₦airaland Forum

How to perform correctly in EDIBLE OIL REFINING PLANT operation?

1. Before refining, the crude oil must be sampled about the impurity content, acid value, phosphorus content, color more relevant detection data, select the appropriate process and technical parameters.
2. Edible Oil Refining Plant Operation must ensure that the amount of processed oil is basically stable, so that the acid and alkali adding amount can be precision,in oder to ensure that the appropriate addition of acid and alkali.
3. Washing and drying is very important in the oil plant, which is ignored by many manufacturers.
4. Bleaching section activated clay is very important, not only to consider the clay cost, but also considering clay quality, activity, and filtration performance of waste clay residual oil rate.
5. No matter what forms of the deodorizer, must ensure that the high vacuum deacidification deodorization, absolute pressure should be less than 500Pa.
6. Vacuum degree are the key conditions to ensure the process effect of decolorization and deodorization section .

Principle of the Edible Oil Refining Plant Operation
the plants oils from first 2 steps always have some undesired impurities, such as FFA( Free Fatty Acid), so, The foremost aim of refining process is removing extra free fatty acids and preventing the oils from oxidation, but not only the FFA, it also removes the unwanted impurities, color and odor which may have a negative impact on the taste, odor, and appearance of the oil. The oil after refinery process is thinner without FFA, colorless and odorless, and also, it is good for human health and easy to storage.

Features of the two method Edible Oil Refining Plant Operation
There are two method of the Edible Oil Refining Plant Operation: Chemical and physical.
1,Chemical Refining
The refined oil is consistent and stable.
Excellent adaptability and less requirement to oil quality.
Less bleaching earth is needed.
2,Physical Edible Oil Refining Operation method
High oil refining rate, less oil loss.
No waste water discharged.
Especially suitable for oil of high acid value, low gum content.
More FFA distilled out.
http://www.edible-oil-refining-plant.com

When the OIL REFINING MACHINE operation, we need to know that, oils from oil extraction workshops can not be eat directly, still contains many oil-insoluble and oil-soluble impurities, need to remove the harmful things, The oil insoluble material can removed by filtration device, and the soluble impurities,such as FFA (free fatty acid), gums, wax are removed by different processes including degumming (removing of phosphatides), alkali refining (washing with alkaline solution to remove free fatty acids, colorants, insoluble matter and gums) and bleaching(with activated earth or activated carbon to remove color and other impurities, through Oil Refining Machine Operation, the oils are more suitable for human bodys and easy to storage.

There process types of Oil Refining Machine Operation
1). Intermittent Refining Process
It’s suitable for small scale oil refining plant. It’s major process including degumming, deacidification, bleaching, deodorization.
2). Semicontinuous Refining Process
It’s major process including degumming, deacidification, bleaching, deodorization.
3). Continuous Refining Process
It’s suitable for large scale oil refining plant. The major process including degumming and alkali refining, deacidification, water washing, drying, bleaching, filtration, deodorization.

Features of Oil Refining Machine Operation
1. Massively increase heat recovery system, improve the Inefficient use of heat, save energy.
2.Various new technology are reasonable combined in oil refinery process
3.the palm oil refining production line adopting soft column deodorization tower, steam consumption is greatly saved.
4. Adopting all kinds of heat exchangers greatly saves energy consumption

Oil Refining Machine Operation main sections
(1).P-acid degumming operation:
Drawing the filtered or settled crude oilinto the neutral pot, control oil temperature 40 ° C, liquidlevel cover theneutral pot volume about 80 %.Add into theneutral pot Pacid with 85% concentration, 0.1-0.2% oil weight.Start up neutral pot, make main shalf stirring at 60-70 r/min, finish de-gumming in 30 min.
Adjust the neutral pot oil temp to about 85 °C, add into hot water whose temp higher oil temp 10-15° C, the water use amount each time is 10-15% oil weight.

(2)alkali de-acid operation of Oil Refining Machine Operation
After finish degumming process, at once add into lye carrying alkali refining deacid, lye concentration 16 ° Be ′, super alkali is 0.1to0.3% oil weight, after finish adding, continuous stirring 30min, when soap particles accumulated condensing, should reduce stirring speed, 30r/min avoid emulsion. After adding alkali, gradually rising temp to the end temp 65 ° C, see to that the rising temp speed should control at 1 degree per minute, not too fast. Shut off neutral pot drive part, theoil settled in the pot 6-8 hours, make oilseparate from soap.

(3).de-coloring of il Refining Machine Operation:
Pump the oil netralized into decolorizer vessel, samely mixing to rise its temperature to 90 degrees,then mixing for 30 mins,to reduce water to 0.1% ,then put a little clay (decoloring media) 24 % of total oil ,mixing for 30 mins ,to reduce the temperature to 70 degrees, then filte the clay with oil filter,to get the oil decolorized .

(4).De-odor operation:
Open the vacuum valve, make the pot inside vacuum degree gradually reach above 750mmHg. Inhale the decolor oil after filter into the deodor pot, see to that oil amount should coverthe pot volume 60% Control oil temp at 240 ° C to 260 ° C, use thedirectsteam under 0.1 to0.3Mpa to distillate 3-4 hours.

(5).De-Waxing operation
Lower temperature for rid off the wax for better quality oil,which adopt two steps. The basic oil refining machine operation process: heating oil to 70 degrees for melting the wax into liquid ,then cool it slowly to 25 degrees and keep it for 24to48 hrs; the cooling speed is 1 degrees/h better,then filter it with crystal plate filter to get the clear oil and most of wax ,then clear oil go into the second Crystal vessel ,the operating method is the same as first .the wax of oil would be controlled to under 0.03%.

We are located in Zhengzhou City, Henan Province, which is the center of China with convenient transportation for developing industry. our complany produce kinds of food making machine like Oil Refining Machine Operation, rice mill machine and so on. our company is a relaible mechinery eqipment,our products are highly qulity.we have established busniess relations with many countries.
http://www.oil-refining-machine.org

How Does Grape Seed OIL EXTRACTION MACHINE Work?



1.Solvent extraction of Grape Seed Oil Extraction Machine
After drying, crushing, wetting, then we use organic solvent to spray and soak the grape seeds, and make grape seed oil extracted from the grape seeds. And then we isolate the mixed oil to get grape seed oil.
Grape Seed Oil Extraction Machine has higher oil yield and solvent extraction process is more complete, and the solvent can be recycled. But in the process of solvent, it may easily make unsaturated fatty acid decomposition and make the crude oil saponification value high.



2. Expression Method of Grape Seed Oil Extraction Machine
Squeeze the grape to get grape seed without grape peel. And then broke the grape seed after removing impurity. Soften the seed and then put that into oil press for pressing, finally getting the crude oil. Oil expression method is simple, easy for industry production without chemical pollution and easy separation. But at the same time, expression method also exist some questions such as low oil yield, high residual oil content, energy consumption, etc.



3. Overcritical CO2 extraction method of Grape Seed Oil Extraction Machine
After drying, crushing grape seeds go into the extraction kettle.Press Carbon dioxide by high-pressure pump,passing through the heat exchanger heating, making it both the diffusivity of a gas and the liquid density supercritical fluid. The fluid goes through the extraction kettle after leaching grape seed oil, into the separation column, after decompression, warming the grape seed oil and carbon dioxide separation. Overcritical CO2 extraction method features: low temperature operation; Avoiding the oxidation of unsaturated fatty acid decomposition; High oil extraction rate. Overcritical CO2 extraction is a new extraction technology developed in recent years. In food, medicine, chemical industry and other fields the method has been widely used.



The three above making oil methods can only get crude oil. If we want to get edible oil, the crude oil needs oil refining process. At present, the general use of grape seed oil refining process after Grape Seed Oil Extraction Machine processing is as follows: Degumming, alkali refining, washing, drying, decoloring, deodorization, finally getting the edible oil.
http://www.oil-extraction-machine.org/

How do we engage in EDIBLE OIL REFINING PLANT industry? Edible oil refining plant can bring us many chances abd surprise.

1. Learn more about the Edible oil refining plant business
You will need to conduct extensive research on what a Edible oil refining plant business requires in terms of capital, competition, market size and trends, and other insights on the business.

2. Craft your Edible oil refining plant business plan
Having a business plan before plunging into a new business is like having a compass before setting out on a voyage; it gives you insight on everything you will need to set up and run the business successfully.

3. Decide on your source of raw materials
You have two options for obtaining the raw materials needed for vegetable oil extraction. You can either buy the plants from a supplier or have your own farm for cultivating the plants (olive oil, groundnuts, coconuts, etc).
If you are planning to start small Edible oil refining plant quickly, you will want to buy the raw material from a supplier. However, the second option (that is, having your own farm) is better and more economical, but it is more expensive; and setting up the farm takes time.

4. Find a good location for Edible oil refining plant business

The location of your business is another very important factor that can make or break it. It is best to locate it close to your source of raw materials.

5. Get the funds for Edible oil refining plant business
If you have all the required capital to yourself, that’s fine. But if you would need funds from other sources, start approaching those sources with your business plan. If your business plan presents your business as a very promising and lucrative one, you would easily attract investors or get loans from banks or other lending institutions.

6. Get the Edible oil refining plant
The most important of all the equipment you will need is the extracting machine. The cost of this machine depends on the model and the tasks it can perform. For example, the D-1688 costs between $3,000 to $5,000. Other equipment you will need include large storage containers and instruments for cleaning and packaging.

7. Hire employees for Edible oil refining plant business
Using various media, you will need to advertise vacancies for employees in the oil extraction process, and select the best employees to work with you.

8. Market and launch your Edible oil refining plant business
It is important that you market your business through a wide range of effective media. You can start by visit businesses that fall within your target group, such as restaurants and manufacturing industries. Also, you can approach retailers and entice them with attractive discounts.
Above tips are very important for you firstly start your edible oil production business.
http://www.edible-oil-refining-plant.com/

How do we treat OIL EXTRACTION MACHINE problems in daily operation?

Get the Oil extraction machine
The most important of all the equipment you will need is the extracting machine. The cost of this machine depends on the model and the tasks it can perform. For example, the D-1688 costs between $3,000 to $5,000. Other equipment you will need include large storage containers and instruments for cleaning and packaging.


Hire employees for Oil extraction machine business
Using various media, you will need to advertise vacancies for employees in the oil extraction process, and select the best employees to work with you.

Market and launch your Oil extraction machine business
It is important that you market your business through a wide range of effective media. You can start by visit businesses that fall within your target group, such as restaurants and manufacturing industries. Also, you can approach retailers and entice them with attractive discounts.
Above tips are very important for you firstly start your edible oil production business.

Oil extraction machine needs installation debugging when it is just put into production. During this period, it may need disassembling. So we should be very careful. If we don’t pay attention to these details in oil extraction machine dismantling, it may be harmful to the oil extraction machine.

The following are the points which we should pay attention to in oil extraction machine dismantling:

1. We need the most suitable tools for oil extraction machine dismantling. Don’t hit or knock heavily to prevent the parts to be broken or be out of shape.

2. Clear the surface soil or greasy dirt before disassembling. Keep clean during oil extraction machine dismantling.

3. After disassembling, classify and store the parts according to material nature and parts precision measure.

4. Disassemble the oil extraction machine according to needs. Try to disassemble the oil extraction machine as less as possible, and don’t disassemble the equipment if there has no needs.

5. Prepare enough for assembling of the oil extraction machine when disassembling it. Notice to check the signs when we disassemble the equipment so as to improve its efficiency and accuracy.

6. Disassemble the oil extraction machine by sequence. Usually we dismantle the machine from accessories to master parts, from outer to inner, from the whole machine to assemble and finally to each part of oil extraction machine.
http://www.oil-extraction-machine.org

EDIBLE OIL REFINING PLANT market is attracting more and more atentions for its project profit and wide application.


Edible Oil Refining Plant Marketdemand is always a focused topic by oil processing equipment manufacturers, including us. With the development of economy and technology, the nutritional value of oil is attached more and more people's attention. While for a long time, Edible Oil Refining Plant can only produce rough texture oil which is too bitter to swallow. Recently the researchers use biological engineering technology to produce out refined oil retaining the nutrients and fragrance and delicate taste, also having the characteristics such as chewiness, smooth. The flour product can make noodles, dumplings, bread and other "golden color” food, known as "the third largest staple food in 21st century.

According to expert analysis and prediction, in recent future, this product has great development potential in China market, and the market prospect is broad. Meanwhile, the technological innovation, product innovation and applications innovation of oil deep processing of refined oil will further broaden the starch market, and promote oil processing industry into a new development period. Refined oil flour industry is facing a good opportunities for development and broad market prospects.

The Edible Oil Refining Plant Market Demand is still huge, and obviously this situation will last for a long time. Due to the technology innovation, the Edible Oil Refining Plant Market Demand will gradually appear two trends: large-scale and professionalization. This is good for not only oil processing factory and enterprise, but the Edible Oil Refining Plant Market and manufacturers. The manufacturers can make full use of their merits for higher progress in this field.

And for the Edible Oil Refining Plant Market purchaser, they can find the most professional manufacturer of their wanted equipment. The manufacturer will provide them with best quality product and after sale service because of the intense market competition, which can promote the whole industry progress. The Edible Oil Refining Plant Market Demand is in a good condition and this is a good time to invest for Edible Oil Refining Plant Market.
http://www.edible-oil-refining-plant.com

Vegetable EDIBLE OIL REFINING PLANT Information Sharing :


Edible Oil Refining Plant uses physical or chemical method to remove impurities from the extracted crude oil, such as FFA, wax, gum, etc..


Two method of the Edible Oil Refining Plant method Physical refining means removing free fatty acid using wet distillation. It has the following features: 1.Less oil loss and product have high stability; 2.More suitable for oil with high acid value and low gum impurity; 3.More FFA is distilled out; 4.No wastewater in the process of water washing. Chemical refining Chemical refining means removing FFA in a chemical way(acid-base neutralization). Features of the chemical refining: 1.Excellent adaptability and less requirements to oil quality; 2.Niger have strong adsorptivity, and it have de-acidify, de-gum and de-impurity function together; 3.High quality of product; 4.Less clay is added into compared with physical refining.


Edible Oil Refining Plant Featrues:
1. Reasonable combination of various technology in Edible Oil Refining Plant, well-made equipment and high standard requirements of products can provide a perfect service for you. 2. Advanced technology of the refinery project, excellent equipment, automatic control and excellent technical and economic indicators can meet different refining requirements of customers both at home and abroad. 3. Adopting all kinds of heat exchangers greatly saves energy consumption. 4. Adopting soft column deodorization tower, steam consumption is greatly saved.
http://www.edible-oil-refining-plant.com

What should we abide by in EDIBLE OIL REFINING PLANT operation?


Only abiding by the SUNFLOWER Edible oil refining plant USAGE RULES, can we ensure its normal running. With social development, people pay more and more attention to food nutrition. Grain food, as one of the healthy food, contains lots of nutrition. And with oil consumption increasing, the market also keeps a watchful eye on sunflower seed oil solvent extraction machine. Each sunflower seed oil solvent extraction machine has its own usage rules.


1. When the squeezing quantity is low, and solvent extraction technology and yield is abnormal, we should draw out the squeeze shaft and check the cage bar and the spiral shell abrasion circumstances. The Edible oil refining plant wearing parts should be changed in time. Each lubrication part should prevent dust and other impurities intrusion. Each year we should check the engine oil quality of the reducer casing. If it goes bad, we should change all of the engine oil. This is quite important in sunflower seed oil solvent extraction machine usage rules.


2. We should establish the criterion of “Goods Quality Is the First”for sunflower Edible oil refining plant usage rules. No quality, no market value. No quality, no market. No quality, no profit. No quality, no life. Therefore, try to ensure quality, yield, safety and low energy consumption. Try to improve extraction rate and yield rate on the base of good quality.


3. We should abide by the norm of “Old Machine, New Operation”. If the Edible oil refining plant is not advanced enough, we can still make it perform maximum efficiency by correct operation according to sunflower seed oil solvent extraction machine usage rules.


4. Operate the sunflower Edible oil refining plant and strictly abide by the sunflower seed oil solvent extraction machine usage rules. Do well in safety protection and maintenance. Strictly operate abiding by the rules to prevent error.


The season of harvesting sunflower seed is coming. And it is also the good opportunity for sunflower Edible oil refining plant sales. We hope that by the above analysis, you can improve sunflower Edible oil refining plant running efficiency in operation and abide by sunflower seed oil solvent extraction machine usage value.
http://www.edible-oil-refining-plant.com

RICE MILLING MACHINE Safety Signal Labels
After we Buying a Rice Milling Machine, we’ll find some safety signal labels on the machine, which teaches rice milling users what should notice or warn when operating the machine. Next is some common rice milling machine safety signal labels on the machine.

A. Rice Milling Machine Safety Signal Labels -Warning: Please read carefully the Using Guidance before start.

B. Rice Milling Machine Safety Signal Labels -Danger: Please do not open or remove the machine belt system cover when the machine is running. Please do not get close to the machine or put hands in the running machine.
C. Rice Milling Machine Safety Signal Labels -Warning: When the machine is running, to avoid finger cutting or hand danger, please do not put your hands into the milling materials entrance or grinding materials entrance.
D. Notice: When the machine is running, please do not open or remove the machine cover.
E. Rice Milling Machine Safety Signal Labels Notice:
1- People can be hurt if touching the running system of the machine.
2- Please make sure the belt system cover was well installed before machine starting.
3-The machine must be stopped in case under the below 3 situations:
3.1- There is nobody eyes on the machine.
3.2- The machine cover is opened.
3.3- When the Rice Milling Machine is under cleaning, adjusting, repairing and oiling.
F. Stay away from the running machine with a safe distance.
G. Please use Safety goggles and ear muffs when using the machine.
H. Please set the rice milling machine on plain ground.
Operate rice milling machine according the signal labels and reduce accidental injury during rice milling process. If you have any problem about rice milling machine operation, pls feel free to contact us.
http://www.rice-milling-machine.org/

How Does Large CORN THRESHING MACHINE Work?

Large Corn Threshing Machine:
Full-automatic corn threshing machine doesn’t need manual feeding. There has a mixing device in the front of the machine.

Large Corn Threshing Machine Application Range:
It is suitable for the place where has large planting area of corn. It realizes automatic feeding and can save both time and labor.

Large Corn Threshing Machine Main Structure:
Gathering unit: it can gather the corncobs.
Transmission unit: it can convey the corncobs to the separation device.
Threshing unit: it threshes the corncobs.
Separation and cleaning unit: the mesh screen cleaning device can separate the corn kernels and corncobs. The air draft device can remove the light kernels.
Auxiliary device: this includes disconnecting device, transmission gear, safety device and so on.

Large Corn Threshing Machine Technical parameter:
Power: 15-28 horsepower diesel engine.
Spindle speed: ≥1000-1100(r/min)
Operating type: four wagons
Productivity: ≥5t/hour

Large Corn Threshing Machine After-Sales Service:

1. Large Corn Threshing Machine Technical Consultation:

If you have problems when using our machine, please read the instructions first.
If you can’t solve the problem, then don’t hesitate to contact us. Our engineer will provide customized technical support for you.

2. Large Corn Threshing Machine Maintenance:

We would supply you with the maintenance guide in the instruction.
Please keep in mind that you should also do the related necessary work before and after each time of operation. Considerate maintenance brings you the longer service life of your machine.

3. Large Corn Threshing Machine One-Year Quality Guarantee:

The machine has one-year quality guarantee. During the guarantee period, if the main body is defective as the bad quality without any workers’ wrong operation, we should replace the parts for free.

http://www.corn-thresher.com
ugoodmach@gmail.com

Why Do We Choose Square Opening CORN THRESHING MACHINE?

Square Opening Corn Threshing Machine has larger processing capacity and high yield. Square Opening Corn Threshing Machine has air blower, which can separate the impurities from corn. It also has high shelling efficiency.

Square Opening Corn Threshing Machine Technical Parameter:

Motor: 2.2-3kw

Yield: 2-3t/h

Broken rate: ＜2%

Impurities Removing Rate: ＞98%

Power Source: single-phase source

3 shafts and 36 hammers



Square Opening Corn Threshing Machine Advantages:

High shelling efficiency

No broken corncob

No broken corn kernels

With air blower for cleaning

Square opening design as an organic whole with the machine


Meantime, we should notice corn threshing machine safety operation:
1. Before corn Corn Threshing Machine working, check whether the turning parts are flexible without bump, and ensure there has no impurities in the machine and lubrication oil is enough.

2. Prohibit children playing around the machine.

3. Corn Threshing Machine safety operation attention four: during corn shelling machine working, feed corncobs evenly and guard against stones, crabstick or other hard matter mixing into the machine.

4. Corn Threshing Machine safety operation attention five: the junction of the transmission belt should be firm enough. Prohibit any object contacting the transmission part.

5. The transmission ratio between the supporting drive and the corn shelling machine should accord with the requirements so as to avoid fierce vibration due to high revolving speed of the corn shelling machine and personal damage due to parts damagement or fastener loosening.

6. Don’t make the corn shelling machine work for over 8 hours. After each time of working, we should halt the machine and check, adjust and lubricate it.

7. Corn Threshing Machine adopts diesel engine as drive, so we can put a flameproof enclosure on the exhaust pipe to avoid fire hazard.
http://www.corn-thresher.com
ugoodmach@gmail.com

How Does Household Hammer Type CORN SHELLING MACHINE Work?

Household Hammer Type Corn Shelling Machine

The hammer type Corn Shelling Machine has flexible hammers. The material adopts wear-resisting ball-milling cast steel hammer. It has air blower and vibrating screen. The high-speed rotation makes corn kernels and corncob separated. It has the features of high yield and high threshing ratio and has no broken corncob.

Hammer Type Corn Shelling Machine Technical Parameter:
Weight: 30kg
Total Loss Ratio: 1%
Feeding Quantity: 2 Ton/Hour
Power: 2.2-3.0 KW
Power: 220V
Motor Speed: 2800 Turns/Hour
Power Type: Power Driven



Corn Shelling Machine After-Sales Service:

1. Corn Shelling Machine Technical Consultation:

If you have problems when using our machine, please read the instructions first.
If you can’t solve the problem, then don’t hesitate to contact us. Our engineer will provide customized technical support for you.

2. Corn Shelling Machine Maintenance:

We would supply you with the maintenance guide in the instruction.
Please keep in mind that you should also do the related necessary work before and after each time of operation. Considerate maintenance brings you the longer service life of your machine.

3. Corn Shelling Machine One-Year Quality Guarantee:

The Corn Shelling Machine has one-year quality guarantee. During the guarantee period, if the main body is defective as the bad quality without any workers’ wrong operation, we should replace the parts for free.
http://www.corn-thresher.com
ugoodmach@gmail.com

Why do we choose push type SEEDING MACHINE?

The seeding Machine is suitable for various grains seeding and fertilizing, such as corn, wheat, soybean, peanut, mung bean, other beans and cereals. It is driven by manpower, no need of electricity or oil, energy saving, convenient and highly efficient. It can propel plants to grow.

This seeding machine can sow fertilizer and seeds into the soil automatically and equally in plant distance. After sowing, it can also cover the soil automatically. It is quite popular by more and more peasants.

Seeding Machine Types:
UGS-S1C single-bin chain:
UGS-S2C double-bin chain,
UGS-S2T double-bin transmission
UGS-S4C four-bin chain
UGS-FS fine /accurate sowing.
UGS-TTM millet sowing
Please see details in the table below.
Size:1.1*0.74*0.9m
Deep tillage: 60 mm
Weight: 9-15kg

Seeding Machine Advantages:
1. It can sow seeds and fertilizer.
2. It can adjust the row spacing and seeds sowing quantity.
3. We can choose the suitable type （sowing bin and row）according to our needs.

Meanwhile, the push type seeding machine has After-Sales Service as follows:

1. Technical Consultation:

If you have problems when using our machine, please read the instructions first.
If you can’t solve the problem, then don’t hesitate to contact us. Our engineer will provide customized technical support for you.

2. Maintenance:

We would supply you with the maintenance guide in the instruction.
Please keep in mind that you should also do the related necessary work before and after each time of operation. Considerate maintenance brings you the longer service life of your machine.

3. One-Year Quality Guarantee:

The machine has one-year quality guarantee. During the guarantee period, if the main body is defective as the bad quality without any workers’ wrong operation, we should replace the parts for free.
http://www.corn-thresher.com/seeding-machine/
ugoodmach@gmail.com

What can PUSH SEED PLANTER do for us? Why is it called push seed planter?

Push Seed Planter Function:
The Push Seed Planter is suitable for various grains seeding, such as corn, soybean, peanut, mung bean and so on. It is driven by manpower, no need of electricity or oil, energy saving, convenient and highly efficient. It can propel plants to grow.

Push Seed Planter Types:
single-bin chain, double-bin chain, double-bin transmission, four-bin chain, four-bin transmission, fine sowing. Please see the below table for reference.

Push Seed Planter Advantages:
1. Push Seed Planter can sow seeds and fertilize the soil.
2. Push Seed Planter can adjust the row spacing and seeds sowing quantity.
3. We can choose the suitable type （sowing bin and row）according to our needs.

Push Seed Planter Note:
Adjust the seeding rate of the inside sowing wheel by screwing the iron butterfly mother and adjust the sowing rate of the outside sowing wheel by screwing the plastic butterfly mother. Screw clockwise to reduce the sowing rate and screw anti-clockwise to increase the sowing rate.

http://www.corn-thresher.com/push-seed-planter/
ugoodmach@gmail.com

How many methods are there in CORN THRESHING MACHINE rust protection?

When we operate the corn threshing machine for a long time, corn threshing machine may have lots of dust or impurities, which can affect the machine’s normal running. So the corn threshing machine rust protection work and maintenance is quite important.

First, we can take down the corn threshing machine triangular belt, clean the oil contamination and the muddiness. Don’t let it contact alkaline matter, but put it alone.

Second, we can open the new corn threshing machine layer upon layer, check each part, clean the inner impurities and dust and ensure the machine’s normal working.

Corn threshing machine needs regular maintenance and rust protection work. This can directly affect corn threshing machine service life and performance. Most of the agricultural machines are made of iron.

When we don’t use the corn threshing machine or other agricultural machines, we should clean it, coat the antirust paint and put it in the dry and ventilated place. For the wheel harvester and tractor storage, we can use plancon to pad under the machine and make its tire leave from the floor and protect moderate air pressure. Besides, the corn threshing machine storage position may also make the spring lose elasticity so as to cause plastic transformation.
http://www.corn-thresher.com
ugoodmach@gmail.com

Corn and Beans SEEDING MACHINE for Sale

Seeding Machine function:
The seeding Machine is suitable for various grains seeding, such as corn, soybean, peanut, mung bean and so on. It is driven by manpower, no need of electricity or oil, energy saving, convenient and highly efficient. It can propel plants to grow.

Seeding Machine Types:
single-bin chain, double-bin chain, double-bin transmission, four-bin chain, four-bin transmission, fine sowing. Please see the below table for reference.

Seeding Machine Advantages:
1. It can sow seeds and fertilize the soil.
2. It can adjust the row spacing and seeds sowing quantity.
3. We can choose the suitable type （sowing bin and row）according to our needs.

Note about Seeding Machine:
Adjust the seeding rate of the inside sowing wheel by screwing the iron butterfly mother and adjust the sowing rate of the outside sowing wheel by screwing the plastic butterfly mother. Screw clockwise to reduce the sowing rate and screw anti-clockwise to increase the sowing rate.

Row spacing adjustment of the Seeding Machine:
We can replace the sowing wheel if the factory settings cannot meet our requirements.


Quantity of the Seeding Machine Rows（row means the leg of the seeding machine）: one ; But Millet seeding machine has two rows, or two legs.

Seeds Capacity in the Seeding Machine Hopper: about 10kg
http://www.corn-thresher.com/seeding-machine/
ugoodmach@gmail.com

All-in-one CORN THRESHING MACHINE is our newly designed product in 2015. It has the air draft pipe which can draw the corn husk out.

Corn Threshing Machine has one motor and doesn’t need of rotor replacing, saving both time and labor.

Corn Threshing Machine working methods:
It has the up-down structure. The upper part has husking function and the lower part has threshing function.

Because the corn is a little wet after being husked, the machine should not husk and thresh at the same time. After husking, we should replace the belt and then thresh the corn. The air draft pipe and the threshing part work simultaneously, which can ensure better husking effect.

Corn Threshing Machine Technical parameter:
Corn Threshing Machine Husking yield：0.25-0.33 acres
Corn Threshing Machine Threshing yield：2t
Corn Threshing Machine Weight：85kg
Corn Threshing Machine Power：3KW
Corn Threshing Machine Power supply：220V
Corn Threshing Machine Husking rate：98% above
Corn Threshing Machine Seeds damage rate: less than 2%



Corn Threshing Machine After-Sales Service:

1. Technical Consultation:

If you have problems when using our machine, please read the instructions first.
If you can’t solve the problem, then don’t hesitate to contact us. Our engineer will provide customized technical support for you.

2. Maintenance:

We would supply you with the maintenance guide in the instruction.
Please keep in mind that you should also do the related necessary work before and after each time of operation. Considerate maintenance brings you the longer service life of your machine.

3. Corn Threshing Machine One-Year Quality Guarantee:

The machine has one-year quality guarantee. During the guarantee period, if the main body is defective as the bad quality without any workers’ wrong operation, we should replace the parts for free.
http://www.corn-thresher.com
ugoodmach@gmail.com

What does a row mean for SEEDING MACHINE? We usually listen to one row seeding machine, or two row seeding machine. But do you know its meaning? Row here means leg of the seeding machine. Most of the seeds sowing can use one row seeding machine, except millet, sorghum and other small size seeds. And bin means hopper which can carry different seeds.

The seeding Machine is suitable for various grains seeding, such as corn, soybean, peanut, mung bean and so on. It is driven by manpower, no need of electricity or oil, energy saving, convenient and highly efficient. It can propel plants to grow.

Seeding Machine Types:
single-bin chain, double-bin chain, double-bin transmission, four-bin chain, four-bin transmission, fine sowing. Please see the below table for reference.

Seeding Machine Advantages:
1. It can sow seeds and fertilize the soil.
2. It can adjust the row spacing and seeds sowing quantity.
3. We can choose the suitable type （sowing bin and row）according to our needs.

Millet seeding machine is different from the corn planting machine, which I posted before. Millet sowing machine has two rows and two hoppers in seeding. While corn, peanut and beans planting machine only has one row.
http://www.corn-thresher.com/seeding-machine/
ugoodmach@gmail.com

How do we operate small SEEDING MACHINE?

It is easy to operate and maintain the small hand type seeding machine. First, The seeding Machine is suitable for various grains seeding, such as corn, soybean, peanut, mung bean and so on. It is driven by manpower, no need of electricity or oil, energy saving, convenient and highly efficient. It can propel plants to grow.

Seeding Machine Types:
single-bin chain, double-bin chain, double-bin transmission, four-bin chain, four-bin transmission, fine sowing. Please see the below table for reference.

Seeding Machine Advantages:
It can sow seeds and fertilize the soil. It can adjust the row spacing and seeds sowing quantity.

We can choose the suitable sowing bin or sowing wheel according to our needs. Adjust the seeding rate of the inside sowing wheel by screwing the iron butterfly mother and adjust the sowing rate of the outside sowing wheel by screwing the plastic butterfly mother. Screw clockwise to reduce the sowing rate and screw anti-clockwise to increase the sowing rate.

Row spacing adjustment of the Seeding Machine:
We can replace the sowing wheel if the factory settings cannot meet our requirements.

Quantity of the Seeding Machine Rows（row means the leg of the seeding machine）: one ; But Millet seeding machine has two rows, or two legs. Seeds Capacity in the Hopper: 10kg
http://www.corn-thresher.com/seeding-machine/
ugoodmach@gmail.com

Extended Swing Hammer Type CORN THRESHER Introduction:

The swing hammer type corn thresher has 36 flexible hammers. It has the same structure with the threshing part of the corn husking and threshing machine.

Swing hammer type corn thresher technical parameter:
Weight: 42kg
Motive power: 3kw
Yield: 2500kg/h
Length of the frame: 77cm

Corn Thresher After-Sales Service:

1. Corn Thresher Technical Consultation:

If you have problems when using our machine, please read the instructions first.
If you can’t solve the problem, then don’t hesitate to contact us. Our engineer will provide customized technical support for you.

2. Corn Thresher Maintenance:

We would supply you with the maintenance guide in the instruction.
Please keep in mind that you should also do the related necessary work before and after each time of operation. Considerate maintenance brings you the longer service life of your machine.

3. Corn Thresher One-Year Quality Guarantee:

The machine has one-year quality guarantee. During the guarantee period, if the main body is defective as the bad quality without any workers’ wrong operation, we should replace the parts for free.
http://www.corn-thresher.com
ugoodmach@gmail.com