₦airaland Forum

Give us a call.

Give us a call today

Enhance your career as an engineer or technician in the field of instrumentation and automation

Enhance your career.

Seize this opportunity and be become employable or self employed.

Let's hear from you.

Let's hear from you.

Let's hear from you.

Time is ticking. Call us now for seat reservation and enquiry.

Time is ticking. Call us now for seat reservation.

Time is ticking. Call us now.

Instrumentation control and automation engineers and technicians let's get it all documented and well interpreted and understood.

Get in touch now.

Hands on skill

Hurry now.

This 4-day course offers a combination of practical information and hands-on experience, covering proper calibration, installation and maintenance of electronic and pneumatic instruments. Participant will examine electronic and pneumatic instruments; and procedures for calibrating them.

Objective:
At the end of the course, participants will be able to:
• Understand calibration principles
• Employ proper safety practices during installation, calibration, and maintenance procedures Connect wiring in an electronic control loop
• Select and operate test equipment to measure electrical properties and calibrate instruments
• Calibrate electronic and pneumatic instruments
• Recognize the importance of maintenance in the proper operation of instruments and control systems
• Observe safe practices during calibration

Content:
• What is calibration
• Concept and traceability of calibration
• Loop Characteristics: Current Loop | Power Source
• Laboratory and Test Equipment: Multimeter | Process Calibrator
• Calibration and Configuration: Instrument Performance | Calibration Standards | Device Calibration | Calibration Documentation
• Instrument Maintenance: Corrective | Preventive | Predictive
• Installation: Grounding and Isolation | Plant Conditions | Documentation
• Safety in Hazardous Locations: Location Classification | Explosion Proofing | Purging and Pressurization | Intrinsic Safety




DATE: 7th - 12th November, 2016
TIME: 9AM


TO REGISTER, CALL Gabriel on 08151856066

VENUE: 9 Obidike lane, Off School Road, Port Harcourt, Nigeria
WHATSAPP: 08151856066
EMAIL: training@grts.com.ng
WEBSITE: www.grts.com.ng

Our practical site

This will be interpreted. Get in touch now.

Don't be left out.

In the field of instrumentation and control, if it's not documented, it's not done.

Documentation is the key.

This 3-day course will present the methodology for the development of piping and instrumentation diagrams (P&IDs) and other related drawings. This course covers both the development and the reading/interpreting of these documents, making it beneficial to engineers, designers, software programmers, system integrators, and technicians.

Objective:
• Design, develop, and interpret the documents used to define instruments and control systems for a typical project, including P &IDs, loop diagrams, specification forms, instrument lists, logic diagrams, installation details, and location plans
• Explain the information included on each document
• Plan document development as it relates to project management
• Apply ISA standards for symbols and terminology to documentation



Content:
• P&IDs: Definition and Use | ISA Standard Symbols | Interpretation
• Introduction to instrument components and piping related components
• Legend Sheet and Uses
• Loop Diagrams: Purpose and Interpretation
• Instrument Data Sheet
• Instrument Lists: Definition and Uses
• Input and Output List
• Installation Details
• Location Plans: Purpose and Development
• Standards and Documentation: ISA 5.1 – ISA 5.6


Classroom Exercises:
• Develop diagrams for flow, level, temperature, and pressure loops
• Develop documentation for sample instruments
• Design and develop a P&ID from a flow diagram and process description
• Develop other project documents


To register, call Gabriel on 08151856066

WHATSAPP: 08151856066
EMAIL: training@grts.com.ng
WEBSITE: www.grts.com.ng

We have the tools, the techniques and the man power... waiting to deliver the best of services to you. Don't be left out. Hurry now!!!

We await your call.

Get in touch for seat reservation.

Be trained by professionals.

This 6-day course aim is to enable trainees to understand the Instruments used in the industry and their application in control of process plants, and also to understand their operational principles. This course combines lecture and hands-on labs to provide an overview of industrial measurement and control for engineers, technicians and managers.

Objectives:

At the end of this course, participant will be able to:
• Defining what to measure, why measure and how to measure
• Understand the Principle of measurement and control of process variables such as temperature, flow, level and pressure.
• Techniques to measure and control
• Differentiate between continuous, batch, and discrete control
• Apply specific ISA standards to interpret symbols and drawings associated with process control documentation
• Differentiate between various control system architectures
• Apply safe laboratory practices

Content:
• Introduction to Instrumentation and Control:
Definition of instrumentation & Control terms | Typical Process Scenario
Safety measures, Instrumentation and process control system maintenance

• Concepts of Process Control:
Typical Industries | Definitions | Continuous vs. Batch | Feedback Loop

• Industrial Measurement Systems:
Process Measurement | Instrument Performance Terminology | Standard Signals | Repeatability and Accuracy


• Pressure Measurements and Instruments:
Concepts | Pressure Units | Pascal's Law | Absolute and Atmospheric Pressure | Pressure Gauge and Accessories | Bourdon Tube: Spiral and Helical Elements | Differential Pressure Measurement | Diaphragm Seals
• Temperature Measurement and Instruments:
Temperature Scales | Bimetallic Thermometers | Thermocouples | Resistance Temperature Detectors (RTDs) | Thermowells

• Level Measurement and Instruments:
Sight Glasses | Float and Cable Arrangements | Ultrasonic | Differential Pressure Level Measurement | Rotating Paddle | Radar Level System | Interface Measurement | Hydrostatic Pressure | Open and Close Tank Level

• Flow Measurement and Instruments:
Types of Flow | Reynolds Number | Differential Pressure Flow Meters: Orifices, Flow Nozzle, Venturi and Pitot | Target Flow Meter | Rotameter or Variable Area Meter | Magnetic, Vortex, Turbine, and Ultrasonic Flow Meters | Coriolis and Thermal Mass Flow Meters | Positive Displacement Flow Meters | Flow Meter Selection

• Control Valves:
Types | Valve Characteristics | Inherent Flow Characteristics | Valve Sizing | Valve Tagging | Pressure Rating | Cavitation/Flashing | Noise: Cause/Effect and Prevention | Actuators | Air to Extend/Retract | Positioners | Installation, Maintenance and Troubleshooting Considerations | Specification and Selection

• Documentation:
Instrument Line Symbols | Function Symbols | Identification Letters | Piping and Instrumentation Drawing (P&ID) and Interpretation | Legend Sheets | General process and safety device Symbols | Loop Diagram | Instrument List | Instrument Specification Sheet | Introduction to instrument components and piping related components | Valve types and function (manual and controlled)

• Hazardous Area Classification:
ATEX 95 and 137 | Zones

• Ingress Protection:
IP Codes



DATE: 7th - 12th November, 2016
TIME: 11AM
EXAMINATION AND CERTIFICATION



TO REGISTER, CALL Gabriel on 08151856066

VENUE: 9 Obidike lane, Off School Road, Port Harcourt, Nigeria
WHATSAPP: 08151856066
EMAIL: training@grts.com.ng
WEBSITE: www.grts.com.ng