₦airaland Forum

Selling!

Deal alert

2 Units Left

...

Crafteck1:
Port probably needs replacing,
Hdd probably bad,
Might be a board component problem

Thanks for the response. Maybe I will have an engineer take a look at it then

Olayibo:
If you've swapped the HDMI cables and not working still.
Get an old model TV, connect the console
Go to settings and disable HDCP.
I assume you use a Samsung TV.
This fixes it.
Or boot to safe mode on your normal TV and disable same HDCP.

Let me know if it works.

Thanks for the response. Yes, my TV is Samsung. So I can disable HDCP on the TV itself right?

My hacked PlayStation 4 console suddenly went blank on the TV screen when I was about to attempt to load the hack. It has been showing no signal on the TV ever since inspite of the fact that the console boots up normally from blue to white.

I have tried a hard reset, tested another HDMI chord and also tried connecting it to another TV to no avail.

Please any suggestions as to what could be wrong and the way out.

Cheers!

dannyville2:
Have you checked your HDMI cable/port?

Thanks for the response. Yes I have. I even had to try another HDMI cable but without success.

My hacked PlayStation 4 console suddenly went blank on the TV screen when I was about to attempt to load the hack. It has been showing no signal on the TV ever since inspite of the fact that the console boots up normally from blue to white.

I have tried a hard reset, tested another HDMI chord and also tried connecting it to another TV to no avail.

Please any suggestions as to what could be wrong and the way out.

Cheers!

Selling out fast!

...

...

Hot deal

...

Deal zone

aladeokin1000:
Good day everyone

Please my Sumec 1800 Spg generator suddenly started giving cranking sounds like iron grinding against iron while working which makes the generator's sound output loud. I changed the oil yesterday but it didn't seem to change anything. I make use of Mobil engine oil 20W-50.

Please what could be wrong with it and how can it fixed?

P.s: It still works perfectly and powers my appliances but the sound it is giving off is a concern to me.

I didn't get a response to this but I thought I should give a feedback anyway just in case it might be useful for someone.

It turned out that the 'bearing' was the culprit according to the technician and not the piston and ring as I envisaged originally. It is working perfectly now

Good day everyone

Please my Sumec 1800 Spg generator suddenly started giving cranking sounds like iron grinding against iron while working which makes the generator's sound output loud. I changed the oil yesterday but it didn't seem to change anything. I make use of Mobil engine oil 20W-50.

Please what could be wrong with it and how can it fixed?

P.s: It still works perfectly and powers my appliances but the sound it is giving off is a concern to me.

Fastest finger. 3 units left

Investment that you can trust
Serene environment

Super estate deal

Deal alert

...The Prestige Villa

...

Hot deal!

Hottest deal!

Hot deal

Citadel of comfort and serenity

The Vintage Court

The Amazon Prime

....

Hot deal

Hot deal