₦airaland Forum

What we teach on GIS using ArcGIS AND QGIS

1.Routing display on base maps [creating navigational path]
2. Elevations – Topo maps
3. Bathymetric survey data interpolation and display- Navigational path creations using GIS ( Maritime Charting Using ARCGIS 10.7.4 )
4. Bathymetric maps ( MARITIME CHARTING )
5. Sounding data /image report and display
6. Datum transformation ( from. local origin to UTM )
7. Noise modeling
8. Direction of water flow
9. Rasters / geodatabase
10. Image interpretation using – google earth, orthorectifed Ariel photos.
11.Drone mapping.
12.Production of digital terrain models (DTM) of the bottom surface for engineering design (tunnels, pipelines, bridges)
13.Hydrographic surveys for navigational safety using ArcGIS.
14.Geotechnical studies using ArcGIS.
15. land information
16.Contouring
17. Mapping with google earth Pro.
18. Production of digital terrain models (DTM) of the bottom for engineering design (tunnels, pipelines, bridges).
19. Pre- and post-dredging survey-( volume calculation using ARCGIS )
20. Drill Site investigations using ARCGIS
21 Drilling Bench control using ARCGIS 
22 Sedimentation mapping ( erosion and control )
23 Maritime Charting using ARCGIS 
24 Communication mobile Tracking using Gis
25 Offshore hydrocarbon mapping using Remote Sensing
26 Remote Sensing oil spillage Mapping using Remote Sensing
27. Mapping with Google Fusion Table
28. Rockworks Mapping

CONTACT : 08067285259, 09072599798
Email : jettydata2@yahoo.com

THIS TRAINING ON GIS WILL COVER ......
Ways to Use GIS in the Oil and Gas Industry
1. Prospect Analysis: Use GIS to estimate hydrocarbon reserve or volume as well as estimate reserves. Perform raster analysis based on a deterministic prospect volume of petroleum and reservoirs and spatial analysis of well data in unconventional hydrocarbon sources such as shale.
2. Data Acquisition: Acquire data for your plan survey, including restricted vs. accessible areas; farm boundaries, cities, and roads; and the potential for the use of dynamite or vibroseis. Create seismic, gravity, magnetic, and tomographic visualizations from the data.
3. Data Interpretation: Generate maps and visualizations of data for data interpretation. Create a 3D data tie and visualization. Generate surface maps including satellite imagery. Develop gravity and magnetic maps as well as seismic subsurface grids and maps from a complex collection of data.
4. Data Index Map Creation: Deliver effective digital maps for oil company staff to use to see the data that is available. They can use the data to significantly reduce the time spent on information seeking to perform their work. These maps are often available via web-based GIS applications that are extremely intuitive and user-friendly, requiring little training. All data of interest is shown side-by-side in a single user interface or dashboard.
5. Automated Map Production and Visualization: GIS provides a data-driven method for creating maps of multiple sites. Efficiently route service trucks and other vehicles and stakeholders.
6. Exploration Survey: For onshore surveys, generate a visual framework for exploration across all your assets. You have access to 3D modeling of geophysical, geological, and petrophysical hierarchical data. Offshore, utilize bathymetry mapping and access seafloor surveys. Define shipping lane maps with data integration. Perform a 3D seismic analysis and use on-demand satellite image processing for offshore exploration and mapping activities.
7. Thematic Maps: Create and display a variety of thematic maps using the substantial data set within the GIS. You can create choropleth, proportional, isarithmic (contour), dot, and dasymetric maps for virtually any use. Thematic maps are a form of data visualization that can show quantitative data in color representing density, percent, average value, or quantity of an event within a geographic area. Sequential colors represent increasing or decreasing positive or negative data values or a range of values. Isarithmic or contour maps use isolines to show 3D values for elevation or other information types for topographic mapping.
8. Acreage Analysis: With a GIS, you can evaluate and grade opportunities rapidly from a multi-disciplinary asset data set. Assign weightings and criteria, rank acreage, leases, companies, and blocks. Explore statistics on a visual platform.
9. Basin Analysis: Map the potential hydrocarbon accumulations. Perform hydrological modeling and subsurface secondary fluid migration network mapping. You can visualize flow direction and flow accumulation mapping across DEM as well as potential migration paths.
10. Play Analysis: Map risk segments for each petroleum play element. You can also map regional risk and generate geological maps. Perform ground truthing or develop validating imagery with field survey data.
11. Block Ranking: Block ranking is a quantitative analysis method used for ranking opportunities that are more efficiently performed with GIS than manually. Assess oil and gas lease blocks or licenses and grade them to mine substantial quantities of various data types to simplify the decision-making process. Block ranking is especially effective when competing for license acquisitions.
12. Well Planning: Well planning has been complicated with the increase in unconventional hydrocarbon resources such as shale oil and gas as well as coal bed methane. GIS assists in planning well pad patterns around multiple surface drilling constraints. The spatial analytics optimizes drilling patterns to find the most efficient configurations and optimizing workflows.
13. Pipeline Management: Track inspections with remote data. Analyze spatially dispersed data in real-time and access seafloor geodesy and asset management data offshore. Monitor your pipelines for geohazards and leaks.
14. Pipeline Routing: Determine the optimal path to build pipelines to carry petroleum products. Produce a least cost path analysis and network analysis for environmentally friendly and cost-effective routes. Least cost path analysis identifies the route with the fewest obstructions between a source point and the delivery destination. The analysis is based on the effort required to move through the cells in one or more raster datasets such as slope and landcover. Reduce costs by 15%.
15. Field Operations: Use flying sensor technology to gather on-demand imagery in high-resolution over a field location. Survey the site and regularly monitor your sites. Identify and manage any changes found. Using GIS for this purpose is much more cost effective than commissioning satellite capture data.
16. Distribution Management: Combine pipeline routing and management with vehicle and vessel tracking to plan and monitor all phases of hydrocarbon distribution. Visualize the complete journey from well to refinery to selling and distribution.
17. Drilling Operations: Survey the surface location, determine the type of rig, and acquire log data remotely. Geosteer the well to a precise target location and live stream the data to tie with subsurface work. Use spatial analysis within the GIS to optimize drilling patterns and configurations. Empower decision making for efficient and productive drilling operations with terrain analysis for seismic planning along with seismic survey maps and satellite image proce18.
Asset Management: A GIS stores, collects and visualizes the physical location of each asset, including pipelines, wells, pump stations, and tank terminals. It also monitors non-spatial information such as the date and installation of pipes. Monitoring of non-spatial data helps you determine when there is a need for maintenance or repair.
19. Facilities Management: Accurately monitor associated environmental changes in near real-time for health, safety, and environmental compliance with the GIS-provided 3D layout. Remotely monitor emergency responses during oil spills, explosions, or leaks.
20. Land Management: Landmen use GIS data to map important lease information such as expiry dates, overriding royalty interest, overriding royalty, working interests, lessor names, and gross and net acreage. Centralize your land management data to generate reports to comply with regulators easily.
21. Vessel Tracking: Monitor valuable water-going assets with precise location to ensure timely delivery of goods and services. Vessel tracking also supports efficient emergency responses.
22. Vehicle or Fleet Tracking: Track mobile land vehicles to ensure timely arrival without incident. In disaster events, you can easily monitor the position and speed of each vehicle and the fleet as a whole.
23. Production Monitoring: GIS data analysis enables you to monitor your complete oil and gas business. Track well production, manage pipelines and facilities and manage your port operations to follow all oil and gas products as they move about the world.

24. Well Log Digitization: Acquiring well log data in a digital format improves overall efficiency. There is no need to keep paper logs, and everyone involved with a particular well has access to the same information every time. Updating multiple documents is not needed, decreasing the potential for error and the effort required to maintain the data.
25. Environmental Monitoring: Controversy has surrounded the oil and gas industry for years regarding its environmental impact. With shale development, it is crucial to monitor environmental changes accurately. Integrate and visualize time-stamped data against baseline such as routinely updated DEMs to detect subsidence caused by resource extraction.
26. Environmental Management: The variety of types of drilling and the length of the pipelines for distribution demands environmental management to ensure safety, and environmental regulations are followed and any issues resolved immediately. Monitoring environmental data and responding to identified problems quickly reduces lost costs and maintains the land for future use once drilling and distribution are complete.
27. Remote Sensing for Terrain Stability: Your GIS can receive, store, and manipulate data from satellite interferometric synthetic aperture radar, or InSAR. Monitor potential geohazards to understand when and where to deploy staff, increase safety precautions, and continue production. For further accuracy, remote sensing data can be compared to that from ground surveys.
28. Disaster Management: As you drill deeper into the ocean or deploy fracturing operations, the need for disaster management grows. Traditional drilling and field operations already require a wealth of data to maintain safety. Oil rigs in the deep ocean and shale production add to the complexity of data accumulated. GIS takes the mountain of data and makes sense of every need for repair and maintenance activity to mitigate disasters and minimize the resources required to recover.
29. Emergency Response: The faster you can respond to an emergency, the lower the impact on operations and the environment. Gathering and analyzing remote data within the GIS database is fast and easy, allowing your emergency response to hit the ground running with the right information at the right time.
30. Decommissioning: When it comes time to shut down operations and remove assets, GIS can analyze field data from earlier oil field life cycle phases and help you remove any infrastructure and assets placed. Recover the site for land use in record time and without anything slipping through the cracks.
Contacts : 080867285259, 09072599798,
Email : jettydata2@yahoo.com

THIS TRAINING ON GIS WILL COVER ......
Ways to Use GIS in the Oil and Gas Industry
1. Prospect Analysis: Use GIS to estimate hydrocarbon reserve or volume as well as estimate reserves. Perform raster analysis based on a deterministic prospect volume of petroleum and reservoirs and spatial analysis of well data in unconventional hydrocarbon sources such as shale.
2. Data Acquisition: Acquire data for your plan survey, including restricted vs. accessible areas; farm boundaries, cities, and roads; and the potential for the use of dynamite or vibroseis. Create seismic, gravity, magnetic, and tomographic visualizations from the data.
3. Data Interpretation: Generate maps and visualizations of data for data interpretation. Create a 3D data tie and visualization. Generate surface maps including satellite imagery. Develop gravity and magnetic maps as well as seismic subsurface grids and maps from a complex collection of data.
4. Data Index Map Creation: Deliver effective digital maps for oil company staff to use to see the data that is available. They can use the data to significantly reduce the time spent on information seeking to perform their work. These maps are often available via web-based GIS applications that are extremely intuitive and user-friendly, requiring little training. All data of interest is shown side-by-side in a single user interface or dashboard.
5. Automated Map Production and Visualization: GIS provides a data-driven method for creating maps of multiple sites. Efficiently route service trucks and other vehicles and stakeholders.
6. Exploration Survey: For onshore surveys, generate a visual framework for exploration across all your assets. You have access to 3D modeling of geophysical, geological, and petrophysical hierarchical data. Offshore, utilize bathymetry mapping and access seafloor surveys. Define shipping lane maps with data integration. Perform a 3D seismic analysis and use on-demand satellite image processing for offshore exploration and mapping activities.
7. Thematic Maps: Create and display a variety of thematic maps using the substantial data set within the GIS. You can create choropleth, proportional, isarithmic (contour), dot, and dasymetric maps for virtually any use. Thematic maps are a form of data visualization that can show quantitative data in color representing density, percent, average value, or quantity of an event within a geographic area. Sequential colors represent increasing or decreasing positive or negative data values or a range of values. Isarithmic or contour maps use isolines to show 3D values for elevation or other information types for topographic mapping.
8. Acreage Analysis: With a GIS, you can evaluate and grade opportunities rapidly from a multi-disciplinary asset data set. Assign weightings and criteria, rank acreage, leases, companies, and blocks. Explore statistics on a visual platform.
9. Basin Analysis: Map the potential hydrocarbon accumulations. Perform hydrological modeling and subsurface secondary fluid migration network mapping. You can visualize flow direction and flow accumulation mapping across DEM as well as potential migration paths.
10. Play Analysis: Map risk segments for each petroleum play element. You can also map regional risk and generate geological maps. Perform ground truthing or develop validating imagery with field survey data.
11. Block Ranking: Block ranking is a quantitative analysis method used for ranking opportunities that are more efficiently performed with GIS than manually. Assess oil and gas lease blocks or licenses and grade them to mine substantial quantities of various data types to simplify the decision-making process. Block ranking is especially effective when competing for license acquisitions.
12. Well Planning: Well planning has been complicated with the increase in unconventional hydrocarbon resources such as shale oil and gas as well as coal bed methane. GIS assists in planning well pad patterns around multiple surface drilling constraints. The spatial analytics optimizes drilling patterns to find the most efficient configurations and optimizing workflows.
13. Pipeline Management: Track inspections with remote data. Analyze spatially dispersed data in real-time and access seafloor geodesy and asset management data offshore. Monitor your pipelines for geohazards and leaks.
14. Pipeline Routing: Determine the optimal path to build pipelines to carry petroleum products. Produce a least cost path analysis and network analysis for environmentally friendly and cost-effective routes. Least cost path analysis identifies the route with the fewest obstructions between a source point and the delivery destination. The analysis is based on the effort required to move through the cells in one or more raster datasets such as slope and landcover. Reduce costs by 15%.
15. Field Operations: Use flying sensor technology to gather on-demand imagery in high-resolution over a field location. Survey the site and regularly monitor your sites. Identify and manage any changes found. Using GIS for this purpose is much more cost effective than commissioning satellite capture data.
16. Distribution Management: Combine pipeline routing and management with vehicle and vessel tracking to plan and monitor all phases of hydrocarbon distribution. Visualize the complete journey from well to refinery to selling and distribution.
17. Drilling Operations: Survey the surface location, determine the type of rig, and acquire log data remotely. Geosteer the well to a precise target location and live stream the data to tie with subsurface work. Use spatial analysis within the GIS to optimize drilling patterns and configurations. Empower decision making for efficient and productive drilling operations with terrain analysis for seismic planning along with seismic survey maps and satellite image proce18.
Asset Management: A GIS stores, collects and visualizes the physical location of each asset, including pipelines, wells, pump stations, and tank terminals. It also monitors non-spatial information such as the date and installation of pipes. Monitoring of non-spatial data helps you determine when there is a need for maintenance or repair.
19. Facilities Management: Accurately monitor associated environmental changes in near real-time for health, safety, and environmental compliance with the GIS-provided 3D layout. Remotely monitor emergency responses during oil spills, explosions, or leaks.
20. Land Management: Landmen use GIS data to map important lease information such as expiry dates, overriding royalty interest, overriding royalty, working interests, lessor names, and gross and net acreage. Centralize your land management data to generate reports to comply with regulators easily.
21. Vessel Tracking: Monitor valuable water-going assets with precise location to ensure timely delivery of goods and services. Vessel tracking also supports efficient emergency responses.
22. Vehicle or Fleet Tracking: Track mobile land vehicles to ensure timely arrival without incident. In disaster events, you can easily monitor the position and speed of each vehicle and the fleet as a whole.
23. Production Monitoring: GIS data analysis enables you to monitor your complete oil and gas business. Track well production, manage pipelines and facilities and manage your port operations to follow all oil and gas products as they move about the world.

24. Well Log Digitization: Acquiring well log data in a digital format improves overall efficiency. There is no need to keep paper logs, and everyone involved with a particular well has access to the same information every time. Updating multiple documents is not needed, decreasing the potential for error and the effort required to maintain the data.
25. Environmental Monitoring: Controversy has surrounded the oil and gas industry for years regarding its environmental impact. With shale development, it is crucial to monitor environmental changes accurately. Integrate and visualize time-stamped data against baseline such as routinely updated DEMs to detect subsidence caused by resource extraction.
26. Environmental Management: The variety of types of drilling and the length of the pipelines for distribution demands environmental management to ensure safety, and environmental regulations are followed and any issues resolved immediately. Monitoring environmental data and responding to identified problems quickly reduces lost costs and maintains the land for future use once drilling and distribution are complete.
27. Remote Sensing for Terrain Stability: Your GIS can receive, store, and manipulate data from satellite interferometric synthetic aperture radar, or InSAR. Monitor potential geohazards to understand when and where to deploy staff, increase safety precautions, and continue production. For further accuracy, remote sensing data can be compared to that from ground surveys.
28. Disaster Management: As you drill deeper into the ocean or deploy fracturing operations, the need for disaster management grows. Traditional drilling and field operations already require a wealth of data to maintain safety. Oil rigs in the deep ocean and shale production add to the complexity of data accumulated. GIS takes the mountain of data and makes sense of every need for repair and maintenance activity to mitigate disasters and minimize the resources required to recover.
29. Emergency Response: The faster you can respond to an emergency, the lower the impact on operations and the environment. Gathering and analyzing remote data within the GIS database is fast and easy, allowing your emergency response to hit the ground running with the right information at the right time.
30. Decommissioning: When it comes time to shut down operations and remove assets, GIS can analyze field data from earlier oil field life cycle phases and help you remove any infrastructure and assets placed. Recover the site for land use in record time and without anything slipping through the cracks.
Contacts : 080867285259, 09072599798,
Email : jettydata2@yahoo.com

Hypack Training in Porthcourt
This tutorial and practical class on Hypack will cover the following
1. Importing Excel Echo sounding data in Hypack
2. Export .xzy file to DXF
3. Convert to IHE standard Sounding format Labelling
4. Boat Offset Measurement and Configuration for
A GPS
B SIDE SCAN
C. MAGNETOMETER
D SUB BOTTOM PROFILLER
5. Draw Plan in CAD
6. Import Plan Lines in Hypack
7. Mob and Demob
8. Data Processing and Reporting

CONTACT: 08067285259, 09072599798
Email jettydata2@yahoo.com

Training on Warehouse /inventory Management using Inflow Inventory Software
Training: Location --- Portharcourt , Nigeria
This Training will cover .....
How to Configure Warehouse using Inflow Inventory Software
How to Manage my Inventory in Inflow Inventory Software
How to easily set up products and Location
How to Easily Manage Shipment and Transfer
Inter warehouse Product Transfer
Purchase Order Inventory
Sales Order inflow
Setting up Inventory level in warrehouse
Stock accounting and product costing in Inflow Inventory software
Barcoding Scanning of products for Your Warehouse using Inflow Inventory softtware
Reporting
Recording Inflow
Job/Work Orders and many more

Contact : 08067285259, 09072599798
Email jettydata2@yahoo.com

What we teach on GIS using ArcGIS AND QGIS

1.Routing display on base maps [creating navigational path]
2. Elevations – Topo maps
3. Bathymetric survey data interpolation and display- Navigational path creations using GIS ( Maritime Charting Using ARCGIS 10.7.4 )
4. Bathymetric maps ( MARITIME CHARTING )
5. Sounding data /image report and display
6. Datum transformation ( from. local origin to UTM )
7. Noise modeling
8. Direction of water flow
9. Rasters / geodatabase
10. Image interpretation using – google earth, orthorectifed Ariel photos.
11.Drone mapping.
12.Production of digital terrain models (DTM) of the bottom surface for engineering design (tunnels, pipelines, bridges)
13.Hydrographic surveys for navigational safety using ArcGIS.
14.Geotechnical studies using ArcGIS.
15. land information
16.Contouring
17. Mapping with google earth Pro.
18. Production of digital terrain models (DTM) of the bottom for engineering design (tunnels, pipelines, bridges).
19. Pre- and post-dredging survey-( volume calculation using ARCGIS )
20. Drill Site investigations using ARCGIS
21 Drilling Bench control using ARCGIS 
22 Sedimentation mapping ( erosion and control )
23 Maritime Charting using ARCGIS 
24 Communication mobile Tracking using Gis
25 Offshore hydrocarbon mapping using Remote Sensing
26 Remote Sensing oil spillage Mapping using Remote Sensing
27. Mapping with Google Fusion Table
28. Rockworks Mapping

CONTACT : 08067285259, 09072599798
Email : jettydata2@yahoo.com

Training on Warehouse /inventory Management using Inflow Inventory Software
Training: Location --- Portharcourt , Nigeria
This Training will cover .....
How to Configure Warehouse using Inflow Inventory Software
How to Manage my Inventory in Inflow Inventory Software
How to easily set up products and Location
How to Easily Manage Shipment and Transfer
Inter warehouse Product Transfer
Purchase Order Inventory
Sales Order inflow
Setting up Inventory level in warrehouse
Stock accounting and product costing in Inflow Inventory software
Barcoding Scanning of products for Your Warehouse using Inflow Inventory softtware
Reporting
Recording Inflow
Job/Work Orders and many more

Contact : 08067285259, 09072599798
Email jettydata2@yahoo.com

Hysys Simulation Training in Portharcourt

× Introduction to Hysys
× Design a Distillation Column
× Basic Simulation
× Simulation of fractional Distillation Column of crude oil using Hysys
× Distillation Column
× Simulation of simple Natural Gas Burner
× Gas Processing
× Heat exchanger ( Shell and Tube
× Tank filling
× Crude oil Simulation
× Oil Characterization
× Dynamic Modelling
× Sizing Distillation Column
× Calculate pressure drop on pipe segment
× Amine Process
× Set blocks and adjust blocks
× Use of Spread sheets
× Using Hysys to simulate a mixer
× Refining of Recycle Loop and Set Function
× Hysys Refrigerating System
× Stream Methane Refining Simulation

Contact : 08067285259, 09072599798
Email :jettydata2@yahoo.com

Petrel Training will cover the Following
Induction
Data import
Well correlation
Fault Modeling
Vertical Layering
Geometric Layering
Upscaling in Vertical Direction – Well Logs upscaling
Facies Modeling
Petrophyisca l Modeling
Defining Fluid contact
Ploting
Well Design and complettion
Contact : 08067285259, 09072599798
Email : jettydata2@yahoo.com

Training on Warehouse /inventory Management using Odoo Inventory Software
Training: Location --- Portharcourt , Nigeria
How to Configure Warehouse using Odoo Inventory Software
How to Manage my Inventory in Odoo
How to easily set up products and Location
How to Easily Manage Shipment and Transfer
Inter warehouse Product Transfer
Inventory Valuation
Picking Method
POS warehouse Management in Odoo
Stock accounting and product costing in Odoo Inventory
Barcode Scanner for Your Warehouse using Odoo

Contact : 08067285259, 09072599798
Email jettydata2@yahoo.com

What we teach on GIS using ArcGIS AND QGIS

1.Routing display on base maps [creating navigational path]
2. Elevations – Topo maps
3. Bathymetric survey data interpolation and display- Navigational path creations using GIS ( Maritime Charting Using ARCGIS 10.7.4 )
4. Bathymetric maps ( MARITIME CHARTING )
5. Sounding data /image report and display
6. Datum transformation ( from. local origin to UTM )
7. Noise modeling
8. Direction of water flow
9. Rasters / geodatabase
10. Image interpretation using – google earth, orthorectifed Ariel photos.
11.Drone mapping.
12.Production of digital terrain models (DTM) of the bottom surface for engineering design (tunnels, pipelines, bridges)
13.Hydrographic surveys for navigational safety using ArcGIS.
14.Geotechnical studies using ArcGIS.
15. land information
16.Contouring
17. Mapping with google earth Pro.
18. Production of digital terrain models (DTM) of the bottom for engineering design (tunnels, pipelines, bridges).
19. Pre- and post-dredging survey-( volume calculation using ARCGIS )
20. Drill Site investigations using ARCGIS
21 Drilling Bench control using ARCGIS 
22 Sedimentation mapping ( erosion and control )
23 Maritime Charting using ARCGIS 
24 Communication mobile Tracking using Gis
25 Offshore hydrocarbon mapping using Remote Sensing
26 Remote Sensing oil spillage Mapping using Remote Sensing
27. Mapping with Google Fusion Table
28. Rockworks Mapping

CONTACT : 08067285259, 09072599798
Email : jettydata2@yahoo.com

Petrel Training will cover the Following
Induction
Data import
Well correlation
Fault Modeling
Vertical Layering
Geometric Layering
Upscaling in Vertical Direction – Well Logs upscaling
Facies Modeling
Petrophyisca l Modeling
Defining Fluid contact
Ploting
Well Design and complettion
Contact : 08067285259, 09072599798
Email : jettydata2@yahoo.com

Hysys Simulation Training in Portharcourt

× Introduction to Hysys
× Design a Distillation Column
× Basic Simulation
× Simulation of fractional Distillation Column of crude oil using Hysys
× Distillation Column
× Simulation of simple Natural Gas Burner
× Gas Processing
× Heat exchanger ( Shell and Tube
× Tank filling
× Crude oil Simulation
× Oil Characterization
× Dynamic Modelling
× Sizing Distillation Column
× Calculate pressure drop on pipe segment
× Amine Process
× Set blocks and adjust blocks
× Use of Spread sheets
× Using Hysys to simulate a mixer
× Refining of Recycle Loop and Set Function
× Hysys Refrigerating System
× Stream Methane Refining Simulation

Contact : 08067285259, 09072599798
Email :jettydata2@yahoo.com

Training on Warehouse /inventory Management using Odoo Inventory Software
Training: Location --- Portharcourt , Nigeria
How to Configure Warehouse using Odoo Inventory Software
How to Manage my Inventory in Odoo
How to easily set up products and Location
How to Easily Manage Shipment and Transfer
Inter warehouse Product Transfer
Inventory Valuation
Picking Method
POS warehouse Management in Odoo
Stock accounting and product costing in Odoo Inventory
Barcode Scanner for Your Warehouse using Odoo

Contact : 08067285259, 09072599798
Email jettydata2@yahoo.com

Hysys Simulation Training in Portharcourt

× Introduction to Hysys
× Design a Distillation Column
× Basic Simulation
× Simulation of fractional Distillation Column of crude oil using Hysys
× Distillation Column
× Simulation of simple Natural Gas Burner
× Gas Processing
× Heat exchanger ( Shell and Tube
× Tank filling
× Crude oil Simulation
× Oil Characterization
× Dynamic Modelling
× Sizing Distillation Column
× Calculate pressure drop on pipe segment
× Amine Process
× Set blocks and adjust blocks
× Use of Spread sheets
× Using Hysys to simulate a mixer
× Refining of Recycle Loop and Set Function
× Hysys Refrigerating System
× Stream Methane Refining Simulation

Contact : 08067285259, 09072599798
Email :jettydata2@yahoo.com

Training on Warehouse /inventory Management using Odoo Inventory Software
Training: Location --- Portharcourt , Nigeria
How to Configure Warehouse using Odoo Inventory Software
How to Manage my Inventory in Odoo
How to easily set up products and Location
How to Easily Manage Shipment and Transfer
Inter warehouse Product Transfer
Inventory Valuation
Picking Method
POS warehouse Management in Odoo
Stock accounting and product costing in Odoo Inventory
Barcode Scanner for Your Warehouse using Odoo

Contact : 08067285259, 09072599798
Email jettydata2@yahoo.com

What we teach on GIS using ArcGIS AND QGIS

1.Routing display on base maps [creating navigational path]
2. Elevations – Topo maps
3. Bathymetric survey data interpolation and display- Navigational path creations using GIS ( Maritime Charting Using ARCGIS 10.7.4 )
4. Bathymetric maps ( MARITIME CHARTING )
5. Sounding data /image report and display
6. Datum transformation ( from. local origin to UTM )
7. Noise modeling
8. Direction of water flow
9. Rasters / geodatabase
10. Image interpretation using – google earth, orthorectifed Ariel photos.
11.Drone mapping.
12.Production of digital terrain models (DTM) of the bottom surface for engineering design (tunnels, pipelines, bridges)
13.Hydrographic surveys for navigational safety using ArcGIS.
14.Geotechnical studies using ArcGIS.
15. land information
16.Contouring
17. Mapping with google earth Pro.
18. Production of digital terrain models (DTM) of the bottom for engineering design (tunnels, pipelines, bridges).
19. Pre- and post-dredging survey-( volume calculation using ARCGIS )
20. Drill Site investigations using ARCGIS
21 Drilling Bench control using ARCGIS 
22 Sedimentation mapping ( erosion and control )
23 Maritime Charting using ARCGIS 
24 Communication mobile Tracking using Gis
25 Offshore hydrocarbon mapping using Remote Sensing
26 Remote Sensing oil spillage Mapping using Remote Sensing
27. Mapping with Google Fusion Table
28. Rockworks Mapping

CONTACT : 08067285259, 90972599798
Email : jettydata2@yahoo.com

Training on Warehouse /inventory Management using Odoo Inventory Software
Training: Location --- Portharcourt , Nigeria
How to Configure Warehouse using Odoo Inventory Software
How to Manage my Inventory in Odoo
How to easily set up products and Location
How to Easily Manage Shipment and Transfer
Inter warehouse Product Transfer
Inventory Valuation
Picking Method
POS warehouse Management in Odoo
Stock accounting and product costing in Odoo Inventory

Contact : 08067285259, 08089597516
Email jettydata2@yahoo.com

What we teach on GIS using ArcGIS AND QGIS

1.Routing display on base maps [creating navigational path]
2. Elevations – Topo maps
3. Bathymetric survey data interpolation and display- Navigational path creations using GIS ( Maritime Charting Using ARCGIS 10.7.4 )
4. Bathymetric maps ( MARITIME CHARTING )
5. Sounding data /image report and display
6. Datum transformation ( from. local origin to UTM )
7. Noise modeling
8. Direction of water flow
9. Rasters / geodatabase
10. Image interpretation using – google earth, orthorectifed Ariel photos.
11.Drone mapping.
12.Production of digital terrain models (DTM) of the bottom surface for engineering design (tunnels, pipelines, bridges)
13.Hydrographic surveys for navigational safety using ArcGIS.
14.Geotechnical studies using ArcGIS.
15. land information
16.Contouring
17. Mapping with google earth Pro.
18. Production of digital terrain models (DTM) of the bottom for engineering design (tunnels, pipelines, bridges).
19. Pre- and post-dredging survey-( volume calculation using ARCGIS )
20. Drill Site investigations using ARCGIS
21 Drilling Bench control using ARCGIS
22 Sedimentation mapping ( erosion and control )
23 Maritime Charting using ARCGIS
24 Communication mobile Tracking using Gis
25 Offshore hydrocarbon mapping using Remote Sensing
26 Remote Sensing oil spillage Mapping using Remote Sensing
27. Mapping with Google Fusion Table
28. Rockworks Mapping

CONTACT : 08067285259, 90972599798
Email : jettydata2@yahoo.com

Fishing Tools Operation Training in Portharcourt
This Course will cover the following course outline ….
Basic of BAH Calculation
Drilling String fair line
Pipe Recovery System
External Catch Tools
Specials Tools
Wash Over Operations
Jar and Jarring Operations
Fishing Assemblies
Contact : 08067285259, 09072599798
Email : jettdata2@yaho.com

Hysys Simulation Training in Portharcourt

× Introduction to Hysys
× Design a Distillation Column
× Basic Simulation
× Simulation of fractional Distillation Column of crude oil using Hysys
× Distillation Column
× Simulation of simple Natural Gas Burner
× Gas Processing
× Heat exchanger ( Shell and Tube
× Tank filling
× Crude oil Simulation
× Oil Characterization
× Dynamic Modelling
× Sizing Distillation Column
× Calculate pressure drop on pipe segment
× Amine Process
× Set blocks and adjust blocks
× Use of Spread sheets
× Using Hysys to simulate a mixer
× Refining of Recycle Loop and Set Function
× Hysys Refrigerating System
× Stream Methane Refining Simulation

Contact : 08067285259, 08089597516
Email :jettydata2@yahoo.com

GIS FOR GEOSPHYICAL SURVEY TRAINING IN PORTHARCOURT
Using Gis and sophisticated Marine Geophysical sensors to make reliable Maps of seafloor and Sub bottom for Geology
The Training will cover
Hydrographic Survey , Geophysical Survey, Sediment Sampling , Marine Vegetation Survey , Pipeline Survey , Paleochannel , Sand Resources Survey.
1 Mosaic of acoustic Images mapping ….. Images are interpreted to produce maps that show the lateral extent of surficial lithology (Silt and Sand , Gravel ) and Natural bedrock Cultural ( Ship recks and Pipeline 0r Biology ( fish and vegetation )
`SIDESCAN --- 100khz – 500khz is used for Geological characterization, research and recovery survey mapping.
While 600khz --- 1200khz is used for high resolution archheological and marine Vegetation Mappimg and survey
2. Magnetic contour Survey and Mapping……
Using Marine Magnetometer ----Locating buried pipe using Marine Magnetometer.
For locating buried or submerged oil pipelines , sunken ships based on their positive and Negative Magnetic anomaly.
We then prepare magnetic contour MAPS that reveal normalies that represent buried ferrous objects that disrupts the magnetic field.
Magnetometer is towed about 200’ behind the survey vessel to prevent data interference on the ferrous on board the survey vessel
3. Sediment Sampling Mapping…….
Using Vibratory Corers
a. Vibracorers … Capable o collecting continuous core samples of 5’ to 30’
b. Gravity Corer --- 1” to 5’ core sample of unsolidated sediments
c. Alpine Vibrocorer …. Capable to penetrate into the sea floor about 20’ to 40” to collect continuous stratigraphic sequence of soil material
4. Subbottom Profiler ….( Seismic Refraction )
Subbottom Profiling to determine pipe’s depth-of-burial.
Mapping the cross sectional profile of sediment layer sbelow the seafloor to produce from seismic data subbottom crosss sections and iso pach / sediment thinkness contour charts.
5. Penetrometer profile mapping…. Display the rate of core depth refusal.
We genegrate the penetration profile maps
CONTACT 09072599798, 08067285259 :

GIS FOR GEOSPHYICAL SURVEY TRAINING IN PORTHARCOURT
Using Gis and sophisticated Marine Geophysical sensors to make reliable Maps of seafloor and Sub bottom for Geology
The Training will cover
Hydrographic Survey , Geophysical Survey, Sediment Sampling , Marine Vegetation Survey , Pipeline Survey , Paleochannel , Sand Resources Survey.
1 Mosaic of acoustic Images mapping ….. Images are interpreted to produce maps that show the lateral extent of surficial lithology (Silt and Sand , Gravel ) and Natural bedrock Cultural ( Ship recks and Pipeline 0r Biology ( fish and vegetation )
`SIDESCAN --- 100khz – 500khz is used for Geological characterization, research and recovery survey mapping.
While 600khz --- 1200khz is used for high resolution archheological and marine Vegetation Mappimg and survey
2. Magnetic contour Survey and Mapping……
Using Marine Magnetometer ----Locating buried pipe using Marine Magnetometer.
For locating buried or submerged oil pipelines , sunken ships based on their positive and Negative Magnetic anomaly.
We then prepare magnetic contour MAPS that reveal normalies that represent buried ferrous objects that disrupts the magnetic field.
Magnetometer is towed about 200’ behind the survey vessel to prevent data interference on the ferrous on board the survey vessel
3. Sediment Sampling Mapping…….
Using Vibratory Corers
a. Vibracorers … Capable o collecting continuous core samples of 5’ to 30’
b. Gravity Corer --- 1” to 5’ core sample of unsolidated sediments
c. Alpine Vibrocorer …. Capable to penetrate into the sea floor about 20’ to 40” to collect continuous stratigraphic sequence of soil material
4. Subbottom Profiler ….( Seismic Refraction )
Subbottom Profiling to determine pipe’s depth-of-burial.
Mapping the cross sectional profile of sediment layer sbelow the seafloor to produce from seismic data subbottom crosss sections and iso pach / sediment thinkness contour charts.
5. Penetrometer profile mapping…. Display the rate of core depth refusal.
We genegrate the penetration profile maps
CONTACT 09072599798, 08067285259 :

Fishing Tools Operation Training in Portharcourt
This Course will cover the following course outline ….
Basic of BAH Calculation
Drilling String fair line
Pipe Recovery System
External Catch Tools
Specials Tools
Wash Over Operations
Jar and Jarring Operations
Fishing Assemblies
Contact : 08067285259, 09072599798
Email : jettdata2@yaho.com

QUICK Books Training in Portharcourt
1 Introduction to QuickBooks Online
which QuickBooks Online is right for me?
QuickBooks Online Packages Available
To find an expert in QuickBooks Online
Benefits of using QuickBooks Online
Mobile devices and QuickBooks Online
Our case study for today’s training
2 Navigating QuickBooks Online
Navigating the QuickBooks Online Home Page
3 Company File Setup
GST Setup
Using the Tax Centre
Accounts
Taxable Payments Annual Report (TPARS)
Managing Users
Multi
Currency
Importing Data
Customers Import
Products and
Services
4 Online Banking
Linking Bank Accounts & Importing Bank transactions
Linking Bank Accounts or Credit Cards for
Importing Bank Transactions
How to Add Transactions
How to Match Transactions
Processing Transactions Debits
Processing Transactions Credits
How to accept multiple transactions in batches
Adding Attachments to Transactions
Setting up Bank Rules

5 Transactions
Creating and Managing Quotes
Creating and Managing Invoices
Receiving Payment of Invoices
Customising Invoices
Attachments
Expense Transactions
Bills
Paying Bills
Recurring transactions
Class and Location Tracking
Turning on Class Tracking and/or Location Tracking
Partial Purchase Orders
Create a Partial Purchase Order
6 Budgets
Budget vs. Actuals
Set up Budget Report
7. Projects
Turn on Projects in Settings
Create and track your projects
Add a transaction to a project outside of Projects
8. PayRoll
To Setup Payroll
Pay Run Settings
Setup Employees
Setup a Pay Run
Payroll Reports
Important Reports to note
9. Superannuation & Click Super
Accessing Super Payments within QuickBooks Online
10. Bank Reconciliation
Banking Reconciliation Tools
11 Managing GST and BAS
QuickBooks Online Helps You to Manage Your GST.
BAS Reports Used to Review
Revision of BAS
Completing the BAS
GST Except
ion Detail
Processing GST in the New Tax Centre
12 Running Reports
Profit & Loss / Balance Sheet
Customising Reports
Report Groups
Automated Reports
13 Mobile Apps Take the Ipad / Iphone Tour
Creating and Sending Quotes on an iPad/iPhone
Capturing Expenses on an iPad/iPhone
Run reports on an iPad/iPhone

CONTACT : 08067285259, 09072599798
Email: jettydata2@yaho.com

Training on Warehouse /inventory Management using Odoo Inventory Software
Training: Location --- Portharcourt , Nigeria
How to Configure Warehouse using Odoo Inventory Software
How to Manage my Inventory in Odoo
How to easily set up products and Location
How to Easily Manage Shipment and Transfer
Inter warehouse Product Transfer
Inventory Valuation
Picking Method
POS warehouse Management in Odoo
Stock accounting and product costing in Odoo Inventory

Contact : 08067285259, 08089597516
Email jettydata2@yahoo.com

Training on Warehouse /inventory Management using Odoo Inventory Software
Training: Location --- Portharcourt , Nigeria
How to Configure Warehouse using Odoo Inventory Software
How to Manage my Inventory in Odoo
How to easily set up products and Location
How to Easily Manage Shipment and Transfer
Inter warehouse Product Transfer
Inventory Valuation
Picking Method
POS warehouse Management in Odoo
Stock accounting and product costing in Odoo Inventory

Contact : 08067285259, 08089597516
Email jettydata2@yahoo.com

GIS FOR GEOSPHYICAL SURVEY TRAINING IN PORTHARCOURT
Using Gis and sophisticated Marine Geophysical sensors to make reliable Maps of seafloor and Sub bottom for Geology
The Training will cover
Hydrographic Survey , Geophysical Survey, Sediment Sampling , Marine Vegetation Survey , Pipeline Survey , Paleochannel , Sand Resources Survey.
1 Mosaic of acoustic Images mapping ….. Images are interpreted to produce maps that show the lateral extent of surficial lithology (Silt and Sand , Gravel ) and Natural bedrock Cultural ( Ship recks and Pipeline 0r Biology ( fish and vegetation )
`SIDESCAN --- 100khz – 500khz is used for Geological characterization, research and recovery survey mapping.
While 600khz --- 1200khz is used for high resolution archheological and marine Vegetation Mappimg and survey
2. Magnetic contour Survey and Mapping……
Using Marine Magnetometer ----Locating buried pipe using Marine Magnetometer.
For locating buried or submerged oil pipelines , sunken ships based on their positive and Negative Magnetic anomaly.
We then prepare magnetic contour MAPS that reveal normalies that represent buried ferrous objects that disrupts the magnetic field.
Magnetometer is towed about 200’ behind the survey vessel to prevent data interference on the ferrous on board the survey vessel
3. Sediment Sampling Mapping…….
Using Vibratory Corers
a. Vibracorers … Capable o collecting continuous core samples of 5’ to 30’
b. Gravity Corer --- 1” to 5’ core sample of unsolidated sediments
c. Alpine Vibrocorer …. Capable to penetrate into the sea floor about 20’ to 40” to collect continuous stratigraphic sequence of soil material
4. Subbottom Profiler ….( Seismic Refraction )
Subbottom Profiling to determine pipe’s depth-of-burial.
Mapping the cross sectional profile of sediment layer sbelow the seafloor to produce from seismic data subbottom crosss sections and iso pach / sediment thinkness contour charts.
5. Penetrometer profile mapping…. Display the rate of core depth refusal.
We genegrate the penetration profile maps
CONTACT 09072599798, 08067285259

Hysys Simulation Training in Portharcourt

× Introduction to Hysys
× Design a Distillation Column
× Basic Simulation
× Simulation of fractional Distillation Column of crude oil using Hysys
× Distillation Column
× Simulation of simple Natural Gas Burner
× Gas Processing
× Heat exchanger ( Shell and Tube
× Tank filling
× Crude oil Simulation
× Oil Characterization
× Dynamic Modelling
× Sizing Distillation Column
× Calculate pressure drop on pipe segment
× Amine Process
× Set blocks and adjust blocks
× Use of Spread sheets
× Using Hysys to simulate a mixer
× Refining of Recycle Loop and Set Function
× Hysys Refrigerating System
× Stream Methane Refining Simulation

Contact : 08067285259, 09072599798
Email :jettydata2@yahoo.com

What we teach using ArcGIS T0 10.7.4

1.Routing display on base maps [creating navigational path]
2. Elevations – Topo maps
3. Bathymetric survey data interpolation and display- Navigational path creations using GIS ( Maritime Charting Using ARCGIS 10.7.4 )
4. Bathymetric maps ( MARITIME CHARTING )
5. Sounding data /image report and display
6. Datum transformation ( from. local origin to UTM )
7. Noise modeling
8. Direction of water flow
9. Rasters / geodatabase
10. Image interpretation using – google earth, orthorectifed Ariel photos.
11.Drone mapping.
12.Production of digital terrain models (DTM) of the bottom surface for engineering design (tunnels, pipelines, bridges)
13.Hydrographic surveys for navigational safety using ArcGIS.
14.Geotechnical studies using ArcGIS.
15. land information
16.Contouring
17. Mapping with google earth Pro.
18. Production of digital terrain models (DTM) of the bottom for engineering design (tunnels, pipelines, bridges).
19. Pre- and post-dredging survey-( volume calculation using ARCGIS )
20. Drill Site investigations using ARCGIS
21 Drilling Bench control using ARCGIS 
22 Sedimentation mapping ( erosion and control )
23 Maritime Charting using ARCGIS 
24 Communication mobile Tracking using Gis
25 Offshore hydrocarbon mapping using Remote Sensing
26 Remote Sensing oil spillage Mapping using Remote Sensing
27. Mapping with Google Fusion Table
28. Rockworks Mapping

CONTACT : 08067285259, 90972599798
Email : jettydata2@yahoo.com

Training on Warehouse /inventory Management using Odoo Inventory Software
Training: Location --- Portharcourt , Nigeria
How to Configure Warehouse using Odoo Inventory Software
How to Manage my Inventory in Odoo
How to easily set up products and Location
How to Easily Manage Shipment and Transfer
Inter warehouse Product Transfer
Inventory Valuation
Picking Method
POS warehouse Management in Odoo
Stock accounting and product costing in Odoo Inventory

Contact : 08067285259, 09072599798
Email jettydata2@yahoo.com

What we teach using ArcGIS T0 10.7.4

1.Routing display on base maps [creating navigational path]
2. Elevations – Topo maps
3. Bathymetric survey data interpolation and display- Navigational path creations using GIS ( Maritime Charting Using ARCGIS 10.7.4 )
4. Bathymetric maps ( MARITIME CHARTING )
5. Sounding data /image report and display
6. Datum transformation ( from. local origin to UTM )
7. Noise modeling
8. Direction of water flow
9. Rasters / geodatabase
10. Image interpretation using – google earth, orthorectifed Ariel photos.
11.Drone mapping.
12.Production of digital terrain models (DTM) of the bottom surface for engineering design (tunnels, pipelines, bridges)
13.Hydrographic surveys for navigational safety using ArcGIS.
14.Geotechnical studies using ArcGIS.
15. land information
16.Contouring
17. Mapping with google earth Pro.
18. Production of digital terrain models (DTM) of the bottom for engineering design (tunnels, pipelines, bridges).
19. Pre- and post-dredging survey-( volume calculation using ARCGIS )
20. Drill Site investigations using ARCGIS
21 Drilling Bench control using ARCGIS 
22 Sedimentation mapping ( erosion and control )
23 Maritime Charting using ARCGIS 
24 Communication mobile Tracking using Gis
25 Offshore hydrocarbon mapping using Remote Sensing
26 Remote Sensing oil spillage Mapping using Remote Sensing
27. Mapping with Google Fusion Table
28. Rockworks Mapping

CONTACT : 08067285259, 09072599798
Email : jettydata2@yahoo.com