₦airaland Forum

YOKI Brand Prep Stations

mproved factory finishes have given new importance to prepping and priming operations. Prep stations help control and improve these operations. A properly designed prep station offers many advantages:

1. Downdraft prep stations surround the vehicle with a curtain of air, which sweeps the sanding dust off the vehicle and into the filters beneath it.

2. Many units feature modular construction, so they can be customized for your specific building and shop layout.

3. Most units re-circulate filtered air, which lowers shop heating costs. Some units have inside/outside dampers for venting fumes outside during priming operations.

Buyers have a choice of pit or semi-downdraft styles. Pit models provide a better curtain of air around the entire vehicle.

Although a prep station will trap most of the dust generated by typical sanding and grinding operations, some collision shop owners also install a dust collection system to provide even better dust control.

If you are going to install several prep stations that will exhaust air to the outside, you should consider installing an air replacement unit to supply clean, heated outside air into your shop. An air replacement unit will correct the negative air condition caused from the prep stations exhausting shop air outside of your building. Proper sizing and location is very important, so talk to your equipment representative to figure out exactly what your shop will need.

We recommend that a lift be available at each station for work on the rocker panels and lower areas of a car.

CAUTION: Your local jurisdiction may not allow you to prime in a prep station. They will require that a prep station which is also being used as a priming station have an explosion-proof motor, an inside/outside damper assembly and possible other modifications to meet local codes. The damper allows the operator to switch from air re-circulation to air exhaust to carry solvent vapors out of your shop. In this case you may need a limited finishing workstation for priming operations. A limited finishing workstation combines an air replacement unit attached to prep plenum/s. The air replacement unit will provide clean, heated outside air while the workstation is in the “exhaust” mode. A limited finishing workstation will provide a positive pressure environment similar to a pressurized spray booth, resulting in cleaner paint work. Some manufacturers offer curing options on their limited finishing workstations to improve productivity. Again, it is very important to know the codes relative to what you want to accomplish when choosing the proper equipment for your shop.



1: During sanding or prep, the overhead plenum re-circulates clean, filtered air to the workstation. During priming, the inside/outside damper vents solvent vapors to the outside.

2: Each fiber in the paint booth-quality air filters is coated with adhesive. This adhesive traps particles as small as 10 microns permanently, even under severe vibration.

3: An adjustable-pitch, non-sparking fan provides 10,000 cubic feet per minute of airflow through the filtering system.

4: A Magnahelic gauge monitors the filtering systems efficiency at all times.

5: The central filtration chamber holds high-density, ultra-fine bag filters. Acoustic insulation reduces shop noise.

6: The first-stage roll filter at floor level collects large particles of overspray and dust.

Cherry YOKI
Sales Manager
Guangzhou YOKI Machinery Manufacturing Co,. LtdSkype:yoki-spraybooth
Moblie: +86 -13066349312
http://www.yoki-spraybooth.com

Cherry from Guangzhou YOKI Machinery Manufacturing Co.,Ltd,we are a professional manufacturer and designer for spray booth,prep station,mixing room,industrial painting line,shower testing room and offer all kinds of products for auto maintenance.

Cherry from Guangzhou YOKI Machinery Manufacturing Co.,Ltd,we are a professional manufacturer and designer for spray booth,prep station,mixing room,industrial painting line,shower testing room and offer all kinds of products for auto maintenance.

AUTO Shop Business Goals

This shop counts on the two side-by-side Global Finishing Solutions downdraft spray booths and a specialty auxilliary booth to achieve the high production level it wants. Supported by a trained staff in an efficiently-planned shop, layouts such as this can make it possible to finish 16-20 or more vehicles a day.

Knowing your business goals will help you design the right space. As you begin, evaluate:

1. Types of Vehicles
You Repair
Make stalls for passenger cars, small trucks and vans 12 ft. wide and 24 ft. deep. This will give you at least 4 ft. of working space between cars. Increase the width of a stall lying along a wall to 15 ft. to allow enough workspace on both sides of a vehicle placed in it. Compact cars require less space. You can see how knowing the size of the vehicles you will work on – domestic, foreign, vans and pick-ups, etc, - or the percentage of each, will help you figure out the size and number of stalls you’ll need. And this same information will help you select the right body straightening and metal repair equipment.

2. Number of Vehicles Processed per Week
This is really important for choosing prep stations, spray booths, pulling systems, etc. Accelerated curing equipment such as SmartCure™ from Global Finishing Solutions can finish between 10 to 14 cars per 8-hour shift, while non-heated models may produce as few a 2 to 3 per shift. Knowing what production level you wish to achieve is critical in making the right choice.

3.Type of Work Desired
Cycle times are extremely important to collision shops in direct repair programs. Conversely, restoration shops are not as concerned with quick turnaround. Shops repairing medium or heavy-duty trucks will require different facility and equipment considerations. Again, your answers will help you and your suppliers determine your space and equipment needs. And the answers should be in your business goals.

4.Present and Future Employees
The number of employees you have working will have a lot to do with your production and space requirements.

5. Work Hours per Week
Your work hours per week split between frame, metal and refinish operations. To get the most out each department, you need the right equipment, arranged in the right way, in the right amount of space.

6. Your Desired Market or Image
A overall high-tech, professional image must be supported by high-tech equipment and a high-tech outside appearance. Consider what the interior and exterior of your building say about you to customers.

7. Location
Many shop owners are realizing that shops gain more customers if they are placed in high-visibility locations. Customers are becoming more convenience-oriented every year. An attractive shop located on a busy road is great advertisement.

isado4eva: I need a baking oven that can bake a whole variety of products including bread.
My resourses is limited and i live in port Harcourt.
A fairly used but still in good condition would be okay.
My email is ehizsteven@gmail.com
Please contact me ASAP or drop your offers with pictures.
Thanks.

Dear isado4eva(,

good day^^

Cherry here,sales manager from YOKI,thank u for your message,we are a professional supplier for spray booth,for more details,plz check our site www.yoki-spraybooth.com.our standard models are for cars,the inside dimension is 6.9x3.9x2.7m,i see u do not need such a big booth. so plz offer me the size of biggest item u would spray.our engineer would design for u,and send u 3-D diagram for booth setting.

if u have any question,feel free to reply my mail:spraybooth@msn.cn,my phone number is +86 13066349312

looking forward to hearing from u soon^^

Cherry YOKI
Sales Manager
Guangzhou YOKI Machinery Manufacturing Co,. Ltd
Skype:yoki-spraybooth
Moblie: +86 -13066349312
http://www.yoki-spraybooth.com

Dear Malele,

good day^^

i found a supplier for Nlynon strip sealing machine,they ask:
1. the nlynon strip's size,including length,width.
2.Flat pocket or vest bag
3.need to paint or no?
4.if u have trip's sample,it would be better

malele: whats the name of ur company, do u have branch in nigeria?

Dear Malele,

Chinese goverment controls any illeague things when doing business with foreign country customers,so when u do business with them,u could check the web site,the recorders on google,or through other ways.like ask them to send CE,ISO9001 certificates.

i am very sad to see the message sent by naijacutee,but there are cheaters every where,and there are honest business man around the world as well,so u need to confirm all before doing business with your suppliers.

Dear friends,

thank u for your reply,welcome u to visit our factory in Guangzhou any time^^it would take 30mins from Guangzhou Baiyun International Airport to our factory,

malele: whats the name of ur company, do u have branch in nigeria?

Dear Malele,

our company name is GUANGZHOU YOKI MACHINERY MANUFACTURING CO.,LTD,

we do not have branch in Nigeria,but we have many customers there,they are garage owner,

if u are interested or need any help,plz mail me:spraybooth@msn.cn,or talk to me online Skype:yoki-spraybooth

very glad to help u^^

Dear Friend,

good day^^

Cherry here,sales manager from BZB in China,if u are interested in builing a garage,i could offer suggestion,there are a lot of second hand cars seller in this forum,they are all your customers as well,

if u need spray booth,feel free to contact me also^^

hope your business become better and better

Cherry YOKI
Sales Manager
Guangzhou YOKI Machinery Manufacturing Co,. Ltd
Skype:yoki-spraybooth
Moblie: +86 -13066349312
http://www.yoki-spraybooth.com

Dear Friend,

good day^^

Cherry here,sales manager from BZB,we are manufacturer for spray booth,even we do not sell Nylon Sealing Machine.but i could find sellers for u in China,i could investigate facotry for u as well^^

if u do not mind,we could make friends^^i am always ready to help others

Cherry YOKI
Sales Manager
Guangzhou YOKI Machinery Manufacturing Co,. Ltd
Skype:yoki-spraybooth
Moblie: +86 -13066349312
http://www.yoki-spraybooth.com

AUTO Shop Business Goals

This shop counts on the two side-by-side Global Finishing Solutions downdraft spray booths and a specialty auxilliary booth to achieve the high production level it wants. Supported by a trained staff in an efficiently-planned shop, layouts such as this can make it possible to finish 16-20 or more vehicles a day.

Knowing your business goals will help you design the right space. As you begin, evaluate:

1. Types of Vehicles
You Repair
Make stalls for passenger cars, small trucks and vans 12 ft. wide and 24 ft. deep. This will give you at least 4 ft. of working space between cars. Increase the width of a stall lying along a wall to 15 ft. to allow enough workspace on both sides of a vehicle placed in it. Compact cars require less space. You can see how knowing the size of the vehicles you will work on – domestic, foreign, vans and pick-ups, etc, - or the percentage of each, will help you figure out the size and number of stalls you’ll need. And this same information will help you select the right body straightening and metal repair equipment.

2. Number of Vehicles Processed per Week
This is really important for choosing prep stations, spray booths, pulling systems, etc. Accelerated curing equipment such as SmartCure™ from Global Finishing Solutions can finish between 10 to 14 cars per 8-hour shift, while non-heated models may produce as few a 2 to 3 per shift. Knowing what production level you wish to achieve is critical in making the right choice.

3.Type of Work Desired
Cycle times are extremely important to collision shops in direct repair programs. Conversely, restoration shops are not as concerned with quick turnaround. Shops repairing medium or heavy-duty trucks will require different facility and equipment considerations. Again, your answers will help you and your suppliers determine your space and equipment needs. And the answers should be in your business goals.

4.Present and Future Employees
The number of employees you have working will have a lot to do with your production and space requirements.

5. Work Hours per Week
Your work hours per week split between frame, metal and refinish operations. To get the most out each department, you need the right equipment, arranged in the right way, in the right amount of space.

6. Your Desired Market or Image
A overall high-tech, professional image must be supported by high-tech equipment and a high-tech outside appearance. Consider what the interior and exterior of your building say about you to customers.

7. Location
Many shop owners are realizing that shops gain more customers if they are placed in high-visibility locations. Customers are becoming more convenience-oriented every year. An attractive shop located on a busy road is great advertisement.

These units have a relatively low weight due to the use of a
smaller water collector. This allows them to be mounted
in stages without difficulties. For the smaller units, the water
circulation can be installed below the underpressure
chamber.

Special stainless steel versions available on request.

This system is designed for use with long, bulky and
conveyor-suspended workpieces. The water collector
is located above the floor level.
To gain ready access to the filter boxes, some extra space (1100 mm)
on either side of the system is required; sizes 60 and 80 required
1100 mm on both sides. The pump and the drains must be located
on opposite sides.
Special and standard size versions in stainless specialty steel
are available on request.


Versions
nozzle cleaning
flood nozzles (changing height)
TWIN 2200 paint sludge removal unit and spray gun (not included)

Optional
Rotating workpiece holder
Turntables
Energysaving System
Lamp – explosion-protected
Pneumatic dosing pump for coagulating agent
Automatic water level control
Spray guns, material feed systems

The History of the Spray Booth

The genesis of the spray booth came about through the effects of several inventions during the late 1800's. In 1887 maintenance supervisor Joseph Binks invented a cold-water paint spraying machine to apply whitewash to the subbasement walls of his employer, Chicago's Marshall Field & Co department store. The next year Civil War veteran Dr. Allen DeVilbiss invented the atomizer for medical use. The road from these inventions more than a century ago to today's sophisticated finishing systems is a dramatic one.




The spray gun developed from those concepts as early as 1907. It was a timely idea since Henry Ford introduces his Model T the next year and mass production was just starting to evolve. The spraying of paint was first used in the furniture industry.




When spray guns were first used on the assembly line, finishing times were slashed to just eight days. Then, DuPont introduced nitrocellulose lacquer, derived from a plentiful supply of World War I surplus gun cotton. The advantage of this unique new lacquer was its fast drying time that cut the finishing times down even more.

The new material proved virtually impossible to apply with a brush, but it was discovered that spray guns could transfer the lacquer smoothly and quickly. Finishing operations could now be completed in just 3 days, and the spraying of paint replaced hand brushing, a revolutionary automotive achievement. Detroit rapidly emerged as the largest single consumer of paint spray equipment.




Natural products filling the expanding needs of the finishing industry came after that first spray gun, including exhaust canopies, like that shown on the right, which we now know as spray booths. In order for the companies making spray application systems to sell their products, they found it to their advantage to design and build overspray collection systems integrated with their spray equipment, usually for very specific industrial and automotive manufacturing applications. That in turn spawned technologies we now take for granted in spray booth design, such as water wash,downdraft airflow and many others.





"Air wash" used to be the phrase that described what we know today as dry filter technology. How many other changes have there been? In these images one can see the awareness developing for finish quality improvement and other improvements as well. For example, only a few of the old pictures show painters or applications specialists using respirators or other protection. Today, manufacturers and other employers must comply with strict regulations concerning worker safety and health. Moreover, there have been vast changes to what finishers can exhaust into the planet's air or other ecological systems.

Spray booths and their systems have been critical to our hemisphere's development and defense for nearly a century. They appear in every type of industry imaginable, not only here, but all over the world, and their enhancement of the products produced has meant a higher quality of life for everyone.

hope this helps the friends who has a garage or set up a new auto shop.

malele: Good day all
i want to be buying goods from alibaba, but am having a lot of challenges doing it,please my fellow nairalanders i need ideas on how to go about this.
all comments will be appreciated.
i want to be buying electrical materials.

Dear Malele,

we are a manufacturer from China,even we did not sell electrical instruments,but we have many customers in Nigeria,if u order a large amont of goods,u could pay T/T,L/C or westerm union,

if u do not trust the seller in China,i could investigate for u.i could go to their factory if they are in Guangdong province,China,

i am always ready to help others,if u do not mind,i could introduce some facotries for u for choices^^

The History of the Spray Booth

The genesis of the spray booth came about through the effects of several inventions during the late 1800's. In 1887 maintenance supervisor Joseph Binks invented a cold-water paint spraying machine to apply whitewash to the subbasement walls of his employer, Chicago's Marshall Field & Co department store. The next year Civil War veteran Dr. Allen DeVilbiss invented the atomizer for medical use. The road from these inventions more than a century ago to today's sophisticated finishing systems is a dramatic one.




The spray gun developed from those concepts as early as 1907. It was a timely idea since Henry Ford introduces his Model T the next year and mass production was just starting to evolve. The spraying of paint was first used in the furniture industry.




When spray guns were first used on the assembly line, finishing times were slashed to just eight days. Then, DuPont introduced nitrocellulose lacquer, derived from a plentiful supply of World War I surplus gun cotton. The advantage of this unique new lacquer was its fast drying time that cut the finishing times down even more.

The new material proved virtually impossible to apply with a brush, but it was discovered that spray guns could transfer the lacquer smoothly and quickly. Finishing operations could now be completed in just 3 days, and the spraying of paint replaced hand brushing, a revolutionary automotive achievement. Detroit rapidly emerged as the largest single consumer of paint spray equipment.




Natural products filling the expanding needs of the finishing industry came after that first spray gun, including exhaust canopies, like that shown on the right, which we now know as spray booths. In order for the companies making spray application systems to sell their products, they found it to their advantage to design and build overspray collection systems integrated with their spray equipment, usually for very specific industrial and automotive manufacturing applications. That in turn spawned technologies we now take for granted in spray booth design, such as water wash,downdraft airflow and many others.





"Air wash" used to be the phrase that described what we know today as dry filter technology. How many other changes have there been? In these images one can see the awareness developing for finish quality improvement and other improvements as well. For example, only a few of the old pictures show painters or applications specialists using respirators or other protection. Today, manufacturers and other employers must comply with strict regulations concerning worker safety and health. Moreover, there have been vast changes to what finishers can exhaust into the planet's air or other ecological systems.

Spray booths and their systems have been critical to our hemisphere's development and defense for nearly a century. They appear in every type of industry imaginable, not only here, but all over the world, and their enhancement of the products produced has meant a higher quality of life for everyone.

if any friend need spray booth,plz contact:

Cherry YOKI
Sales Manager
Guangzhou YOKI Machinery Manufacturing Co,. Ltd
Skype:yoki-spraybooth
Moblie: +86 -13066349312
http://www.yoki-spraybooth.com

Inspired, well dow\e,Keep exposing them and they will have no other option than to quit their nefarious activity：

a good artical

Rejoice5000: AKUKO..........................THEY DON COME WITH ANOTHER STYLE

dear friend,what style u would like ?

i would update

thank u for ur advice^^

Dear Sir/Madam,Cherry here,sales manager from Guangzhou YOKI Machinery Manufacturing Co.,Ltd,one of the fastest growing manufacturers among all in China.

We established in 2004,we are professional manufacturer for spray booth,mixing room,prep station,industrial painting lines,shower testing room and supply all kinds of components and tools for auto maintenance.

Our basement is in Guangzhou, covering over 380000 square meters area.another branch in Jiangmen city,which covers 60000 square meters.We have been exporting to many countries and places,such as Nigeria,Asia,South Asia,Africa,USA,Europe etc. We offer service to many famous car brands for more than 11 years,such as Lamborghini, Maserati,Maybach, Koenigseg, Pontiac,Bugatti, Rolls-Royce, AstonMartin,Cadillac，Porsche)，Mercedes-Benz，Buick,Chevrolet, Corvette,Hummer),Saturn,Ford.Mercury,Mustang）,Cobra,Lincoin）（Chryslere,Jeep）Dodge,Viper）,BMW）,Smart）,Volkswagen,Audi）,Opel），Bentley），Mini），Land rover，Jaguar，Rover，MG），Lotus），TVR) ，Alfa Romeo），Ferrari，Venturi，SAAB)，Spyker，Lexus）,JEEP etc.we also offer booths for air plane,ship,train,furniture,model,helmet and any parts need to paint.

Our company is close to Guangzhou Baiyun International Airport,HK air port or Shenzhen, Welcome to come to China andvisit our company anytime.

If you have interest in our products,please don't hesitate to contact me.You can add my Skype(yoki-spraybooth0 or send me mails.I am always online.Hope we could be good friends and partner.


Company name: Guangzhou YOKI Machinery Manufacturing Co.,Ltd.
Add: No.3, Middle Rd., Group 14, Yongxing Village, Longgui Town, Baiyun District, Guangzhou, Guangdong, China
Marketing director: Cherry Tseng
Email: spraybooth@msn.cn
SKYPE:yoki-spraybooth
Mobile: +86-13066349312
Fax: 86 20 87476599
Web: www.yoki-spraybooth.com

inspired_m:
Protect yourself thoroughly by getting a Free VIN number check on the Used car you want to buy by requesting on this thread.

A Vin Report will tell you if a car was Accident-ed, Totaled, Salvaged, Flooded, Wrecked, Stolen or has an Altered title or Mileage Rolled Back.

Every car has a Vehicle Identification Number (VIN#), which is used for everything that will ever happen to that car.

Its entire title history is on file in Several databases, Protect yourself thoroughly by getting a free VIN number check on the Used car you want to buy.

It is obtained by using the vehicle VIN numbers (Vehicle Identification Number). The VIN number is normally engraved on the car dash or on a sticker in numerous places in the car (inside the car doors, the auto windows, the car trunk, cars engine, and/or the quarter panels of the vehicle).

A Vin Check can save you Hundreds of thousands of Naira.

We want to use this medium to thank Bizbooks, Kunle-A, Mastro, Jenju and Others who have volunteered in providing free VIN reports, Your efforts and time in doing these are well appreciated.

Keep up the Good work.

Cheers

Inspired_m

i like making friends with who i always ready to help others,if anyone need spray booth to paint automobile or anything need to paint,feel free to contact me^^i could help u import from China^^

i like my sweet voices,will u call me ?+86 13066349312,but this is a mobile phone number for working(spray booth),also would like to make friends with u^^

100% Brand new YOKI brand spray booth,plz contact :

Cherry YOKI
Sales Manager
Guangzhou YOKI Machinery Manufacturing Co,. Ltd
Skype:yoki-spraybooth
Email:spraybooth@msn.cn
Moblie: +86 -13066349312
http://www.yoki-spraybooth.com

Cherry YOKI
Sales Manager
Guangzhou YOKI Machinery Manufacturing Co,. Ltd
Skype:yoki-spraybooth
Email:spraybooth@msn.cn
Moblie: +86 -13066349312
http://www.yoki-spraybooth.com

if u need yoki brand spray booth,plz contact :

Cherry YOKI
Sales Manager
Guangzhou YOKI Machinery Manufacturing Co,. Ltd
Skype:yoki-spraybooth
Email:spraybooth@msn.cn
Moblie: +86 -13066349312
http://www.yoki-spraybooth.com

Guangzhou YOKI Machinery Manufacturing Co.,Ltd
Best Choice for Garage-----China YOKI Brand Spray Booth

1.do u set up a new Garage?
2.do u need to buy a new Auto spray booth or maintain?
3.do u know China YOKI Brand Spray Booth is the best choice for u?

YOKI set up in 2002,registed in 2004,we are based in GUANGZHOU,CHINA,30mins from Guangzhou Baiyun International Airport to our factory,

We have more than 11 years professional experiences for manufacturing and designing customerized spray booth,our main products:spray booth for automobile,motorbike,helmet,truck,bus,furniture,ship,train,airplane and so on,prep station,mixing room,industrial painting lines,shower testing room,all components and tools for auto maintenance.we co-operated with other lines for auto maintenance factories,

1.Diagnostic equipment, such as the computer fault diagnosis equipment car decoder, read code card, data flow analysis, a dedicated computer and so on.
2.Detection equipment, such as test bench, test line, locator, detector, leak detector, test, endoscope, sensor, brake, analyzer, oscilloscope, smokemeter, and other testing equipment
3.Maintenance and cleaning equipment,such as Automatic transmission oil change cleaning machine, power steering oil, butter, refrigerant recovery machine, filling machine nozzle cleaning detection equipment, polishing machine, polishing machine, suction machine suction machine, etc.
4.Sheet metal painting equipment,like YOKI spray booth,mixing room,prep station,industrial painting lines, etc.
5.Maintenance supplies,such as Repair paint, coolant, brake fluid, antifreeze, lubricants, repair agent, glass of water, sealant, putty, anti-rust agent, water tank, car wax, glaze, refrigerant, automobile and motorcycle with cleaner, tire polish, cars with glue, etc
6.Repair tools, such as wrench, screwdriver, sets, tool, tool box, workbench, etc
7.Tire equipment, Balance machine, tire machine, nitrogen filling machine, tire repair machine
8.Machinery and equipment,such as lifts, jacks, crane

If u need any product for auto maintenance,feel free to contact me by skype:yoki-spraybooth.or u could find me here:


Cherry YOKI
Sales Manager
Guangzhou YOKI Machinery Manufacturing Co,. Ltd
Skype:yoki-spraybooth
Email:spraybooth@msn.cn
Moblie: +86 -13066349312
http://www.yoki-spraybooth.com