicle) are laid side by side, and nut spacers in between them. The cage is designed with open slots from where the expelled oil drains out. The bars are very well laid so that there would be no clogging of oil or loss of solids in the main cage.
The extra heavy-duty main expeller shaft in the cage is made from ringed iron bar worms (normally made from the main springs of an articulated truck vehicle), that are assembled sequentially such that the worms snake round the shaft from back end to the tip. The thrust of the pressure worm is taken upon a large ball-thrust bearing which makes for smooth crushing operation and alignmentt.

As the kernel nuts are fed into the expeller through a hopper (funnel) and picked up by the rotating shaft, the nuts are propelled by the spiral ringed worms on the shaft and as it moves the nuts through the tight iron cage, the nuts are crushed and the oil squeezed out from the ground and crushed nuts. The squeezed oil drips out through slits made in the basket bars of the cage while the palm kernel cake whose oil is thoroughly extracted and dried is expelled through the front end of expeller cone point. The oil collects in a through under the expeller cage from where it is channeled into the primary tank of the filter press ready for filtration. The palm kernel cake is then collected into bags measured and packed and ready for sale.

truthisgood:


Hello truthisgood, you can contact us on WhatsApp/call No 08181926534 or 08037788438



Your blessed ,I can say you did a wonderful break down on the processing of PKO business.I am interested in it so I don't know if you are connected to the practical part of it,if yes I would like to have your contact for other enlightenment.Thanks

bassey25:
Great work and weldon's for the great work you are doing. May I ask what's is the cost of setting up a 10tons production capacity .

annjuliet:
Are you still buying palm kernels
We are wholesale suppliers