It is not an easy job for users to get clear enough dot targeting in distance. However, once users are giving up the use of sticker, laser pointer, or others, it would be the most moment for users to make good use of a Berlinlasers green dot laser alignment. It is keeping constant green reference dot targeting from laser beam aperture part. Instead of simple equipment with alkaline battery, only if this green laser module is equipped with external DC input power supply, it is just keeping constant and highly accurate green reference dot targeting on required working surfaces.
This green dot laser alignment gets good use of qualified glass coated lens. Once dot targeting is processed at various work distance, a correct power made green laser module is just making the clearest dot instruction for close distance, long distance, high lighting working occasions etc. Users can also make quite easy adjustment of laser beam, high intensity green laser beam has just converted into a small size green dot in use. When green laser module gets proper adjustment of dot targeting direction, it makes no mistake measurement easily.
http://www.berlinlasers.com/532nm-green-dot-projecting-laser-alignment

How do you like to do to make super accurate and rapid dot alignment on various targeting surfaces? It is not a hard work until users are getting the chance to make use of Berlinlasers red dot laser alignment. It is a direct diode emission dot measuring tool, within its wide range output power of 5mW to 100mW, it is not only workable for various work distances, but also able to be used with improving laser beam stability under formal dot aligning operations.
This red dot laser alignment is looking the same as a red laser pointer. It is giving up the use of simple alkaline battery, but using external DC input power supply. Owing to its good design of APC driving circuit board and metal heat sink cooling inside its metal housing tube, this red laser module is always getting quite nice thermal conductivity, and then making sure of the most stable dot alignment in long term use. Users should just make proper adjustment of laser beam focus and proper dot targeting direction adjust, a correct output power made red laser alignment gets wonderful measurement for laser marking, laser engraving, military targeting and others etc.

If there is not quite nice solution for users to make accurate enough dot alignment immediately, nothing would be helpful at all until users are getting the chance to make use of a high brightness red laser diode module. It is a very easy operated dot alignment tool, owing to its wide output power range from 5mW to 100mW, the real dot alignment work is not only workable for formal close distance, but also generating clear and quick dot instruction for long distance and high lighting as well.
This red laser diode module gets selected aircraft used aluminum alloy housing material, equipped with copper raw material made laser diode core part, it is just achieving super nice thermal conductivity, and then assuring the most stable red dot targeting in long term use. This dot laser alignment tool is also being used as an accessory part, after easy installation on laser marking machine, laser engraving machine, drilling system, it will make the clearest dot instruction all the time.
http://www.berlinlasers.com/635nm-red-laser-diode-module

How would you like to do to get a time saving line alignment in distance? If there is no chance for users to make use of a high brightness Berlinlasers green laser line generator, nothing would be helpful at all. A manual line drawing tool is only workable for quite close distance and also taking a lot of time consumption. The real use of green laser module is getting free choices of optic lens degree within 10 degree to 110 degree, and then generating highly straight and fine green reference line on all working surfaces effectively.
This green laser line generator gets wide output power range from 5mW to 100mW. Besides operation under sunlight, it is easily getting quite clear and accurate line alignment from formal hand reaching until maximum work distance of 25 meters. This green laser module is not adjustable focus, however, users can also make free adjustment of laser line targeting direction and line thickness, and then achieving the clearest line instruction for laser cutting, laser car wheel alignment, military targeting and sand mill processing works etc.
http://www.berlinlasers.com/532nm-separate-crystal-lens-green-laser-line-generator

If there is not a clear idea for users to make an immediate and quick dot measuring result on different targeting surface, it would be the most wonderful choice for user to make good use of a green dot laser alignment. When highly bright green laser dot is pointed from 532nm green DPSS laser part, it is just showing clearly with a small and bright green dot in distance. After proper adjustment of laser beam focus, this green laser module is allowing operation within maximum work distance of 25 meters.
This green dot laser alignment gets nice equipment with an external DC input power supply. Equipped with APC, ACC driving circuit board, even though it is workable with quite high power, however, this green laser module is always keeping constant and stable green reference dot targeting from laser beam aperture part. It is accepting dot aligning within maximum daily operating time of 8 to 10 hours, and then power off for laser module tube cooling down. Only if users are selecting a correct power made green laser module, it is just making no mistake and high speed dot alignment result precisely.
http://www.berlinlasers.com/532nm-green-dot-projecting-laser-alignment

If users are getting special need of super accurate cross line targeting at quite long work distance, the use of Berlinlasers green cross laser alignment just brings users the most wonderful experience in any type of industrial precise device manufacturing work fields. This green laser module is a quite advanced cross line aligning tool, only according to quite easy installation and adjustment of cross line targeting direction, it gets clear and high speed cross line measurement for laser alignment for screen printing system, military targeting, laser medical treatment etc.
This green cross laser alignment gets good use of qualified glass coated lens, together with good use of advanced 532nm green DPSSS laser tech, it is just assuring quite high laser beam transmittance, and excellent green vertical and horizontal laser lines targeting with accurate 90 degrees. According to its compact structure design with 16mm and 26mm and durable structure, the real green cross line alignment can bear quite harsh occasion and wide range operating temperature. A correct output power made green laser alignment just gets no mistake and high speed measurement precisely and accurately.
http://www.berlinlasers.com/532nm-green-cross-projecting-laser-alignment

If there is a special need of highly accurate line alignment in distance, it would be a super nice solution for users to have a try of Berlinlasers green laser line generator. Owing to its high fineness and high uniform beam distribution from its separate crystal lens, this green laser module is just achieving highly accurate and highly straight green line targeting on any working surfaces. The real laser line alignment is also ensuring easy operation within maximum work distance of 25 meters, and then getting clear line alignment for all industrial and high tech line measuring work fields effectively.
This green laser line generator is not adjustable focus, however, the front laser beam aperture part is freely adjusted, and then obtaining fine enough line alignment as expected. This green laser module is using very durable structure design with aircraft used aluminum alloy, which is obtaining super nice thermal conductivity, and also bearing harsh occasions, such as mechanical shocking, calibration or moving etc. This laser line device is an ideal choice for laser cutting, military targeting, laser car wheel alignment and wooden board milling etc.
http://www.berlinlasers.com/532nm-glass-lens-green-laser-line-generator

How would you like to do to get super accurate line alignment in distance? Until users are getting the chance to make use of green laser line generator, it is just becoming a quite convenient and easy job to obtain required line aligning accuracy as expected. This green laser module is adopting 532nm green DPSS laser tech, owing to its wide output power range of 5mW to 100mW, unless operation under sunlight, a different output power made laser line module is easily obtaining super clear and quick line alignment on all targeting surfaces effectively.
This green laser line generator gets easy use of external DC input power supply, which is keeping constant electric power source supply and also keeping highly reliable and stable line alignment in harsh working occasions, such as strong interference or strong static. This line laser alignment is adopting very small size tube diameter of 16mm and 26mm, after proper installation and adjustment of line targeting direction, it is easily obtaining high level of accuracy line alignment for laser cutting machine, textile garment processing, laser medical treatment device etc.
http://www.berlinlasers.com/532nm-glass-lens-green-laser-line-generator

Not the same as a formally used laser dot aligning tool, Berlinlasers red laser line generator is just being made with focused beam, without adjustable beam focus design. however, according to quite easy screw of laser beam aperture, high intensity red laser beam is just converting into a super fine red reference line, and then obtaining highly accurate and precise line alignment on various targeting surfaces effectively.
This red laser line generator gets quite nice equipment with qualified glass coated lens with wide range lens degree from 10 degree to 110 degree. The desired red laser line is available with different line length from 0.5 meter to 6 meters, and also keeping high level of line straightness and good line fineness. This red laser module is just used as an accessory part of other machine or device, getting super clear line instruction for all kinds of industrial and high tech laser line use fields, including laser cutting, textile garment processing, military targeting, and laser medical treatment device etc.
http://www.berlinlasers.com/650nm-red-laser-line-generator

If users are trying to make line alignment on various targeting surfaces stably, it would be the greatest job for users to have a try of Berlinlasers red laser line generator. Owing to its selectable output power and optic lens degree, it is gaining different line length and line thickness, and then bringing users quite clear and quick line alignment for those of industrial line aligning work fields. Noncontact red laser line targeting is just getting no barrier caused by work distance, height, corner and others etc.
This red laser line generator gets constant electric power source from DC input power supply, which is able to get constant and highly straight red reference line targeting in distance. It is keeping high straightness line alignment, and then making sure of easy and convenient line instruction for laser cutting, textile garment processing, sand mill, image processing system etc. Users can make free installation and adjustment of this red laser module, and then making sure of the clearest line instruction within maximum distance of 25 meters.

If there is not a clear idea for users to get quite accurate and quick cross line alignment in distance, the use of Berlinlasers green cross line laser module would just solve the problem, and then making sure of the clearest cross line generation on all targeting surfaces. Owing to its good use of qualified glass coated lens and advanced thermal emitting system, this green laser module is assuring the most stable cross line alignment in multiple industrial and high tech laser line alignment uses.
This green cross line laser module is workable with an external DC input power supply, which is able to work within wide range output power from 5mW to 100mW. Unless its operation under sunlight, high power green laser module up 50mW to 100mW is also workable for long distance and high lighting working occasions. Owing to its good equipment of APC, ACC driving circuit, this green laser module keeps constant output power supply, and then making sure of the most stable line alignment for laser cutting, military targeting, wooden board, and textile garment processing works etc.
http://www.berlinlasers.com/532nm-green-cross-line-laser-module

If there is a special need of high accuracy dot alignment at quite long work distance, it would be the best choice for users to make good use of Berlinlasers 445nm blue laser diode module. This is a quite high power dot measuring tool, under condition that it is being made with quite nice metal heat sink cooling system and copper made laser diode core part, this metal housing made blue laser module always gets superior nice thermal conductivity, and then assuring the most stable dot alignment in long term use.
Besides its nice cooling system, this blue laser diode module is also getting important design part of APC driving circuit board, which is making great work for users to obtain the most constant blue reference dot targeting in long term use. This high power laser dot alignment is also a very nice and industrial stabilized dot measuring tool. When it is getting proper operation and high attention to laser safety measures, this blue laser module easily obtains the best dot instruction for laser marking, laser displaying, laser show and decoration works etc.
http://www.berlinlasers.com/445nm-blue-laser-diode-module

If there are a lot of users who are looking for high level of accuracy cross line alignment in distance, nothing would be much more helpful for users than the use of high brightness Berlinlasers green cross line laser module. It is good cross line alignment tool, owing to its good use of advanced 532nm green DPSS laser tech and nice thermal emitting system, a correct installed cross line laser is just achieving high level of accuracy cross line alignment constantly.
This green cross line laser module gets easy connect with 3V or 4.2V DC input power supply, which is workable for constant and highly bright two perpendicular green lines generation on desired working surfaces. Although some of cross line alignment is processed under high lighting, however, it should only be selected with quite higher output power up 50mW to 100mW. The operation of green laser module is just used as an accessory part, after quite easy adjustment of laser beam focus and cross line targeting direction, it can easily achieving high level of accuracy alignment for laser alignment for screen printing system, military targeting, laser medical treatment device etc.
http://www.berlinlasers.com/532nm-green-cross-line-laser-module

When dot measuring work is processed with Berlinlasers pro red dot laser alignment, owing to its wide range output power from 5mW to 100mW, it is workable for multiple work distances and lighting occasions. In order to make clear enough dot instruction in distance, users should use this red laser module without sunlight and control real dot aligning distance within 25 meters.
This pro red dot laser alignment gets the best designed metal heat sink cooling system inside its aluminum alloy housing tube, which is getting perfect dual direction thermal control, and then easily obtaining stable enough red laser dot targeting in long term use. This red laser module is very small, which is used as an accessory part, getting nice and convenient installation and adjustment, and them getting the clearest dot instruction for laser marking, drilling system, military targeting etc.

If you are trying to make dot measurement under night vision, it is just the best chance for user to make good use of Berlinlasers 808nm infrared dot laser alignment. It is available with quite longer wavelength than formally used 650nm red laser device, which is generating invisible infrared laser beam in distance. Once it is workable for clear dot alignment, it is just working together with CCD camera, black and white camera, or infrared laser camera, and then forming into clear infrared dot instruction effectively.
808nm infrared dot laser alignment is not a separate part, but always workable as an accessory part. It is also getting different use from those of visible laser devices. This infrared laser module is workable for night vision illumination work fields, bringing users clear infrared laser dot targeting for night hunting, surveillance, intelligence system, military targeting and laser medical treatment device etc. Users should only be cautious enough with powerful infrared laser light and avoid eye exposure, and then getting secured IR dot positioning perfectly.
http://www.berlinlasers.com/808nm-infrared-dot-projecting-laser-alignment

If you are trying to make extremely accurate dot alignment for those of high tech work fields, it would be the most marvelous experience for users to make good use of Berlinlasers green laser diode module. It is not only keeping the clearest dot instruction from 532nm green DPSS laser part, but also getting the smallest size green reference dot from its low laser beam divergence of less than 1mard. After very easy installation and adjustment of laser beam focus, this green laser module makes the most wonderful dot alignment for lab experiment, scientific research, laser medical use and other high tech fields etc.

This green laser diode module is using 3V or 4.2V DC input power supply, which takes no time to make change of battery, but also ensuring the highest speed dot alignment on different working surfaces. In addition, users are using this dot laser alignment tool as an accessory part, which is able to be installed on any device within wide distance of 0.5 meter to 3 meters, and then forming into the clearest dot instruction on any vertical or horizontal surface perfectly.
http://www.berlinlasers.com/520nm-green-laser-diode-module

When I am trying to get clear enough dot alignment under night vision, it is just a quite lucky moment for me to use Berlinlasers 980nm infrared laser diode module. It is getting the use of long wavelength 980nm infrared laser diode as its laser beam emitting source. Owing to its invisible infrared laser beam emission, this infrared laser module is just working as an accessory part of CCD camera, black and white camera or infrared laser camera, and then forming into super clear and quick infrared laser dot alignment easily.
This 980nm infrared laser diode module is very easy to operate and adjust. Owing to its design with 16mm and 26mm diameter tube design, this metal housing made dot laser alignment tool is always easily installed on other device, and getting quick and convenient infrared laser dot targeting for laser medical treatment, night hunting, telescope observation and surveillance etc. Users can make free adjustment of laser beam focus and infrared laser dot targeting direction, this wide output power range made infrared laser alignment gets the most wonderful dot instruction under all night vision work fields perfectly.
http://www.berlinlasers.com/980nm-infrared-laser-diode-module

If there is not a quite nice method for users to get clear enough line alignment in distance, none of manual line drawing tool can be workable as nice as a Berlinlasers green laser line generator. This is a professional line alignment tool, only according to its free selection of optic lens degree from 10 degree to 110 degree, this glass coated lens made green laser module just achieves different line length, and then fulfilling the clearest line instruction for multiple industrial and high tech line aligning use fields marvelously.
Owing to its nice use of metal heat sink cooling system inside its metal housing tube, this green laser line generator gets quite nice thermal conductivity, and also bearing harsh occasion under mechanical shocking, calibration or moving etc. Users can install this green laser module on any other industrial machine or device, and then getting the clearest laser dot instruction on any vertical or horizontal surfaces effectively. Users should also be cautious enough with powerful green laser light and thermal energy, a correct power made green laser module just gets no danger and no mistake line alignment perfectly.
http://www.berlinlasers.com/532nm-glass-lens-green-laser-line-generator

If there is not a quite nice method for users to get clear enough line alignment in distance, none of manual line drawing tool can be workable as nice as a Berlinlasers green laser line generator. This is a professional line alignment tool, only according to its free selection of optic lens degree from 10 degree to 110 degree, this glass coated lens made green laser module just achieves different line length, and then fulfilling the clearest line instruction for multiple industrial and high tech line aligning use fields marvelously.

Owing to its nice use of metal heat sink cooling system inside its metal housing tube, this green laser line generator gets quite nice thermal conductivity, and also bearing harsh occasion under mechanical shocking, calibration or moving etc. Users can install this green laser module on any other industrial machine or device, and then getting the clearest laser dot instruction on any vertical or horizontal surfaces effectively. Users should also be cautious enough with powerful green laser light and thermal energy, a correct power made green laser module just gets no danger and no mistake line alignment perfectly.
http://www.berlinlasers.com/532nm-separate-crystal-lens-green-laser-line-generator

If there is a quite special need of super accurate cross line aligning with long line length, it is just the best chance for users to make good use of Berlinlasers green cross laser alignment. It is an advanced cross line measuring tool, owing to its good use of glass coated lens with different optic lens degree of 10, 15 and 110 degree, this green laser module is just workable with different cross line length and high linear quality two perpendicular green lines generation in distance. Under condition that green laser module is selected with large optic lens degree of 110 degree, it is just able to get the longest line length of 6 meters cross line source at about 2 meters distance.

This green cross laser alignment is a nice accessory part of those of industrial device, which is able to be installed on industrial device, such as heat transfer machine, laser alignment for screen printing system, laser medical treatment device, and others. Owing to its special electric wire design, this green laser module is allowing free installation and adjustment within 0.3 meter to 3 meters, and then achieving high level of accuracy cross line alignment conveniently.
http://www.berlinlasers.com/532nm-green-cross-projecting-laser-alignment

If you are trying to make high level of accuracy line alignment in distance, none of manual line printing tool can be workable at all. It is just the best chance for users to make good use of Berlinlasers blue line laser module. Owing to its direct blue laser beam emission from 445nm blue laser diode and quite nice equipment with metal heat sink cooling system, this high power blue laser module is getting highly stable blue reference line targeting in long term use.
This blue line laser module gets the employment of qualified separate crystal lens. it is keeping even brighter and more visible blue laser beam emission than formal plastic coated lens or glass lens. Available with wide range optic lens degree of 10 degree to 110 degree, blue laser line is available within 0.5 meter to 6 meters. Users can make free choice of output power and optic lens degree, this blue laser module gets the most marvelous line alignment experience for multiple work fields, including laser cutting, military targeting, wood milling etc.
http://www.berlinlasers.com/445nm-50mw-80mw-100mw-blue-line-laser-module

If users are trying to make extremely stable dot aligning in distance, the use of Berlinlasers blue dot laser alignment is just bringing users totally different experience for any type of industrial precise machinery processing work fields. According to its easy use of DC input power supply, it is just keeping constant blue reference dot targeting from laser beam aperture part, and nice thermal emitting in long term use.
This blue dot laser alignment is a high power dot measuring tool, which is getting nice thermal emitting from metal heat sink cooling system and aluminum alloy housing material. it is getting the best thermal conductivity from its metal housing tube. Although this is a high power 445nm blue laser module, however, owing to its important design of APC driving circuit board, it is keeping constant output power and electric current, and maintaining the most reliable blue reference dot targeting in long term use. When users are paying attention to powerful blue laser light and thermal energy, this high power blue laser alignment just gets the most secured dot for multiple machinery processing works effectively.
http://www.berlinlasers.com/blue-dot-laser-alignment

If there is not quite efficient line alignment solution, users should have a try of high brightness Berlinlasers green line laser module. Usually the real laser line alignment work has no need to spend extra time on manual line drawing or line printing. Only if this laser line module is getting connect with DC input power supply with 3V or 4.2V, it is making sure of immediate and high accuracy green reference line targeting on desired working surfaces effectively.
Usually green line laser alignment is working with the lowest time consumption, it is workable within wide output power range from 5mW to 100mW. Inside its module tube, there is enough space reserving as its metal heat sink cooling system and APC driving circuit board. When this laser line generator is workable within 8 to 10 hours per day, it is easily maintaining its stable enough line alignment in long term use. This high efficiency and low labor force input green laser module is the best solution for laser cutting, laser car wheel alignment system, military targeting and others etc.
http://www.berlinlasers.com/532nm-green-line-projecting-laser-alignment

Without worry about dot aligning accuracy, the use of Berlinlasers 515nm green laser diode module is always able to bring users high speed and high accuracy green reference dot targeting on various working surfaces easily and accurately. According to quite easy screw of laser beam aperture part, green laser beam is temporarily focused, and then forming into a small diameter green dot immediately.
Once 515nm green laser module is available with high power 50mW, it should be equipped with higher operating voltage of 8.4V DC input power supply until getting bright enough green reference dot immediately. It is a direct diode emission dot laser alignment tool, equipped with nice metal heat sink cooling system and APC driving circuit board inside its metal housing tube, this green laser module is easily getting stable enough green reference dot targeting in long term use. Only if this green laser dot alignment is properly adjusted with dot targeting direction and laser beam focus, it is making no mistake dot alignment perfectly.
http://www.berlinlasers.com/515nm-green-laser-diode-module

If there is quite strict requirement of dot aligning accuracy, users should not give up Berlinlasers blue laser diode module. it is keeping direct blue laser beam and blue dot targeting from its 445nm blue laser diode. Equipped with import laser diode tech, this blue laser module is just effective enough to get at least 40% improvement of laser beam stability. Users can make quite easy installation of this dot laser on desired working surface, and then getting easy dot instruction for special fields, including decoration, military targeting, laser show and laser displaying work etc.

This blue laser diode module is using very compact design, available with aluminum alloy housing and metal heat sink cooling system, it is able to work with constant blue reference dot targeting from laser beam aperture part. In addition, according to quite easy screw of laser beam aperture part, high intensity and high power laser light is temporarily focused, and then forming into the clearest blue dot in distance. Users can install this laser dot alignment tool on correct place, and pay special attention to powerful laser light, and then making sure of secured dot alignment effectively.
http://www.berlinlasers.com/445nm-blue-laser-diode-module

If you want to make super marvelous cross line targeting on various working surfaces, the use of Berlinlasers green cross laser alignment is just the best choice. After its easy connect with an external DC input power supply with correct operating voltage of 3V or 4.2V, this green laser module is just workable with constant green vertical and horizontal laser lines with accurate 90 degrees. Only according to easy choice of output power and optic lens degree, green laser alignment makes high speed and no mistake cross line targeting effectively.
Owing to the good equipment of durable aircraft used aluminum alloy housing, metal heat sink cooling system and APC driving circuit board, green cross laser alignment is keeping constant cross line source generation in long term use. It is maintaining stable enough cross line source generation under super rapid tube temperature increasing. Under condition that this green laser module is workable within 8 to 10 hours per day, it is making sure of the clearest cross line generation for laser alignment for screen printing system, heat transfer machine, laser medical treatment device etc.

If users are trying to get super clear dot alignment on multiple working surfaces, it would be the most marvelous experience for users to make good use of Berlinlasers red dot laser alignment. It is using import 650nm red laser diode as its laser beam emitting source, owing to its mature laser diode tech and mass production, this red laser alignment is not only able to work with highly stable red reference dot targeting, but also available with low production cost.
This red dot laser alignment is just a very economic solution for those of industrial precise machinery processing work fields. It is working immediately after its easy connect with DC input power supply. No matter it is being made with 16mm or 26mm diameter tube diameter, it is getting the best thermal emitting from its metal heat sink cooling system and aluminum alloy housing. Users can use it freely for multiple work fields, including laser marking machine, drilling system, military targeting, laser engraving machine etc.
http://www.berlinlasers.com/economy-red-dot-projecting-laser-alignment

If you are not able to work with extremely accurate line alignment without quite short time, anyway, it is just the good chance for users to make good use of Berlinlasers green line laser module. It is keeping highly straight and high linear quality green reference line targeting from laser beam aperture part. Users should only make easy installation of green laser module on desired machine or instrument, and then getting the clearest line instruction on any vertical or horizontal surface effectively.
Green line laser module gets selectable optic lens degree from 10 degree to 110 degree from glass coated lens. When it is properly selected with its output power and optic lens degree, it is obtaining the clearest line instruction on any vertical or horizontal surface effectively. Green line targeting is workable for wide range distance of 25 meters. Within wide range line length from 0.5 meter to 6 meters, a correct power and lens degree made green laser module is just making sure of the best line alignment for laser cutting machine, laser car wheel alignment system, wood milling and sand mill etc.
http://www.berlinlasers.com/532nm-green-line-laser-module

How would you like to do to get clear enough line targeting on various targeting surfaces? Anyway, if you are getting the chance to use Berlinlasers pro red line laser alignment, it is just generating a clearly visible red reference line with high fineness and high brightness. Owing to its good use of 635nm red laser diode, it is not only available with at least 5 times brighter laser light emission than 650nm red laser module device, but also assuring the best laser light quality in long term use.
Pro red line laser alignment keeps direct diode emission and good equipped metal heat sink cooling system, which is easily assuring stable enough line targeting in long term use. Users can also make easy installation of this laser module device on those of industrial machine or device, and then obtaining the clearest line instruction on any vertical or horizontal surface. According to free choice of output power from 5mW to 100mW, red laser alignment keeps the clearest line instruction for multiple work fields effectively.
http://www.berlinlasers.com/pro-red-line-projecting-laser-alignment

If there is not a good idea for users to make super accurate cross line immediately, nothing would be much more effective than the use of Berlinlasers green cross laser alignment. It is using high quality glass coated lens with different optic lens degree of 10, 15 and 110 degree, which is easily obtaining highly accurate 90 degrees two perpendicular green laser lines on various working surfaces. Owing to its good use of 532nm green DPSS laser tech, unless its use under sunlight, users are only need to make free choice of output power and optic lens degree, green laser alignment gets accurate cross line measurement precisely and accurately.
This green cross laser alignment gets the best use of qualified metal heat sink cooling system and APC driving circuit board, it is just keeping extremely stable cross line source generation in long term use. It is workable within long term use. However, this green laser module is only accepting operation within 8 to 10 hours a day, and then cooling down. It will make great work to reduce laser diode and electric driving circuit board burning out or damage. Users can install this green laser alignment on different machine or device, getting ideal measurement for all industrial and high tech work fields effectively.
http://www.berlinlasers.com/532nm-green-cross-projecting-laser-alignment

If users are getting special need of super accurate dot targeting under night vision illumination, it would be the most wonderful work for users to make good use of Berlinlasers 808nm infrared laser diode module. It is employing 808nm infrared laser diode as its laser beam emitting source, which is much longer than formally used red laser device. Its laser beam is not visible to human eyes, only if this infrared laser module is workable with special night vision device, such as CCD camera, black and white camera or infrared laser camera, it is just converting high intensity infrared laser beam into a clearly visible infrared laser dot on different working surfaces.
This 808nm infrared laser diode module is always workable as an accessory part of other device. Owing to its quite long wavelength of 808nm, it is getting different applications for military targeting, surveillance, intelligence system and laser medical treatment devices etc. This infrared laser module is available with wide range output power of 5mW to 400mW, users can never capture any infrared laser light. Only if users are paying attention to powerful IR laser light and avoid eye exposure, infrared laser module gets high accuracy IR dot alignment clearly and rapidly.
http://www.berlinlasers.com/808nm-infrared-laser-diode-module

If there is not a clear method for users to get super clear dot alignment in distance, it would be the most marvelous experience for users to make good use of high brightness Berlinlasers green dot laser alignment. It is getting the designed best work distance of 3 meters. However, owing to its less than 1mard laser beam divergence, this green laser module is just able to work with super clear and small size green reference dot targeting within the maximum distance of 25 meters.
This green dot laser alignment is allowing free adjustment of laser beam focus, only according to free screw of laser beam aperture part, green laser light is temporarily focused, and then forming into a quite compact green dot in use. Owing to its compact structure made laser tube diameter of 16mm and 26mm, users can install it on any other industrial machine or device, and then achieving the clearest dot instruction on different working surfaces effectively.
http://www.berlinlasers.com/532nm-green-dot-projecting-laser-alignment