₦airaland Forum

The electric heating oven is a new type of high efficiency and energy saving electric baking oven, which is developed on the basis of our factory's production experience for many years, comparing the similar products at home and abroad, and synthesizing the advantages of each electric baking oven. It has the advantages of energy saving, safety, hygiene, quick heating, low power consumption, stable performance, low operating cost, long service life, easy operation and maintenance, etc. Its baking quality has reached the food hygiene standards and international standards.[url]Peanut /almond crushing machine[/url]http://www.nuts-machine.com/Products/13.html

The roasting oven is divided into two types: ordinary type (carbon steel) and stainless steel type. The ordinary cage is made of stainless steel, the others are made of carbon steel. The stainless steel cage, blades, equipment outer panel, feeding hopper and discharging hopper are made of high quality stainless steel. Ordinary and stainless steel cages can be pierced plate type, users can choose freely according to the material and their own use requirements, we can also design different uses and forms of ovens according to your needs.

The machine is mainly used for baking, drying and reducing moisture content of peanuts, spiced peanuts, melon seeds, almonds, chestnuts, broad beans, beans, nuts and nuts. Electric heating, coal-fired heating and gas heating are adopted in the baking furnace. Rotary cage, heat conduction and heat radiation are adopted to effectively control the heating uniformity and ensure the baking quality. The equipment is equipped with automatic temperature control device: open the time controller to adjust to the material drying, baking time used, baking time after the completion of automatic alarm device. The oven has the advantages of safety, energy saving, hygiene and convenience, fast temperature raising, stable performance, low power consumption, low operating cost, long service life, simple operation and maintenance, and its baking quality has reached the food hygiene standards and international production standards.

The equipment of peanut mechanical baking machine: The furnace is equipped with clutch and temperature control device, adopting the principle of rotary cage, heat conduction and heat radiation, and using coal (which can also be made into gas, fuel or electric heating type) as fuel, the baked object is continuously pushed by spiral blade in the roller during the baking process, forming a continuous rolling, so as to make it rolling. The heating is uniform and the baking quality is guaranteed effectively. Anqiu Xiangshun Machinery Co., Ltd. mainly produces peanut machinery, peanut equipment, peanut baking machine, peanut fryer, peanut peeler, peanut chopper, cleaning machine, almond sheller, cashew nut sheller. It is the earliest enterprise in Shandong Province to develop, design and produce peanut machinery and equipment, and has been leading the development of peanut machinery industry for many years. Grow and become one of the leading enterprises of peanut machinery in Weifang.

The production mechanism carbon has 4 links, crushing, drying, making rods and carbonization. For example, the crushing stage needs to control the moisture content of raw materials, the normal moisture content is less than 40%, the molding stage to ensure the moisture content in 6% - 12% to ensure the quality of charcoal, for the charring furnace charring cycle is normal for dry charring 8 hours, the size of the charring furnace charring speed is also different. Carbonization furnace type:

1, 3 cubic;

2, 6 cubic. The carbonization time of small production is 2 hours shorter than that of large production. The carbonization period of the kiln is usually longer than that of the machine-made carbonization furnace. Carbonization is a very important step in the process of charcoal making. Carbonization furnace is a traditional and newly developed anthracite furnace. During the visit process, customers often encounter problems such as the analysis of the carbonization work of the furnace, the principle on which the furnace works and so on. The process of step by step is for reference.

[url]Carbonization furnace[/url]http://www.charcoal-machines.com/continuous-carbonization-furnace.html step: 1. Drying stage from ignition to furnace temperature slowly rises to 160 degrees Celsius, when the moisture content of the fuel rod mainly depends on external heating and its own fuel rod combustion heat generated by evaporation, the chemical composition of the fuel rod almost unchanged.

1. chimneys are connected in series to concentrate emissions.

This is the simplest way to deal with it, and the cost is low. Previous articles have pictures of our kiln. Chimneys are connected in series. Kiln smoke is introduced into the large chimney through a public flue for centralized discharge. It is necessary to remove the connection between a single flue and a public flue in the early and late stages of carbonization in order to observe the changes of the kiln smoke. It's a good alternative.[url]Sawdust charcoal briquette machine[/url]http://www.charcoal-machines.com/

2. water immersion.

This method is also very simple. A cistern is built beside the kiln and the smoke is introduced into the bottom of the cistern through the blower and pipeline. Due to the high specific heat of the water, the wood tar and wood vinegar liquor of the cistern smoke will be quickly condensed and settled into the water, and a small amount of wood gas will be discharged from the water surface. It should be pointed out that the principle of this method is actually condensation rather than dissolution. Except for a small amount of water lost by evaporation, the rest can be reused. In addition, sediment deposited on the bottom should be removed regularly.

3. condensation recovery.

This is a traditional way. The main equipments are condensing tower and separating tank. If you want to get high purity wood tar and wood vinegar, you need to make a big investment in equipment, the cost of this kind of recovery for the general charcoal plant is obviously too high. If there is no good sales channel, the recycled products can not be realized, after all, these by-products are not as broad as carbon sales. But in any case, recycling represents the direction of the industry, and if the cost of recycling can be reduced, this should be the best solution.

4. two times of combustion.

Wood tar and wood gas, the main components of kiln smoke, are flammable, but they can not be burned because of the poor oxygen environment in the kiln. If a small amount of fuel can be used to ignite the kiln smoke, the degree of pollution will be greatly reduced. In addition, trying to introduce kiln smoke into the hearth of the dryer as a fuel for drying is also a two-pronged solution.

The [url]peanut sheller[/url]http://www.nuts-machine.com/Products/29.html is conveyed by triangular belt. After a period of use, the new belt will gradually elongate and relax due to the effect of tension, so it is necessary to check the tension of each belt and the clearance of each fitting part regularly and adjust it in time.

The soaking time and time of peanut peeling machine. Practice shows that the best soaking sequence and time is: first cold soaking for 30 minutes, then hot soaking for 2-4 minutes. At this time, the peanut is cool inside and hot outside, the whole water is saturated, the skin is expanded by heat, tends to peel off, and is very easy to peel.

Wholeheartedly join hands with friends from all walks of life and seek common development. We will eagerly look forward to your presence and sincerely cooperate with you to create a better future.

Peanut machinery plays an important role in peanut production. With the development of rural economy, farmers'demand for various production and harvesting machinery and its accessories is increasing, and their requirements for various functions are also increasing, and their performance, efficiency and quality requirements are also increasing. How should we choose all kinds of machinery and accessories?

Peanuts machinery http://www.nuts-machine.com/Products/ accessories purchase tips:

First, pay attention to the original factory: consumers will choose the brand when buying agricultural machinery, also in the purchase of agricultural machinery accessories should pay attention to brand. The original parts have the best match with the agricultural machinery in terms of material, size or quality. And most of the original parts have a perfect after-sale service system. It is suggested that consumers should purchase the designated distributors at the designated manufacturers.

(2) Price comparison: Because the fake and inferior products are simple in technology and low in production cost, they tend to attract consumers at lower prices, which is where their temptation lies. Therefore, consumers should understand the market price of some agricultural machinery accessories, if the price is too different from your impression of the price, you can not immediately immerse in the joy of finding a cheap, this time more vigilant. There must be a reason to sell the fittings at a low price, mostly fakes.

Observe packaging: when consumers buy accessories, they should open the package and carefully observe the surface of the accessories. Usually the surface of counterfeit parts is rough, and even after processing can not be cleaned, there are still residual iron chips. Whether they are packaging or accessories themselves are distinctly different from genuine accessories.

In addition, in the purchase of peanut machinery, it must be noted that even small accessories must be invoiced to protect themselves. The purchased parts must have a product qualification certificate, and the inspection personnel's signature and inspection date. We should also check whether there are specific factory information in Chinese on the package.

报错