kendy22:
I hail my ppl here,plz I need ur help,recently I traveled wit a fwnd Dat drives a corolla 06 le,we both were using AC at the speed of 120km,the guy zoomed off omo I just vex say Mak I follow am,my car no gree move wella I press tire no way,so my qustn is, is my car faulty or that's how it shld be.mind u mine is 05 sport. Plz I need ur answers plz

kendy22:
I hail my ppl here,plz I need ur help,recently I traveled wit a fwnd Dat drives a corolla 06 le,we both were using AC at the speed of 120km,the guy zoomed off omo I just vex say Mak I follow am,my car no gree move wella I press tire no way,so my qustn is, is my car faulty or that's how it shld be.mind u mine is 05 sport. Plz I need ur answers plz

kendy22:
Yea my check light is on,did a scan and saw p0420,got to knw it's a catalyst somtin.I Don chng am stil same tin,d car is just sluggish on the road,bro i've used the same corolla le 03,dat car de mad for road,infact this is my third corolla the last 1 b4 dis 1 was an 04 sport too also had same sluggish wahala.whn I bought dis 05 it had a misfire ish I had to drive it frm Asaba to phc bro I must confess it was mad on the road I enjoyed it,so how com whn I chnged d plugs dis sluggish movmnt cam on.plzzzz I need una help

kendy22:
I stay in phc,can anybdy hhelp me?

honsule:
I need to scan my Toyota corolla 2005.Am based in Abuja. who can advice me where to do that?
I observed of recent that if the gear of my car is on DRIVE and am not moving, with my leg on the break, the car tend to vibrate or shake a little, not as smooth as when it is on P or N. what could be wrong?

honsule:
I need to scan my Toyota corolla 2005.Am based in Abuja. who can advice me where to do that?
I observed of recent that if the gear of my car is on DRIVE and am not moving, with my leg on the break, the car tend to vibrate or shake a little, not as smooth as when it is on P or N. what could be wrong?

honsule:
I need to scan my Toyota corolla 2005.Am based in Abuja. who can advice me where to do that?
I observed of recent that if the gear of my car is on DRIVE and am not moving, with my leg on the break, the car tend to vibrate or shake a little, not as smooth as when it is on P or N. what could be wrong?

chiebube1:

Call me for a car scan in Abuja. 09099447385

Specialist900:
aside the vibration is your check engine light on?

tripoli007:


Most likely it should be ur Engine seat

honsule:


It is check o.what does that car CHECK LIGHT means? always ON CHECK

To me when the car is on P or N it is just smooth, i also assume that D should be the same. it doesnt vibrate much, just the side door(a little shaking). Funny enough, when i put ON the AC the car wont even vibrate'/shake, you wont notice anything, just like when it is on P.

honsule:


just last month, the mechanic made me to buy the Engine seating. so, i dont think it is the Engine seat.

tripoli007:


Well I drive a Toyota corolla 04 LE,been using the car for 2yrs and 6months and I have experienced this same fault u talking abt,I guess the engine seats is either 3 or 4 .. Did you change all the engine seats .. You can just take the car to a good mechanic ,separate from the mechanic you use for him to inspect .. Corolla is a really sweet ride

Specialist900:
it means there is a problem somewhere. you need to scan the car to know what's wrong.

honsule:


A friend did the scanning of my car today.But i dont understand the Trouble code brouhaha:
P0010
P0328
P0441

Specialist900:
lemme call solution for you


kingreign, gazzuzz make una come o.

honsule:


thanks. i need that solution and recommendation on who i should meet

honsule:


A friend did the scanning of my car today.But i dont understand the Trouble code brouhaha:
P0010
P0328
P0441

P0010 TOYOTA - Camshaft Position 'A' Actuator Circuit Bank 1 Repair Importance Level: 3/3 Repair Difficulty Level: 3/3  Possible causes - Dirty Oil - Variable Valve Timing (VVT) circuit is open or shorted - Oil Control Valve (OCV) circuit is open or shorted - Faulty variable valve timing (VVT) - Faulty oil control valve (OCV) - Damaged ECM What does this mean? Tech notes If the engine oil is clean and the VVT and OCV circuits are OK, replaced the VVT to resolve the problem. What does this mean? When is the code detected? After the ECM sends the target duty cycle signal to the OCV, the ECM monitors the OCV current to establish an actual duty cycle. The ECM determines the existence of a malfunction and sets the DTC when the actual duty cycle ratio varies from the target duty cycle ratio. Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light) - Lack/Loss of power - Engine rough idle

Read more at: http://www.engine-codes.com/p0010_toyota.html




P0328 Knock Sensor Circuit High Input OBD-II Trouble Code Technical Description Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor) What does that mean? Knock sensors are used to detect engine pre-detonation (engine knock or ping). The knock sensor (KS) is usually a two wire sensor. A 5 volt reference is supplied to the sensor and there is a signal return from the knock sensor to the PCM (powertrain control module).

Read more at: http://www.obd-codes.com/p0328
Copyright OBD-Codes.com


P0441 Evaporative Emission Control System Incorrect Purge Flow OBD-II Trouble Code Technical Description Evaporative Emission Control System Incorrect Purge Flow What does that mean? This indicates that a part of the EVAP control system is no longer functioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines, carbon canister, purge valve, and other hoses. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine. EVAP emission canister purge is controlled by a valve which allows engine vacuum to pull stored fuel vapors from fuel tank into the engine to be burned, rather than be vented to atmosphere. A vacuum switch is used to detect when flow exists. If the PCM commands purge and sees that the switch is closed (indicating no detected purge flow) P0441 is set. Symptoms Likely, no symptoms will be discernible to the driver, other than the illuminated Check Engine Light.

Read more at: http://www.obd-codes.com/p0441
Copyright OBD-Codes.com

tripoli007:


Well I drive a Toyota corolla 04 LE,been using the car for 2yrs and 6months and I have experienced this same fault u talking abt,I guess the engine seats is either 3 or 4 .. Did you change all the engine seats .. You can just take the car to a good mechanic ,separate from the mechanic you use for him to inspect .. Corolla is a really sweet ride

honsule:


I took it to a separate mechanic today. and he told me it is the engine seat. the front and back, that the moment i change it, the car wont vibrate when it is on Drive the way it is doing now. that the belgium of both is 11k. went back to my mechanic, and he told me, i should forgot about it, that it is not the engine seating

kingreign:


I thought we had arranged to meet, scan and diagnose this car then effect whatsoever fixes to be made?
You suddenly didn't show up again.

kingreign:

I thought we had arranged to meet, scan and diagnose this car then effect whatsoever fixes to be made?
You suddenly didn't show up again.

honsule:

I took it to a separate mechanic today. and he told me it is the engine seat. the front and back, that the moment i change it, the car wont vibrate when it is on Drive the way it is doing now. that the belgium of both is 11k. went back to my mechanic, and he told me, i should forgot about it, that it is not the engine seating

honsule:


I took it to a separate mechanic today. and he told me it is the engine seat. the front and back, that the moment i change it, the car wont vibrate when it is on Drive the way it is doing now. that the belgium of both is 11k. went back to my mechanic, and he told me, i should forgot about it, that it is not the engine seating

kingreign:


I thought we had arranged to meet, scan and diagnose this car then effect whatsoever fixes to be made?
You suddenly didn't show up again.