naijababe:



Are you sure that is all you need? I can help but the field is question is a complex beast as we are yet to nail the OOIP because the reservoir sand is an injectite and therefore not visible on seismic. Let me know if all you need is production and injection data. I can send you something to work with.

Thanks. I'll also need the properties of the injector and producer too. Like the saturation, water cut, porosity, permeability , re, rw.
I sent a pm.

vickers95:



Thanks. I'll also need the properties of the injector and producer too. Like the saturation, water cut, porosity, permeability , re, rw.
I sent a pm.

Your demands are very unclear. Well don't undergo water flooding but reservoirs does. Wells are only used as injector and producer from a reservoir to be water flooded. Properties like saturation, porosity, permeability, relative permeability to oil and water are all reservoir properties. Water cut is a producer property also reported as basic sediment and water (BS&W) and measured using a spinning centrifuge.
I have a lot of experience on this because my MSc thesis while studying Petroleum Engineering at the Delft University of Technology 5 years ago was on core flooding experiment where I saturated a core with water, injected oil into the core through the imbibition process, then produce the oil in the core first through water flooding (Secondary Oil Recovery). The water flooding operation produced oil with a recovery of roughly 45%. At the end of the water flooding process, I proceeded with injection of Alkaline Surfactant Polymer (Tertiary Oil Recovery Process) into the core to sweep out most of the trapped oil in the core, with an eventual total oil recovery of around 90% or more depending on the alkaline concentration in the ASP solution.
You need to understand the whole process before you can understand what to do. I had to determine the permeability myself through transducers installed at both end of the core for measurement of the pressure drop during injection. The K can be calculated from Darcy's law.
I work as a Well Engineer(Drilling, Completion and Workover) though because I love its practicality.

vickers95:



Thanks. I'll also need the properties of the injector and producer too. Like the saturation, water cut, porosity, permeability , re, rw.
I sent a pm.

Alright. I will be in touch via email

2good:


Your demands are very unclear. Well don't undergo water flooding but reservoirs does. Wells are only used as injector and producer from a reservoir to be water flooded. Properties like saturation, porosity, permeability, relative permeability to oil and water are all reservoir properties. Water cut is a producer property also reported as basic sediment and water (BS&W) and measured using a spinning centrifuge.
I have a lot of experience on this because my MSc thesis while studying Petroleum Engineering at the Delft University of Technology 5 years ago was on core flooding experiment where I saturated a core with water, injected oil into the core through the imbibition process, then produce the oil in the core first through water flooding (Secondary Oil Recovery). The water flooding operation produced oil with a recovery of roughly 45%. At the end of the water flooding process, I proceeded with injection of Alkaline Surfactant Polymer (Tertiary Oil Recovery Process) into the core to sweep out most of the trapped oil in the core, with an eventual total oil recovery of around 90% or more depending on the alkaline concentration in the ASP solution.
You need to understand the whole process before you can understand what to do. I had to determine the permeability myself through transducers installed at both end of the core for measurement of the pressure drop during injection. The K can be calculated from Darcy's law.
I work as a Well Engineer(Drilling, Completion and Workover) though because I love its practicality.

Easy tiger He is probably doing a reservoir simulation project, when you have no prior experience in these things it is very easy to get things mixed up. He is probably working with some sort of simulator and needs to create a bunch of scenarios with a model.

Anyway, I will talk to him more outside of here and see what help/guidance I can provide.

naijababe:


Alright. I will be in touch via email

Abeg can i also send a PM?

jaybee3:


Abeg can i also send a PM?

SMH!!!

naijababe:


SMH!!!

jaybee3:

Ogbeni carry yourself comot for here make I see road jo

naijababe:


Ogbeni carry yourself comot for here make I see road jo

I'm also an engineer now... Haba...
Why una wan chop all these Oil money alone?

jaybee3:


I'm also an engineer now... Haba...
Why una wan chop all these Oil money alone?

Which oyel money again? Dem don chop that one finish, me dey find the next global cake now ni

naijababe:


Which oyel money again? Dem don chop that one finish, me dey find the next global cake now ni

What's important to you, money or career?

IF money is important then try contracting (BA) as that's the In thing

I will be cautious in using trend to determine the next a long term career change. At the end of the day though, financial sector isn't recession proof as well as questionable longer term prospect with the advent of AI and its core application

jaybee3:


What's important to you, money or career?

IF money is important then try contracting (BA) as that's the In thing

I will be cautious in using trend to determine the next a long term career change. At the end of the day though, financial sector isn't recession proof as well as questionable longer term prospect with the advent of AI and its core application

The financial sector is often the first casualty of a recession but I reckon I can probably use the skills in other ways aside from working for a bank, investment/asset management entities.

As for career and family, both are important within reason o, I have no real interest in some high flying job that will take me away from home for weeks. To be honest, I am at a point where I just want to go to work earn enough to live decently. I have had BA peddled to me by a few people but given the ease of getting a certificate and it is the go to for Jack and Jill, I am quite wary. Decisions, decisions, decisions!

naijababe:


The financial sector is often the first casualty of a recession but I reckon I can probably use the skills in other ways aside from working for a bank, investment/asset management entities.

As for career and family, both are important within reason o, I have no real interest in some high flying job that will take me away from home for weeks. To be honest, I am at a point where I just want to go to work earn enough to live decently. I have had BA peddled to me by a few people but given the ease of getting a certificate and it is the go to for Jack and Jill, I am quite wary. Decisions, decisions, decisions!

I'm not so sure how transferable specific skills such as financial planning will be in the longer scheme of things but yeah some skills can be carried forward

I'm sure you know BA is diverse and almost certainly peculiar to each industry. You already have unique knowledge of the oil industry so why can't you apply it to all industries that has something to do with commodity?

I wouldn't pay too much attention to Naijas that makes it look easy. BA ain't for the faint-hearted. You have to be knowledgeable to proffer solutions for business or process improvement

jaybee3:


I'm not so sure how transferable specific skills such as financial planning will be in the longer scheme of things but yeah some skills can be carried forward

I'm sure you know BA is diverse and almost certainly peculiar to each industry. You already have unique knowledge of the oil industry so why can't you apply it to all industries that has something to do with commodity?

I wouldn't pay too much attention to Naijas that makes it look easy. BA ain't for the faint-hearted. You have to be knowledgeable to proffer solutions for business or process improvement

I am going to call you tonight, make we discuss abeg. A contract would suit me just fine, I have no real interest in any rat race career progression. I want something that will give me time to do all the other stuff I am doing on the side abeg.

Can you recommend any providers with quality training, I dont want any of these 'abe ile' trainers o.

naijababe:


I am going to call you tonight, make we discuss abeg. A contract would suit me just fine, I have no real interest in any rate race career progression. I want something that will give me time to do all the other stuff I am doing on the side abeg.

Can you recommend any providers with quality training, I dont want any of these 'abe ile' trainers o.

The training links i have are sort of london based but i know you have the required skills to succeed as a BA

It's the power of the CV

We go find time to yarn

jaybee3:


The training links i have are sort of london based but i know you have the required skills to succeed as a BA

It's the power of the CV

We go find time to yarn

Ehn! I will come to London now, how long will it take? A week, longer ? Which time you dey find? I will call you tonight, this Muhammad is coming to your mountain

naijababe:


Ehn! I will come to London now, how long will it take? A week, longer ? Which time you dey find? I will call you tonight, this Muhammad is coming to your mountain

On a flip side though, how about Nebosh so you can work in qatar or them gulf region

My madam assures me you could easily earn 10 gees per month without tax

She has been in doha since Jan una background similar kinda

jaybee3:


On a flip side though, how about Nebosh so you can work in qatar or them gulf region

My madam assures me you could easily earn 10 gees per month without tax

She has been in doha since Jan una background similar kinda

Oya o. I just want chop some more money for like another 5 years come face other things. Same NEBOSH as in HSE?

naijababe:


Oya o. I just want chop some more money for like another 5 years come face other things. Same NEBOSH as in HSE?

Same health and safety ooo

I applied last through Amaiden Energy

yungreezy:
hello, how did u apply for please and what agents are u talking about? Also, what opportunities are there for Information technology graduates.

What is your area of profession?

scholarT:


nope they didn't ask , they just asked if I was flexible to work anywhere in Nigeria and I said yes

naijababe:

Alright. I will be in touch via email

Thanks for your help so far. Please reply the new mail when you see it.

pls i nid an entrylevel office job,any how,anytin no matter hw little, am ready to work pls, am based n ph.tnxx.09031550795

I studied Mechanical engineering from FUTO. I also did electro-mechanical engineering (HVAC systems etc). I am a Pipe Fitter and have my trade Test Class 2 certificate. I am in need of an engineering job in PortHarcourt or elsewhere. My location is PortHarcourt. Please assist, Thanks.

Call/watsapp 08067880681,

Email: Iwuchukwuorji@yahoo.com

aaustin:
What is your area of profession?

IT

I need an Employment in an oil and gas Company or a Manufacturing Company. I have experience in Secretarial duties. I Reside in Port Harcourt.

Email: Nefertiti257@gmail.com

SOLICITING FOR AN INTERN PLACEMENT IN THE OIL AND GAS FIELD
Good day all,

Happy New Year to everyone in the house, please am seeking for an intern placement anywhere related to the oil and gas industry as i am a petroleum engineer by degree and would want to boost my on field expertise in my profession.
Please am soliciting with everyone and anyone with such useful information the above subject matter to contact me.

I am willing and ready to work without been paid, as my earnest desire is in acquiring the relevant skills and techniques been practiced in the industry.

Thanks for your concern

Pls can somebody help me? Does Total E & P pay their staff a daily rate? And what project is their DW? What does it mean when they say allowances will be determined by the project? How many days leave does Total E & P Nigeria allow for leave? This is urgent please.

Thank you

Good day everybody....

I'm Nnamdi and I graduated from Fed poly Nekede, studied Estate Management and I also have a professional certification in project management, i have various working experience and skills. Please I'd love a job in the oil and gas sector or any reputable company but the money isn't my drive actually, I can even work as an intern if need be. Thanks.

[quote author=Bowlexzy post=57256338][/quote]
Hello, my name is kola and I'm a graduate from Obafemi Awolowo university, ile-ife. I'm a chemical engineer and I will Love to build a career with Total Nigeria. Here is my number for further discussion 08135644148.Thank you sir/ma.