₦airaland Forum

Here is the concluding partbof the male trouser .to have a fitting and well position trouser there is what I will introduce to as a gator line or seamline and tge seamline/verticalline van be refer to as a linethe cut across the other lune below it .these line are kneel line and ankel line and the is located in within thesquare.

Add me up to make enquiry and if u are interested let go there to learn a professionaldressmaking and have a professional result.

The is a new dimension in professional dressmaking,Learn practical dressmaking wit professional result wit dollarbillzclo workshop and fashion academy for as low as #45k per month Which include ,woman caftan,bubu,Male shirt,e.tc
Enquiry : dollarbillclo workshop and fashion academy @ 9 bamako estate opp omole estate phase 2 ,hotel bus-stop ojodu lagos .
Call. 08185127685 ,08027609353,08030462577

Yes u can and u are most welcome

The next thing is to extend the thigh line ,then u use the whole measurement whic is 25.and make it a single measurment ,25/2=12.5" to extend the thigh measurment .and that will be done according the to the single measurment .

It doesn't matter,the back pattern will be 3" higher than the front pattern

If u are interested type am in

This wil introduce u to 4 cardinal line which indicate the following waistline use to form ur square with 2" for the rope allowance ,crotch,thigh and pocket allowance line

Then u use the 11.5 to form a box ,which I call a square theory method show here,and u can define a square to have all is side equal.

Then we follow this formulae to calculate the waist line measurment to have a single measurment by this step .the avtualwaistline +8/4+1.
The waist is 34"+8/4+1=11.5 is the answer, and that is wT u are using as ur single waist line measuremnet to draft ur pattern .

Now to have it w-waist,L-lenght,TH-thigh,KC-kneel circumfrence,AC-ankle orcuff circumfrence.
For every trouser is made up of 4 pieces. The 2 front pattern and 2back pattern while the back pattern is bigger than the front pattern with 2" different but in the shape of the front pattern .
We start our pattern draft considering the infact that we have our measurment .we start with the waistline measurement ,now what we have have is the whole body trouser measurment , so we do our calculations to have a single measurement , while we will draft our pattern on .
The formular is waist is divided by 4 while every other measurement is divided by 2.

Hello good morning,am starting wit us this morning wit the construction of a tunic trouser. The pattern drafting has to do with the measurment taken from ur clients or whosoever u are sewing for . I will use my measurment as a good example for the class.
Now follow the measurement W-35,L-41,TH-25,kC-19,AC -16.

This is dollarbilzclo workshop and fashion academy @ 9 bamako estate opp omole estate phase 2 ,hotel bus-stop ojodu lagos .
Call. 08185127685 ,08027609353,08030462577
Dollarbillclo workshop and fashion academy a good atmosphere where u can and have a good practical concept in how to construct ur dress pattern ,u can also follow my link on online class thank u https://www.nairaland.com/2530630/let-learn-sewing

Hello class I hope u enjoy the tip of the tutorial so far. The next topic on the plan is the trouser pattern , pls be here on time and don't come late to the class ,asto avoid missing out ,thank u and God bless

,thanks witthin the box we go in by 4" on the S.A sewing allowance line to allow to be to sew on the curve of ur tunic pattern .and above all on the armholelenght we go down 1.5"" to have a (s) ball down to where we have 4" to finally draft the sleeve pattern .thank u and God bless.

Let.say u have other measurement 10" shoetsleeve.and sleevescircumfrene 16,which will be divided by two.
16/2=8, and ur 8 will be measured on the sleeve circumrence.while ur 10" will be measured on the gator line which is the lenght of ur sleeve + 2" hemming allowance as described in the pix above

Yes I need to explain the construction of sleeve pattern is by by using ur shoulder measurement to form a square. E.g. Let say u shoulder measurement is 18 /2=9, so u using 9" to form a square in which all side are equal.
Now please listen,the only area we need to add inches is at the armholelenght area of 2" and for every other line /area we don't need an add of any inches . And everyother measurment should be put in place according to the taking measurment

Here is the construction of the sleeves parttern of ur tunic top

there is the pic of the front pattern of tunic

The next thing to do to complete the front patttern of ur tunic construction is taking the lenght from.the top edge of the neckline,straight to the desire lenght of whosoever u are seewing for and that will be according to the taking measurment. And add 2" hemming allowance to it ,and that's all

Then the next thing to do is extend the chestline by doing the following calculation 40/4=10+1=11 to extend the chestline show in the pic above.

[quote][/quote]Check the diagram and follow the threads ,if u are interested take a seat and type 'am in'

And u get ur armhole by extending ur chestlineb. And control. Ur extension line to get ur curve by 0.8 located at 45 degree outside the square

In within the box we do 3 major things 1.slope the shoulder by 1.5"" ,get the neckline of 2.5"by3" and curve out our armhole ,which will be show in the diagram for u

Well u can use the opportunity to register wit us @ ZHANGGI 9 bamako estate opp omole estate phase 2 ,hotel bus-stop ojodu lagos .
Call 08185127685 ,08027609353,08030462577
Zhanggi workshop and fashion academy a good atmosphere where u can and have a good practical concept in how to construct ur dress pattern ,u can also follow my link on online class thank u https://www.nairaland.com/2530630/let-learn-sewing

Let go there my people , the square box indicate ur shoulder,chestline,armholelenght and front view of individual.and in within the square we slope the shoulder,extend the chestline and measure your neckline .

Well u can use the opportunity to register wit us @ 9 bamako estate opp omole estate phase 2 ,hotel bus-stop ojodu lagos .
Call 08185127685 ,08027609353

An indicated point of shoulder,chest,armhole and the front of every individual ,where the neckline will be

Then use the 9.5" to form a squrae which will have four cardinal

Am sorry ,Kinda busy . Ro where I stopped ,considering the infact that u have ur measurement and then whatever u constructing you follow ur measurement to draft ur pattern .
U start to draft by considering the shoulder measuremnet first and divide it by 2. The shoulder is 17 , and that will be 17/2=8.5 +1=9.5 .

This tunic wear are called madetomeasure to fit the body