| How to Use ups as inverter by MT19: 3:20pm On Jan 03, 2020 |
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 
|
| Re: How to Use ups as inverter by MT19: 10:26am On Jan 05, 2020 |
MT19:
We are offering a promo of a complete package inverter which comes with free installation.
It is an opportunity for every family to have an inverter to overcome unstable power supply challenge.
Don't miss this great opportunity
Kindly check the flier Below for the packages.
For more Inquiry call/WhatsApp 0,8,1,8,0,7,2,9,6,1,2 Promo is on |
| Re: How to Use ups as inverter by MT19: 12:45pm On Feb 01, 2020 |
MT19:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 |
| Re: How to Use ups as inverter by MT19: 8:29am On Feb 03, 2020 |
MT19:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Promo is on |
| Re: How to Use ups as inverter by MT19: 8:56am On Feb 03, 2020 |
MT19:
Promo is on Promo is on |
| Re: How to Use ups as inverter by MT19: 1:18pm On Feb 05, 2020 |
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
Below are the calculations .your comments, contributions and suggestions are welcomed.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd
Providing you quality services at all time
Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system
Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 |
| Re: How to Use ups as inverter by MT19: 6:40am On Feb 06, 2020 |
MT19:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Tonytech services |
| Re: How to Use ups as inverter by MT19: 8:55am On Feb 07, 2020 |
MT19:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 |
| Re: How to Use ups as inverter by MT19: 7:50am On Feb 15, 2020 |
MT19:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Your reliable power solution |
| Re: How to Use ups as inverter by yomiak1(m): 5:06pm On Feb 26, 2020 |
MT19:
Your reliable power solution Check this out guys 
|
| Re: How to Use ups as inverter by MT19: 6:38am On Mar 21, 2020 |
MT19:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Call us |
| Re: How to Use ups as inverter by MT19: 11:16am On Apr 03, 2020 |
MT19:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Try us today |
| Re: How to Use ups as inverter by MT19: 1:09pm On Apr 08, 2020 |
MT19:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Stay safe |
| Re: How to Use ups as inverter by MT19: 10:20am On Jun 18, 2020 |
MT19:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Chose renewable energy today |
| Re: How to Use ups as inverter by MT19: 8:16am On Jun 28, 2020 |
MT19:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.
Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.
UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage
How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing
Step2
Locate the internal connected battery(ies) and disconnect it
Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used
Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly
Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well
Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply
Step 8
Connect your load at the back of your ups to power your load in the house
Below is a picture of mine. It is what i am using for 2yrs as my inverter
This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)
based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w
Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services
Providing you quality services at all time
Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7 Call us today 1 Like |
