₦airaland Forum

1 Month Certified RF/Transmission Engineering Training


RF Engineering

More and more people want to remain mobile while still connected to network resources. A typical example here is the wireless connection between our mobile phones and operators’ Base Stations. This concept of wireless (RF) is very wide and is covered under our RF Engineering training.

From scenarios as simple as connecting LANs in two offices together using radios and antennas in a LOS, Point to Point architecture; to complex scenarios of connecting thousands of handsets to a Base Station without cables (NLOS, PmPt), RF principles are basically the same and are covered under this course. These same principles can be applied in various formats, at different frequencies or manipulated to give birth to new standards. You will learn to configure Base Stations for Non Line of Site (NLOS) operations with Customer Premise Equipment (CPEs); you will learn to configure Radios for Point to Point communication, say between a branch office and its head office; you will learn to Design such RF networks, before implementation.

At the end of the training, you would have covered the curriculum for the Certified Wireless Network Administrator, CWNA, and be qualified to write the certification exam.

Starting Monday-feb 29-2016

Course outline for Transmission Engineering

VSAT: Installation & Configuration leading to CSI
• Theory of Satellite Communication, Assembling of VSAT Hardware from LNA, Feedhorn, BUC, etc. Installing VSAT: Setting Azimuth, Elevation Using Compass & Inclinometer. Terminating & Connecting the Feeder Cables. Entering & Configuring the Modem, Tracking the Satellite. Commissioning the VSAT.

Introduction for Optical Fibre
• Couplers, Connectors. Multi-mode, single-mode, Pigtails, Patch Cords, etc. Demonstration of Use of Fibre Toolkit, Media Converter, etc. Implementation of Fibre Optics for LANs.

VoIP & VPN Design and Configuration
• Installation & Configuration of VoIP Gateways. Assigning Telephone Nos to Phones. Demonstration of Calls on Wired Network. Concepts, Protocols & Implementation of VPNs.

Installing MW Radios, PDH, SDH Links


Introduction to GSM Engineering
• GSM Radio & Switches. GSM Fundamentals. Introduction to GPRS, UMTS, etc. Upgrade of 2G to 2.5G to 3G & 4GLTE Networks.

RF Planning & Implementation leading to CWNA
• RF Planning using Modelling Tools Software, RF Site Survery. Installing & Connecting Antennas for 2.4GHz RF. Entering & Navigating Radios. Basic Radio Configuration.

ISP Base Station Configuration
• Base Station Hardware Installation, Installing Network Software, Configuring IP Settings.

.WIMAX Network Configuring 2.4 & 5GHZ Radios for Power Station 5
• Configuring VLANs. Configuring Base, Station as Access Point, Wireless, Bridge, Repeater, WDS. Configuring, Security. Configuring Firewall & NAT., Configuring WAN Parameters.

90% practicals,ON-SITE Training.

Contact Us at Keltech-Communications,1 Adekunle Araba Street,off chemist b/s,Okota Isolo lagos.
+234-8033052996,08067779880.

aa Foundation an international NGO, partners with KELTECH to train youths for placement with IT/TELECOM companies. Past trainees of this program were deployed as interns to over 10 companies including. Direct-on-pc, Skylink, Simbanet, Dhamac Resources Interwireless.etc
Our interns enjoy over 75% retension, with over 30% of accepting companies requesting for more interns.
Other Interns have been able to gain employment on their own merit to companies like Zoom-Mobile,
Teltok, Ericsson, Huawei, swift Broadband Network, Glo, MTN, Etisalat, Airtel-NG. etc

The 4-months practical Diploma in Telecom training

Network Management leading to N+, Server+, MCTS
• Structured Cabling, Setting up a LAN, TCP/IP Configuration, Domain & Workgroup Configuration, Creating & Managing User Accounts On 2012 Server O S, joining windows 10 to Server 2012 Domain, Sharing Internet and other Resources.

Security Solutions & Application leading to Security +: Security Policies. Account Policies. Auditing. Firewalls Implementation, Account lockout policy settings Securing your New and Existing Wired-LAN & WLAN Network

Internetworking & Router Configuration leading to CCNA : Full Cisco Academy curriculum & Router Configuration leading to 200-120 Certification. Practical exposure with live Cisco routers, switches; exam success, guaranteed!

Linux: Installation & Administration leading to Linux+

Cloud Computing :Setting-up cloud Servers, Installing cloud softwares to manage your organizational Data-base.

Virtualization : Configuring Hyper-V on your Exchange Server and running multiple virtual machines on each physical machine.

Transmission Engineering : VSAT: Installation & Configuration leading to CSI: Assemblying of VSAT Hardware from LNB, Feedhorn, BUC, etc. Installing VSAT: Setting Azimuth, Elevation Using Compass & Inclinometer. Terminating & Connecting the Feeder Cables. Entering & Configuring the Modem, Tracking the Satellite. Commissioning the VSAT.

Optical Fibre :Couplers, Connectors. Multi-mode, single-mode, Pigtails, Patch Cords, etc. Demonstration of Use of Fibre Toolkit, Media Converter, live fibre cable Termination etc. Implementation of Fibre Optics for LANs.

VoIP & VPN Design and Configuration: Installation & Configuration of VoIP Gateways. Assigning Telephone Nos to Phones. Demonstration of Calls on Wired And Wireless Network. Configuring IP- TELEPHONY,

VPN-Setting-up Virtual private Network ,Configuring Site to Site Virtual networks over the Internet, Implementing Remote access Vpn Connection Using 2012 server on the Public Internet Network.

RF Network & Implementation leading to CWNA: RF Site Survey. Installing & Connecting Antennas for 5GHz & 2.4GHz RF. Entering & Navigating Radios. Basic Radio Configuration. ISP Base Station Configuration: Base Station Hardware Installation. Installing Network Software. Configuring IP Settings. Configuring VLANs. Configuring Base Station as Access Point, Wireless Bridge, Repeater, WDS. Configuring Security. Configuring Firewall & NAT. Configuring WAN Parameters.

WiMAX Core Network Engineering: WiMAX is an IP based 802.16 Standard, wireless broadband access technology that provides performance similar to 802.11/Wi-Fi networks.

Microwave Transmission Network: Installing PDH MW Radios ,Setting los link, Commissioning with Mini-link craft, installing both ODU & IDU,SDH MW link and STM 1 Network Integration. RF

Optimization Training:
Problem Analysis
* Analyzing performance reports and statistics for the worst performing BSCs and/or Sites
* Viewing Site performance Trends Reports
* Analyzing previous drive test data

Checks Prior to Action
* Cluster definitions by investigating BSC
borders, main cities, freeways, major roads
* Investigating customer distribution, customer
habits (voice/data usage)
* Running traces on Network to identify problem

Drive Testing
* Preparing Action Plan, defining drive test route
* Collecting RSSI Log files
* Re-driving questionable data
* Non-working sites/sectors or TRXs,
* Inactive Radio network features like frequency hopping, disabled GPRS
* Overshooting sites coverage overlaps
* Coverage holes

After the Test
* Post processing of data Plotting RX Level and Quality Information for overall picture of the driven area
* Initial Discussions on drive test
* Reporting urgent problems for action

GSM Engineering: GSM Radio & Switches. GSM Fundamentals. Introduction to GPRS, UMTS, etc. Upgrade of 2G to 2.5G to 3G & 4G LTE Network
• Site Location
• Calling IN
• Opening equipment boxes
• Perform Equipment check
• Quality check
• Cabinet Coupling
• Marking the footprint
• Install the RC Outdoor cabinet
• Stack the BC 8910 Outdoor cabinet
• BTS Cables Termination
• Types of cables
• Fiber cables, E1 cables, Alarm cables, jumper cables and grounding cables
• Cable Termination
• Connection of fiber cables from the FS cards to the Tx and Rx ports of the RSU
• Connection of the E1 cable from the LPU card to the DDF
• Connection of the jumper cables to the ANT ports of the RSUs
• Cable color codes
• Cable color codes for Indoor and Outdoor E1 connection
• Performing loop-test
• Shutting the existing RBS cabinet
• Transferring and Connection of the MW PDH Radio to the BC cabinet
• Cross-patching
• Connection of Alarm cables to the Hybrid System
• Connection of Diplexers so as to combine GSM and DCS frequencies
• Connection of Jumper cables to feeder cables using Feeder connector

Overview of Radio & Switching in WCDMA/CDMA OperationsNetwork elements of a GSM network like MS, BTS, Radio, PDH, SDH,BSC, and MSC will be analyzed with a view to understanding call setup and call completion processes. This will create a solid foundation for the practical sessions that will follow in NOC Management.

NOC Management:

GSM, CDMA, ISP operators networks are managed from rooms called NOC, where the entire networks are viewed on computers screens, and administered by Network Administrators. The network administrator plays a crucial role in monitoring the state of the network nodes such as BTS, BSC, VSAT and other Transmission Links.

Customer Service/Technical Support:

This course will familiarize you with fundamental issues that GSM, CDMA and ISP customers encounter, and subsequently position you to resolve such issues, via best practice troubleshooting processes.
The training is perfect for help desk technicians, hardware and software support engineers, and support professionals at all levels, as well as for new graduates looking to be employed this area.

All of this add-up your cv to become a Certified IT/Telecom Engineer.


FACTS OF THE TRAINING

INTERNSHIP OPPORTUNITIES

INDUSTRY RECOGNIZED CERTIFICATE

TRAINING IS PRACTICAL WITH FIELD TRIP

TRAINING OFFERS OPPORTUNITIES TO JOIN TELECOM CONTRACTORS
Contact Us at Keltech Communications, 1 Adekunle Araba Street,off Chemist B/S Okota Isolo lagos.

+234-8033052996,08067779880.
www.keltechcommunications.com

RNPO TRAINING & OPTIMIZATION
As part of efforts to continually maintain quality of service, GSM/CDMA operators are regularly monitoring and optimizing fluctuating RF parameters on their network, creating internship, employment, and contracting opportunities for persons knowledgeable in RF Optimization tehniques.
Starting Monday-22 Feb-2016

This RF Optimization training will prepare you for such opportunities. Training is mostly outdoor based, and covers:

Introduction: Radio Network Planning and Optimization Overview

Module1: Radio Network Planning
* Basic Importance and scope of planning in a cellular radio network,
* Two Major planning schemes Abducted in a cellular radio network building project
* Requirements for preparing A Nominal planning scheme for A:Business Plan, Coverage Plan, Capacity Plan, Frequency Plan, Parameter Plan,

Module 2:Radio Network Optimization Engineering
* Cluster definitions by investigating BSC
borders, main cities, freeways, major roads,
* Investigating customer distribution, customer
habits (voice/data usage)
* Radio Network Counters and KPIs.

Module 3: Radio Network Drive Test Analysis
* Preparing Action Plan, defining drive test route
* Collecting RSSI Log files, Procedures for preparing Drive Test Report or Analysis for Acceptance for both 2G and 3G Network, Export of LOG File from Tems into Mapinfo
* Understanding Tems Investigation Soft Functions

Module 4: Subjects to Investigate
* Non-working sites/sectors or TRXs,
* Inactive Radio network features like frequency hopping, disabled GPRS
* Overshooting sites coverage overlaps
* Coverage holes

After the Test
* Post processing of data Plotting RX Level and Quality Information for overall picture of the driven area
* Initial Discussions on drive test
* Reporting urgent problems for action

Contact Us at Keltech Communications
1 Adekunle Araba street,off chemist b/s okota isolo lagos
234-8067779880,08033052996

1 Month Certified RF/Transmission Engineering Training


RF Engineering

More and more people want to remain mobile while still connected to network resources. A typical example here is the wireless connection between our mobile phones and operators’ Base Stations. This concept of wireless (RF) is very wide and is covered under our RF Engineering training.

From scenarios as simple as connecting LANs in two offices together using radios and antennas in a LOS, Point to Point architecture; to complex scenarios of connecting thousands of handsets to a Base Station without cables (NLOS, PmPt), RF principles are basically the same and are covered under this course. These same principles can be applied in various formats, at different frequencies or manipulated to give birth to new standards. You will learn to configure Base Stations for Non Line of Site (NLOS) operations with Customer Premise Equipment (CPEs); you will learn to configure Radios for Point to Point communication, say between a branch office and its head office; you will learn to Design such RF networks, before implementation.

At the end of the training, you would have covered the curriculum for the Certified Wireless Network Administrator, CWNA, and be qualified to write the certification exam.

Starting Monday-feb 22-2016

Course outline for Transmission Engineering

VSAT: Installation & Configuration leading to CSI
• Theory of Satellite Communication, Assembling of VSAT Hardware from LNA, Feedhorn, BUC, etc. Installing VSAT: Setting Azimuth, Elevation Using Compass & Inclinometer. Terminating & Connecting the Feeder Cables. Entering & Configuring the Modem, Tracking the Satellite. Commissioning the VSAT.

Introduction for Optical Fibre
• Couplers, Connectors. Multi-mode, single-mode, Pigtails, Patch Cords, etc. Demonstration of Use of Fibre Toolkit, Media Converter, etc. Implementation of Fibre Optics for LANs.

VoIP & VPN Design and Configuration
• Installation & Configuration of VoIP Gateways. Assigning Telephone Nos to Phones. Demonstration of Calls on Wired Network. Concepts, Protocols & Implementation of VPNs.

Installing MW Radios, PDH, SDH Links


Introduction to GSM Engineering
• GSM Radio & Switches. GSM Fundamentals. Introduction to GPRS, UMTS, etc. Upgrade of 2G to 2.5G to 3G & 4GLTE Networks.

RF Planning & Implementation leading to CWNA
• RF Planning using Modelling Tools Software, RF Site Survery. Installing & Connecting Antennas for 2.4GHz RF. Entering & Navigating Radios. Basic Radio Configuration.

ISP Base Station Configuration
• Base Station Hardware Installation, Installing Network Software, Configuring IP Settings.

.WIMAX Network Configuring 2.4 & 5GHZ Radios for Power Station 5
• Configuring VLANs. Configuring Base, Station as Access Point, Wireless, Bridge, Repeater, WDS. Configuring, Security. Configuring Firewall & NAT., Configuring WAN Parameters.

90% practicals,ON-SITE Training.

You can also Enroll for our CCNP Training.

Contact Us at Keltech-Communications,1 Adekunle Araba Street,off chemist b/s,Okota Isolo lagos.
+234-8033052996.

1 Month Certified RF/Transmission Engineering Training


RF Engineering

More and more people want to remain mobile while still connected to network resources. A typical example here is the wireless connection between our mobile phones and operators’ Base Stations. This concept of wireless (RF) is very wide and is covered under our RF Engineering training.

From scenarios as simple as connecting LANs in two offices together using radios and antennas in a LOS, Point to Point architecture; to complex scenarios of connecting thousands of handsets to a Base Station without cables (NLOS, PmPt), RF principles are basically the same and are covered under this course. These same principles can be applied in various formats, at different frequencies or manipulated to give birth to new standards. You will learn to configure Base Stations for Non Line of Site (NLOS) operations with Customer Premise Equipment (CPEs); you will learn to configure Radios for Point to Point communication, say between a branch office and its head office; you will learn to Design such RF networks, before implementation.

At the end of the training, you would have covered the curriculum for the Certified Wireless Network Administrator, CWNA, and be qualified to write the certification exam.

Starting Monday-feb 22-2016

Course outline for Transmission Engineering

VSAT: Installation & Configuration leading to CSI
• Theory of Satellite Communication, Assembling of VSAT Hardware from LNA, Feedhorn, BUC, etc. Installing VSAT: Setting Azimuth, Elevation Using Compass & Inclinometer. Terminating & Connecting the Feeder Cables. Entering & Configuring the Modem, Tracking the Satellite. Commissioning the VSAT.

Introduction for Optical Fibre
• Couplers, Connectors. Multi-mode, single-mode, Pigtails, Patch Cords, etc. Demonstration of Use of Fibre Toolkit, Media Converter, etc. Implementation of Fibre Optics for LANs.

VoIP & VPN Design and Configuration
• Installation & Configuration of VoIP Gateways. Assigning Telephone Nos to Phones. Demonstration of Calls on Wired Network. Concepts, Protocols & Implementation of VPNs.

Installing MW Radios, PDH, SDH Links


Introduction to GSM Engineering
• GSM Radio & Switches. GSM Fundamentals. Introduction to GPRS, UMTS, etc. Upgrade of 2G to 2.5G to 3G & 4GLTE Networks.

RF Planning & Implementation leading to CWNA
• RF Planning using Modelling Tools Software, RF Site Survery. Installing & Connecting Antennas for 2.4GHz RF. Entering & Navigating Radios. Basic Radio Configuration.

ISP Base Station Configuration
• Base Station Hardware Installation, Installing Network Software, Configuring IP Settings.

.WIMAX Network Configuring 2.4 & 5GHZ Radios for Power Station 5
• Configuring VLANs. Configuring Base, Station as Access Point, Wireless, Bridge, Repeater, WDS. Configuring, Security. Configuring Firewall & NAT., Configuring WAN Parameters.

90% practicals,ON-SITE Training.

Contact Us at Keltech-Communications,1 Adekunle Araba Street,off chemist b/s,Okota Isolo lagos.
+234-8033052996

1 Month Certified RF/Transmission Engineering Training


RF Engineering

More and more people want to remain mobile while still connected to network resources. A typical example here is the wireless connection between our mobile phones and operators’ Base Stations. This concept of wireless (RF) is very wide and is covered under our RF Engineering training.

From scenarios as simple as connecting LANs in two offices together using radios and antennas in a LOS, Point to Point architecture; to complex scenarios of connecting thousands of handsets to a Base Station without cables (NLOS, PmPt), RF principles are basically the same and are covered under this course. These same principles can be applied in various formats, at different frequencies or manipulated to give birth to new standards. You will learn to configure Base Stations for Non Line of Site (NLOS) operations with Customer Premise Equipment (CPEs); you will learn to configure Radios for Point to Point communication, say between a branch office and its head office; you will learn to Design such RF networks, before implementation.

At the end of the training, you would have covered the curriculum for the Certified Wireless Network Administrator, CWNA, and be qualified to write the certification exam.

Starting Monday-feb 22-2016

Course outline for Transmission Engineering

VSAT: Installation & Configuration leading to CSI
• Theory of Satellite Communication, Assembling of VSAT Hardware from LNA, Feedhorn, BUC, etc. Installing VSAT: Setting Azimuth, Elevation Using Compass & Inclinometer. Terminating & Connecting the Feeder Cables. Entering & Configuring the Modem, Tracking the Satellite. Commissioning the VSAT.

Introduction for Optical Fibre
• Couplers, Connectors. Multi-mode, single-mode, Pigtails, Patch Cords, etc. Demonstration of Use of Fibre Toolkit, Media Converter, etc. Implementation of Fibre Optics for LANs.

VoIP & VPN Design and Configuration
• Installation & Configuration of VoIP Gateways. Assigning Telephone Nos to Phones. Demonstration of Calls on Wired Network. Concepts, Protocols & Implementation of VPNs.

Installing MW Radios, PDH, SDH Links


Introduction to GSM Engineering
• GSM Radio & Switches. GSM Fundamentals. Introduction to GPRS, UMTS, etc. Upgrade of 2G to 2.5G to 3G & 4GLTE Networks.

RF Planning & Implementation leading to CWNA
• RF Planning using Modelling Tools Software, RF Site Survery. Installing & Connecting Antennas for 2.4GHz RF. Entering & Navigating Radios. Basic Radio Configuration.

ISP Base Station Configuration
• Base Station Hardware Installation, Installing Network Software, Configuring IP Settings.

.WIMAX Network Configuring 2.4 & 5GHZ Radios for Power Station 5
• Configuring VLANs. Configuring Base, Station as Access Point, Wireless, Bridge, Repeater, WDS. Configuring, Security. Configuring Firewall & NAT., Configuring WAN Parameters.

90% practicals,ON-SITE Training.

Contact Us at Keltech-Communications,1 Adekunle Araba Street,off chemist b/s,Okota Isolo lagos.
+234-8033052996.

RADIO NETWORK PLANNING AND OPTIMIZATION & INTERNSHIP

As part of efforts to continually maintain quality of service, GSM/CDMA operators are regularly monitoring and optimizing fluctuating RF parameters on their network, creating internship, employment, and contracting opportunities for persons knowledgeable in RF Optimization tehniques.

This RF Optimization training will prepare you for such opportunities. Training is mostly outdoor based, and covers:

Introduction: Radio Network Planning and Optimization Overview

Module1: Radio Network Planning
* Basic Importance and scope of planning in a cellular radio network,
* Two Major planning schemes Abducted in a cellular radio network building project
* Requirements for preparing A Nominal planning scheme for A:Business Plan, Coverage Plan, Capacity Plan, Frequency Plan, Parameter Plan,

Module 2:Radio Network Optimization Engineering
* Cluster definitions by investigating BSC
borders, main cities, freeways, major roads,
* Investigating customer distribution, customer
habits (voice/data usage)
* Radio Network Counters and KPIs.

Module 3: Radio Network Drive Test Analysis
* Preparing Action Plan, defining drive test route
* Collecting RSSI Log files, Procedures for preparing Drive Test Report or Analysis for Acceptance for both 2G and 3G Network, Export of LOG File from Tems into Mapinfo
* Understanding Tems Investigation Soft Functions

Module 4: Subjects to Investigate
* Non-working sites/sectors or TRXs,
* Inactive Radio network features like frequency hopping, disabled GPRS
* Overshooting sites coverage overlaps
* Coverage holes

After the Test
* Post processing of data Plotting RX Level and Quality Information for overall picture of the driven area
* Initial Discussions on drive test
* Reporting urgent problems for action

Contact Us at Keltech Communications
1 Adekunle Araba street,off chemist b/s okota isolo lagos
234-8067779880 or 08033052996

Are you finding it difficult to secure a JOB in the Nigeria ISP/TELECOMMUNICATION Industry, keltech Communications may be your answer.

Enroll for Our 4 Months Diploma in IT/Telecom and get your dream JOB.

Network Management leading to N+, Server+, MCTS
• Structured Cabling, Setting up a LAN, TCP/IP Configuration, Domain & Workgroup Configuration, Creating & Managing User Accounts On 2012 Server O S, joining windows 10 to Server 2012 Domain, Sharing Internet and other Resources.

Security Solutions & Application leading to Security +: Security Policies. Account Policies. Auditing. Firewalls Implementation, Account lockout policy settings Securing your New and Existing Wired-LAN & WLAN Network

Internetworking & Router Configuration leading to CCNA : Full Cisco Academy curriculum & Router Configuration leading to 200-120 Certification. Practical exposure with live Cisco routers, switches; exam success, guaranteed!

Linux: Installation & Administration leading to Linux+

Cloud Computing :Setting-up cloud Servers, Installing cloud softwares to manage your organizational Data-base. Virtualization : Configuring Hyper-V on your Exchange Server and running multiple virtual machines on each physical machine.

Transmission Engineering : VSAT: Installation & Configuration leading to CSI: Assemblying of VSAT Hardware from LNB, Feedhorn, BUC, etc. Installing VSAT: Setting Azimuth, Elevation Using Compass & Inclinometer. Terminating & Connecting the Feeder Cables. Entering &
Configuring the Modem, Tracking the Satellite. Commissioning the VSAT.

Optical Fibre :Couplers, Connectors. Multi-mode, single-mode, Pigtails, Patch Cords, etc. Demonstration of Use of Fibre Toolkit, Media Converter, live fibre cable Termination etc. Implementation of Fibre Optics for LANs.

VoIP & VPN Design and Configuration: Installation & Configuration of VoIP Gateways. Assigning Telephone Nos to Phones. Demonstration of Calls on Wired And Wireless Network. Configuring IP- TELEPHONY,
VPN-Setting-up Virtual private Network ,Configuring Site to Site Virtual networks over the Internet, Implementing Remote access Vpn Connection Using 2012 server on the Public Internet Network.

RF Network & Implementation leading to CWNA: RF Site Survey. Installing & Connecting Antennas for 5GHz & 2.4GHz RF. Entering & Navigating Radios. Basic Radio Configuration. ISP Base Station Configuration: Base Station Hardware Installation. Installing Network Software. Configuring IP Settings. Configuring VLANs. Configuring Base Station as Access Point, Wireless Bridge, Repeater, WDS. Configuring Security. Configuring Firewall & NAT. Configuring WAN Parameters.

WiMAX Core Network Engineering: WiMAX is an IP based 802.16 Standard, wireless broadband access technology that provides performance similar to 802.11/Wi-Fi networks.

Microwave Transmission Network: Installing PDH MW Radios ,Setting los link, Commissioning with Mini-link craft, installing both ODU & IDU,SDH MW link and STM 1 Network Integration.

RF Optimization Training:
Problem Analysis
* Analyzing performance reports and statistics for the worst performing BSCs and/or Sites
* Viewing Site performance Trends Reports
* Analyzing previous drive test data

Checks Prior to Action
* Cluster definitions by investigating BSC
borders, main cities, freeways, major roads
* Investigating customer distribution, customer
habits (voice/data usage)
* Running traces on Network to identify problem

Drive Testing
* Preparing Action Plan, defining drive test route
* Collecting RSSI Log files
* Re-driving questionable data
* Non-working sites/sectors or TRXs,
* Inactive Radio network features like frequency hopping, disabled GPRS
* Overshooting sites coverage overlaps
* Coverage holes

After the Test
* Post processing of data Plotting RX Level and Quality Information for overall picture of the driven area
* Initial Discussions on drive test
* Reporting urgent problems for action

GSM Engineering:
GSM Radio & Switches. GSM Fundamentals. Introduction to GPRS, UMTS, etc. Upgrade of 2G to 2.5G to 3G & 4G LTE Network
• Site Location
• Calling IN
• Opening equipment boxes
• Perform Equipment check
• Quality check
• Cabinet Coupling
• Marking the footprint
• Install the RC Outdoor cabinet
• Stack the BC 8910 Outdoor cabinet
• BTS Cables Termination
• Types of cables
• Fiber cables, E1 cables, Alarm cables, jumper cables and grounding cables
• Cable Termination
• Connection of fiber cables from the FS cards to the Tx and Rx ports of the RSU
• Connection of the E1 cable from the LPU card to the DDF
• Connection of the jumper cables to the ANT ports of the RSUs
• Cable color codes
• Cable color codes for Indoor and Outdoor E1 connection
• Performing loop-test
• Shutting the existing RBS cabinet
• Transferring and Connection of the MW PDH Radio to the BC cabinet
• Cross-patching
• Connection of Alarm cables to the Hybrid System
• Connection of Diplexers so as to combine GSM and DCS frequencies
• Connection of Jumper cables to feeder cables using Feeder connector

FACTS OF THE TRAINING

INTERNSHIP OPPORTUNITIES

INDUSTRY RECOGNIZED CERTIFICATE

TRAINING IS PRACTICAL WITH FIELD TRIP

TRAINING OFFERS OPPORTUNITIES TO JOIN TELECOM CONTRACTORS

Contact Us: keltech-Communications ltd, 1 Adekunle Araba Street,off chemist B/s okota rd Isolo Lagos. +234-8033052996

Are you finding it difficult to secure a JOB in the Nigeria ISP/TELECOMMUNICATION Industry, keltech Communications may be your answer.

Enroll for Our 4 Months Diploma in IT/Telecom Training and get your dream JOB.

Network Management leading to N+, Server+, MCTS
• Structured Cabling, Setting up a LAN, TCP/IP Configuration, Domain & Workgroup Configuration, Creating & Managing User Accounts On 2012 Server O S, joining windows 10 to Server 2012 Domain, Sharing Internet and other Resources.

Security Solutions & Application leading to Security +: Security Policies. Account Policies. Auditing. Firewalls Implementation, Account lockout policy settings Securing your New and Existing Wired-LAN & WLAN Network

Internetworking & Router Configuration leading to CCNA : Full Cisco Academy curriculum & Router Configuration leading to 200-120 Certification. Practical exposure with live Cisco routers, switches; exam success, guaranteed!

Linux: Installation & Administration leading to Linux+

Cloud Computing :Setting-up cloud Servers, Installing cloud softwares to manage your organizational Data-base. Virtualization : Configuring Hyper-V on your Exchange Server and running multiple virtual machines on each physical machine.

Transmission Engineering : VSAT: Installation & Configuration leading to CSI: Assemblying of VSAT Hardware from LNB, Feedhorn, BUC, etc. Installing VSAT: Setting Azimuth, Elevation Using Compass & Inclinometer. Terminating & Connecting the Feeder Cables. Entering &
Configuring the Modem, Tracking the Satellite. Commissioning the VSAT.

Optical Fibre :Couplers, Connectors. Multi-mode, single-mode, Pigtails, Patch Cords, etc. Demonstration of Use of Fibre Toolkit, Media Converter, live fibre cable Termination etc. Implementation of Fibre Optics for LANs.

VoIP & VPN Design and Configuration: Installation & Configuration of VoIP Gateways. Assigning Telephone Nos to Phones. Demonstration of Calls on Wired And Wireless Network. Configuring IP- TELEPHONY,
VPN-Setting-up Virtual private Network ,Configuring Site to Site Virtual networks over the Internet, Implementing Remote access Vpn Connection Using 2012 server on the Public Internet Network.

RF Network & Implementation leading to CWNA: RF Site Survey. Installing & Connecting Antennas for 5GHz & 2.4GHz RF. Entering & Navigating Radios. Basic Radio Configuration. ISP Base Station Configuration: Base Station Hardware Installation. Installing Network Software. Configuring IP Settings. Configuring VLANs. Configuring Base Station as Access Point, Wireless Bridge, Repeater, WDS. Configuring Security. Configuring Firewall & NAT. Configuring WAN Parameters.

WiMAX Core Network Engineering: WiMAX is an IP based 802.16 Standard, wireless broadband access technology that provides performance similar to 802.11/Wi-Fi networks.

Microwave Transmission Network: Installing PDH MW Radios ,Setting los link, Commissioning with Mini-link craft, installing both ODU & IDU,SDH MW link and STM 1 Network Integration.

RF Optimization Training:
Problem Analysis
* Analyzing performance reports and statistics for the worst performing BSCs and/or Sites
* Viewing Site performance Trends Reports
* Analyzing previous drive test data

Checks Prior to Action
* Cluster definitions by investigating BSC
borders, main cities, freeways, major roads
* Investigating customer distribution, customer
habits (voice/data usage)
* Running traces on Network to identify problem

Drive Testing
* Preparing Action Plan, defining drive test route
* Collecting RSSI Log files
* Re-driving questionable data
* Non-working sites/sectors or TRXs,
* Inactive Radio network features like frequency hopping, disabled GPRS
* Overshooting sites coverage overlaps
* Coverage holes

After the Test
* Post processing of data Plotting RX Level and Quality Information for overall picture of the driven area
* Initial Discussions on drive test
* Reporting urgent problems for action

GSM Engineering:
GSM Radio & Switches. GSM Fundamentals. Introduction to GPRS, UMTS, etc. Upgrade of 2G to 2.5G to 3G & 4G LTE Network
• Site Location
• Calling IN
• Opening equipment boxes
• Perform Equipment check
• Quality check
• Cabinet Coupling
• Marking the footprint
• Install the RC Outdoor cabinet
• Stack the BC 8910 Outdoor cabinet
• BTS Cables Termination
• Types of cables
• Fiber cables, E1 cables, Alarm cables, jumper cables and grounding cables
• Cable Termination
• Connection of fiber cables from the FS cards to the Tx and Rx ports of the RSU
• Connection of the E1 cable from the LPU card to the DDF
• Connection of the jumper cables to the ANT ports of the RSUs
• Cable color codes
• Cable color codes for Indoor and Outdoor E1 connection
• Performing loop-test
• Shutting the existing RBS cabinet
• Transferring and Connection of the MW PDH Radio to the BC cabinet
• Cross-patching
• Connection of Alarm cables to the Hybrid System
• Connection of Diplexers so as to combine GSM and DCS frequencies
• Connection of Jumper cables to feeder cables using Feeder connector

FACTS OF THE TRAINING

INTERNSHIP OPPORTUNITIES

INDUSTRY RECOGNIZED CERTIFICATE

TRAINING IS PRACTICAL WITH FIELD TRIP

TRAINING OFFERS OPPORTUNITIES TO JOIN TELECOM CONTRACTORS

Contact Us: keltech-Communications, 1 Adekunle Araba Street,off chemist B/s okota rd Isolo Lagos. +234-8033052996,8067779880.

Are you finding it difficult to secure a JOB in the Nigeria ISP/TELECOMMUNICATION Industry, keltech Communications may be your answer.

Enroll for Our 4 Months Diploma in IT/Telecom and get your dream JOB.

Network Management leading to N+, Server+, MCTS
• Structured Cabling, Setting up a LAN, TCP/IP Configuration, Domain & Workgroup Configuration, Creating & Managing User Accounts On 2012 Server O S, joining windows 10 to Server 2012 Domain, Sharing Internet and other Resources.

Security Solutions & Application leading to Security +: Security Policies. Account Policies. Auditing. Firewalls Implementation, Account lockout policy settings Securing your New and Existing Wired-LAN & WLAN Network

Internetworking & Router Configuration leading to CCNA : Full Cisco Academy curriculum & Router Configuration leading to 200-120 Certification. Practical exposure with live Cisco routers, switches; exam success, guaranteed!

Linux: Installation & Administration leading to Linux+

Cloud Computing :Setting-up cloud Servers, Installing cloud softwares to manage your organizational Data-base. Virtualization : Configuring Hyper-V on your Exchange Server and running multiple virtual machines on each physical machine.

Transmission Engineering : VSAT: Installation & Configuration leading to CSI: Assemblying of VSAT Hardware from LNB, Feedhorn, BUC, etc. Installing VSAT: Setting Azimuth, Elevation Using Compass & Inclinometer. Terminating & Connecting the Feeder Cables. Entering &
Configuring the Modem, Tracking the Satellite. Commissioning the VSAT.

Optical Fibre :Couplers, Connectors. Multi-mode, single-mode, Pigtails, Patch Cords, etc. Demonstration of Use of Fibre Toolkit, Media Converter, live fibre cable Termination etc. Implementation of Fibre Optics for LANs.

VoIP & VPN Design and Configuration: Installation & Configuration of VoIP Gateways. Assigning Telephone Nos to Phones. Demonstration of Calls on Wired And Wireless Network. Configuring IP- TELEPHONY,
VPN-Setting-up Virtual private Network ,Configuring Site to Site Virtual networks over the Internet, Implementing Remote access Vpn Connection Using 2012 server on the Public Internet Network.

RF Network & Implementation leading to CWNA: RF Site Survey. Installing & Connecting Antennas for 5GHz & 2.4GHz RF. Entering & Navigating Radios. Basic Radio Configuration. ISP Base Station Configuration: Base Station Hardware Installation. Installing Network Software. Configuring IP Settings. Configuring VLANs. Configuring Base Station as Access Point, Wireless Bridge, Repeater, WDS. Configuring Security. Configuring Firewall & NAT. Configuring WAN Parameters.

WiMAX Core Network Engineering: WiMAX is an IP based 802.16 Standard, wireless broadband access technology that provides performance similar to 802.11/Wi-Fi networks.

Microwave Transmission Network: Installing PDH MW Radios ,Setting los link, Commissioning with Mini-link craft, installing both ODU & IDU,SDH MW link and STM 1 Network Integration.

RF Optimization Training:
Problem Analysis
* Analyzing performance reports and statistics for the worst performing BSCs and/or Sites
* Viewing Site performance Trends Reports
* Analyzing previous drive test data

Checks Prior to Action
* Cluster definitions by investigating BSC
borders, main cities, freeways, major roads
* Investigating customer distribution, customer
habits (voice/data usage)
* Running traces on Network to identify problem

Drive Testing
* Preparing Action Plan, defining drive test route
* Collecting RSSI Log files
* Re-driving questionable data
* Non-working sites/sectors or TRXs,
* Inactive Radio network features like frequency hopping, disabled GPRS
* Overshooting sites coverage overlaps
* Coverage holes

After the Test
* Post processing of data Plotting RX Level and Quality Information for overall picture of the driven area
* Initial Discussions on drive test
* Reporting urgent problems for action

GSM Engineering:
GSM Radio & Switches. GSM Fundamentals. Introduction to GPRS, UMTS, etc. Upgrade of 2G to 2.5G to 3G & 4G LTE Network
• Site Location
• Calling IN
• Opening equipment boxes
• Perform Equipment check
• Quality check
• Cabinet Coupling
• Marking the footprint
• Install the RC Outdoor cabinet
• Stack the BC 8910 Outdoor cabinet
• BTS Cables Termination
• Types of cables
• Fiber cables, E1 cables, Alarm cables, jumper cables and grounding cables
• Cable Termination
• Connection of fiber cables from the FS cards to the Tx and Rx ports of the RSU
• Connection of the E1 cable from the LPU card to the DDF
• Connection of the jumper cables to the ANT ports of the RSUs
• Cable color codes
• Cable color codes for Indoor and Outdoor E1 connection
• Performing loop-test
• Shutting the existing RBS cabinet
• Transferring and Connection of the MW PDH Radio to the BC cabinet
• Cross-patching
• Connection of Alarm cables to the Hybrid System
• Connection of Diplexers so as to combine GSM and DCS frequencies
• Connection of Jumper cables to feeder cables using Feeder connector

FACTS OF THE TRAINING

INTERNSHIP OPPORTUNITIES

INDUSTRY RECOGNIZED CERTIFICATE

TRAINING IS PRACTICAL WITH FIELD TRIP

TRAINING OFFERS OPPORTUNITIES TO JOIN TELECOM CONTRACTORS

Contact Us: keltech-Communications ltd, 1 Adekunle Araba Street,off chemist B/s okota rd Isolo Lagos. +234-8033052996,8067779880.

RNPO TRAINING & OPTIMIZATION
As part of efforts to continually maintain quality of service, GSM/CDMA operators are regularly monitoring and optimizing fluctuating RF parameters on their network, creating internship, employment, and contracting opportunities for persons knowledgeable in RF Optimization tehniques.
Starting Monday-22 Feb-2016

This RF Optimization training will prepare you for such opportunities. Training is mostly outdoor based, and covers:

Introduction: Radio Network Planning and Optimization Overview

Module1: Radio Network Planning
* Basic Importance and scope of planning in a cellular radio network,
* Two Major planning schemes Abducted in a cellular radio network building project
* Requirements for preparing A Nominal planning scheme for A:Business Plan, Coverage Plan, Capacity Plan, Frequency Plan, Parameter Plan,

Module 2:Radio Network Optimization Engineering
* Cluster definitions by investigating BSC
borders, main cities, freeways, major roads,
* Investigating customer distribution, customer
habits (voice/data usage)
* Radio Network Counters and KPIs.

Module 3: Radio Network Drive Test Analysis
* Preparing Action Plan, defining drive test route
* Collecting RSSI Log files, Procedures for preparing Drive Test Report or Analysis for Acceptance for both 2G and 3G Network, Export of LOG File from Tems into Mapinfo
* Understanding Tems Investigation Soft Functions

Module 4: Subjects to Investigate
* Non-working sites/sectors or TRXs,
* Inactive Radio network features like frequency hopping, disabled GPRS
* Overshooting sites coverage overlaps
* Coverage holes

After the Test
* Post processing of data Plotting RX Level and Quality Information for overall picture of the driven area
* Initial Discussions on drive test
* Reporting urgent problems for action

Contact Us at Keltech Communications
1 Adekunle Araba street,off chemist b/s okota isolo lagos
234-8067779880,08033052996

Are you finding it difficult to secure a JOB in the Nigeria ISP/TELECOMMUNICATION Industry, keltech Communications may be your answer.

Enroll for Our 4 Months Diploma in IT/Telecom and get your dream JOB.

Network Management leading to N+, Server+, MCTS
• Structured Cabling, Setting up a LAN, TCP/IP Configuration, Domain & Workgroup Configuration, Creating & Managing User Accounts On 2012 Server O S, joining windows 10 to Server 2012 Domain, Sharing Internet and other Resources.

Security Solutions & Application leading to Security +: Security Policies. Account Policies. Auditing. Firewalls Implementation, Account lockout policy settings Securing your New and Existing Wired-LAN & WLAN Network

Internetworking & Router Configuration leading to CCNA : Full Cisco Academy curriculum & Router Configuration leading to 200-120 Certification. Practical exposure with live Cisco routers, switches; exam success, guaranteed!

Linux: Installation & Administration leading to Linux+

Cloud Computing :Setting-up cloud Servers, Installing cloud softwares to manage your organizational Data-base. Virtualization : Configuring Hyper-V on your Exchange Server and running multiple virtual machines on each physical machine.

Transmission Engineering : VSAT: Installation & Configuration leading to CSI: Assemblying of VSAT Hardware from LNB, Feedhorn, BUC, etc. Installing VSAT: Setting Azimuth, Elevation Using Compass & Inclinometer. Terminating & Connecting the Feeder Cables. Entering &
Configuring the Modem, Tracking the Satellite. Commissioning the VSAT.

Optical Fibre :Couplers, Connectors. Multi-mode, single-mode, Pigtails, Patch Cords, etc. Demonstration of Use of Fibre Toolkit, Media Converter, live fibre cable Termination etc. Implementation of Fibre Optics for LANs.

VoIP & VPN Design and Configuration: Installation & Configuration of VoIP Gateways. Assigning Telephone Nos to Phones. Demonstration of Calls on Wired And Wireless Network. Configuring IP- TELEPHONY,
VPN-Setting-up Virtual private Network ,Configuring Site to Site Virtual networks over the Internet, Implementing Remote access Vpn Connection Using 2012 server on the Public Internet Network.

RF Network & Implementation leading to CWNA: RF Site Survey. Installing & Connecting Antennas for 5GHz & 2.4GHz RF. Entering & Navigating Radios. Basic Radio Configuration. ISP Base Station Configuration: Base Station Hardware Installation. Installing Network Software. Configuring IP Settings. Configuring VLANs. Configuring Base Station as Access Point, Wireless Bridge, Repeater, WDS. Configuring Security. Configuring Firewall & NAT. Configuring WAN Parameters.

WiMAX Core Network Engineering: WiMAX is an IP based 802.16 Standard, wireless broadband access technology that provides performance similar to 802.11/Wi-Fi networks.

Microwave Transmission Network: Installing PDH MW Radios ,Setting los link, Commissioning with Mini-link craft, installing both ODU & IDU,SDH MW link and STM 1 Network Integration.

RF Optimization Training:
Problem Analysis
* Analyzing performance reports and statistics for the worst performing BSCs and/or Sites
* Viewing Site performance Trends Reports
* Analyzing previous drive test data

Checks Prior to Action
* Cluster definitions by investigating BSC
borders, main cities, freeways, major roads
* Investigating customer distribution, customer
habits (voice/data usage)
* Running traces on Network to identify problem

Drive Testing
* Preparing Action Plan, defining drive test route
* Collecting RSSI Log files
* Re-driving questionable data
* Non-working sites/sectors or TRXs,
* Inactive Radio network features like frequency hopping, disabled GPRS
* Overshooting sites coverage overlaps
* Coverage holes

After the Test
* Post processing of data Plotting RX Level and Quality Information for overall picture of the driven area
* Initial Discussions on drive test
* Reporting urgent problems for action

GSM Engineering:
GSM Radio & Switches. GSM Fundamentals. Introduction to GPRS, UMTS, etc. Upgrade of 2G to 2.5G to 3G & 4G LTE Network
• Site Location
• Calling IN
• Opening equipment boxes
• Perform Equipment check
• Quality check
• Cabinet Coupling
• Marking the footprint
• Install the RC Outdoor cabinet
• Stack the BC 8910 Outdoor cabinet
• BTS Cables Termination
• Types of cables
• Fiber cables, E1 cables, Alarm cables, jumper cables and grounding cables
• Cable Termination
• Connection of fiber cables from the FS cards to the Tx and Rx ports of the RSU
• Connection of the E1 cable from the LPU card to the DDF
• Connection of the jumper cables to the ANT ports of the RSUs
• Cable color codes
• Cable color codes for Indoor and Outdoor E1 connection
• Performing loop-test
• Shutting the existing RBS cabinet
• Transferring and Connection of the MW PDH Radio to the BC cabinet
• Cross-patching
• Connection of Alarm cables to the Hybrid System
• Connection of Diplexers so as to combine GSM and DCS frequencies
• Connection of Jumper cables to feeder cables using Feeder connector

FACTS OF THE TRAINING

INTERNSHIP OPPORTUNITIES

INDUSTRY RECOGNIZED CERTIFICATE

TRAINING IS PRACTICAL WITH FIELD TRIP

TRAINING OFFERS OPPORTUNITIES TO JOIN TELECOM CONTRACTORS

Contact Us: keltech-Communications ltd, 1 Adekunle Araba Street,off chemist B/s okota rd Isolo Lagos. +234-8033052996,8067779880.[/quote]

Are you finding it difficult to secure a JOB in the Nigeria ISP/TELECOMMUNICATIONS Industry, keltech Communications may be your answer.

Enroll for Our 4 Months Diploma in IT/Telecom and get your dream JOB.

Network Management leading to N+, Server+, MCTS
• Structured Cabling, Setting up a LAN, TCP/IP Configuration, Domain & Workgroup Configuration, Creating & Managing User Accounts On 2012 Server O S, joining windows 10 to Server 2012 Domain, Sharing Internet and other Resources.

Security Solutions & Application leading to Security +: Security Policies. Account Policies. Auditing. Firewalls Implementation, Account lockout policy settings Securing your New and Existing Wired-LAN & WLAN Network

Internetworking & Router Configuration leading to CCNA : Full Cisco Academy curriculum & Router Configuration leading to 200-120 Certification. Practical exposure with live Cisco routers, switches; exam success, guaranteed!

Linux: Installation & Administration leading to Linux+

Cloud Computing :Setting-up cloud Servers, Installing cloud softwares to manage your organizational Data-base. Virtualization : Configuring Hyper-V on your Exchange Server and running multiple virtual machines on each physical machine.

Transmission Engineering : VSAT: Installation & Configuration leading to CSI: Assemblying of VSAT Hardware from LNB, Feedhorn, BUC, etc. Installing VSAT: Setting Azimuth, Elevation Using Compass & Inclinometer. Terminating & Connecting the Feeder Cables. Entering &
Configuring the Modem, Tracking the Satellite. Commissioning the VSAT.

Optical Fibre :Couplers, Connectors. Multi-mode, single-mode, Pigtails, Patch Cords, etc. Demonstration of Use of Fibre Toolkit, Media Converter, live fibre cable Termination etc. Implementation of Fibre Optics for LANs.

VoIP & VPN Design and Configuration: Installation & Configuration of VoIP Gateways. Assigning Telephone Nos to Phones. Demonstration of Calls on Wired And Wireless Network. Configuring IP- TELEPHONY,
VPN-Setting-up Virtual private Network ,Configuring Site to Site Virtual networks over the Internet, Implementing Remote access Vpn Connection Using 2012 server on the Public Internet Network.

RF Network & Implementation leading to CWNA: RF Site Survey. Installing & Connecting Antennas for 5GHz & 2.4GHz RF. Entering & Navigating Radios. Basic Radio Configuration. ISP Base Station Configuration: Base Station Hardware Installation. Installing Network Software. Configuring IP Settings. Configuring VLANs. Configuring Base Station as Access Point, Wireless Bridge, Repeater, WDS. Configuring Security. Configuring Firewall & NAT. Configuring WAN Parameters.

WiMAX Core Network Engineering: WiMAX is an IP based 802.16 Standard, wireless broadband access technology that provides performance similar to 802.11/Wi-Fi networks.

Microwave Transmission Network: Installing PDH MW Radios ,Setting los link, Commissioning with Mini-link craft, installing both ODU & IDU,SDH MW link and STM 1 Network Integration.

RF Optimization Training:
Problem Analysis
* Analyzing performance reports and statistics for the worst performing BSCs and/or Sites
* Viewing Site performance Trends Reports
* Analyzing previous drive test data

Checks Prior to Action
* Cluster definitions by investigating BSC
borders, main cities, freeways, major roads
* Investigating customer distribution, customer
habits (voice/data usage)
* Running traces on Network to identify problem

Drive Testing
* Preparing Action Plan, defining drive test route
* Collecting RSSI Log files
* Re-driving questionable data
* Non-working sites/sectors or TRXs,
* Inactive Radio network features like frequency hopping, disabled GPRS
* Overshooting sites coverage overlaps
* Coverage holes

After the Test
* Post processing of data Plotting RX Level and Quality Information for overall picture of the driven area
* Initial Discussions on drive test
* Reporting urgent problems for action

GSM Engineering:
GSM Radio & Switches. GSM Fundamentals. Introduction to GPRS, UMTS, etc. Upgrade of 2G to 2.5G to 3G & 4G LTE Network
• Site Location
• Calling IN
• Opening equipment boxes
• Perform Equipment check
• Quality check
• Cabinet Coupling
• Marking the footprint
• Install the RC Outdoor cabinet
• Stack the BC 8910 Outdoor cabinet
• BTS Cables Termination
• Types of cables
• Fiber cables, E1 cables, Alarm cables, jumper cables and grounding cables
• Cable Termination
• Connection of fiber cables from the FS cards to the Tx and Rx ports of the RSU
• Connection of the E1 cable from the LPU card to the DDF
• Connection of the jumper cables to the ANT ports of the RSUs
• Cable color codes
• Cable color codes for Indoor and Outdoor E1 connection
• Performing loop-test
• Shutting the existing RBS cabinet
• Transferring and Connection of the MW PDH Radio to the BC cabinet
• Cross-patching
• Connection of Alarm cables to the Hybrid System
• Connection of Diplexers so as to combine GSM and DCS frequencies
• Connection of Jumper cables to feeder cables using Feeder connector

FACTS OF THE TRAINING

INTERNSHIP OPPORTUNITIES

INDUSTRY RECOGNIZED CERTIFICATE

TRAINING IS PRACTICAL WITH FIELD TRIP

TRAINING OFFERS OPPORTUNITIES TO JOIN TELECOM CONTRACTORS

Contact Us: keltech-Communications ltd, 1 Adekunle Araba Street,off chemist B/s okota rd Isolo Lagos. +234-8033052996,8067779880.

KELTECH COMMUNICATIONS LTD, is a Telecom Service Company engaged in the provisioning of professional technical training and support in the IT and Telecommunications sectors of the Nigerian Economy. We are committed to effectively empower individuals and support corporate organizations in modern technologies, in order to help reposition them for local and global opportunities.

Since its inception in 2007 as a Training company, KELTECH COMMUNICATIONS has thus acquired an extensive expertise in INTERNSHIP, RECRUITMENT, OUTSOURCING, TRAINING AND IMPLEMENTATION.

We invites applicant from suitably qualification into our IT/TELECOM TRAINING PROGRAM starting January 2016. The Telecom Training program is designed for young, energetic Nigerians who are interested in pursuing an Operational and maintenance technical supports career in the IT and Telecommunication industry or related industry.

The 4 Months Diploma in IT/Telecom Training Covers:

Network Management leading to N+, Server+, MCTS
• Structured Cabling, Setting up a LAN, TCP/IP Configuration, Domain & Workgroup Configuration, Creating & Managing User Accounts On 2012 Server O S, joining windows 10 to Server 2012 Domain, Sharing Internet and other Resources.

Security Solutions & Application leading to Security +: Security Policies. Account Policies. Auditing. Firewalls Implementation, Account lockout policy settings Securing your New and Existing Wired-LAN & WLAN Network

Internetworking & Router Configuration leading to CCNA : Full Cisco Academy curriculum & Router Configuration leading to 200-120 Certification. Practical exposure with live Cisco routers, switches; exam success, guaranteed!

Linux: Installation & Administration leading to Linux+

Cloud Computing :Setting-up cloud Servers, Installing cloud softwares to manage your organizational Data-base.

Virtualization : Configuring Hyper-V on your Exchange Server and running multiple virtual machines on each physical machine.

Transmission Engineering : VSAT: Installation & Configuration leading to CSI: Assemblying of VSAT Hardware from LNB, Feedhorn, BUC, etc. Installing VSAT: Setting Azimuth, Elevation Using Compass & Inclinometer. Terminating & Connecting the Feeder Cables. Entering & Configuring the Modem, Tracking the Satellite. Commissioning the VSAT.

Optical Fibre :Couplers, Connectors. Multi-mode, single-mode, Pigtails, Patch Cords, etc. Demonstration of Use of Fibre Toolkit, Media Converter, live fibre cable Termination etc. Implementation of Fibre Optics for LANs.

VoIP & VPN Design and Configuration: Installation & Configuration of VoIP Gateways. Assigning Telephone Nos to Phones. Demonstration of Calls on Wired And Wireless Network. Configuring IP- TELEPHONY,

VPN-Setting-up Virtual private Network ,Configuring Site to Site Virtual networks over the Internet, Implementing Remote access Vpn Connection Using 2012 server on the Public Internet Network.

RF Network & Implementation leading to CWNA: RF Site Survey. Installing & Connecting Antennas for 5GHz & 2.4GHz RF. Entering & Navigating Radios. Basic Radio Configuration. ISP Base Station Configuration: Base Station Hardware Installation. Installing Network Software. Configuring IP Settings. Configuring VLANs. Configuring Base Station as Access Point, Wireless Bridge, Repeater, WDS. Configuring Security. Configuring Firewall & NAT. Configuring WAN Parameters.

WiMAX Core Network Engineering: WiMAX is an IP based 802.16 Standard, wireless broadband access technology that provides performance similar to 802.11/Wi-Fi networks.

Microwave Transmission Network: Installing PDH MW Radios ,Setting los link, Commissioning with Mini-link craft, installing both ODU & IDU,SDH MW link and STM 1 Network Integration. RF

Optimization Training:
Problem Analysis
* Analyzing performance reports and statistics for the worst performing BSCs and/or Sites
* Viewing Site performance Trends Reports
* Analyzing previous drive test data

Checks Prior to Action
* Cluster definitions by investigating BSC
borders, main cities, freeways, major roads
* Investigating customer distribution, customer
habits (voice/data usage)
* Running traces on Network to identify problem

Drive Testing
* Preparing Action Plan, defining drive test route
* Collecting RSSI Log files
* Re-driving questionable data
* Non-working sites/sectors or TRXs,
* Inactive Radio network features like frequency hopping, disabled GPRS
* Overshooting sites coverage overlaps
* Coverage holes

After the Test
* Post processing of data Plotting RX Level and Quality Information for overall picture of the driven area
* Initial Discussions on drive test
* Reporting urgent problems for action

GSM Engineering: GSM Radio & Switches. GSM Fundamentals. Introduction to GPRS, UMTS, etc. Upgrade of 2G to 2.5G to 3G & 4G LTE Network
• Site Location
• Calling IN
• Opening equipment boxes
• Perform Equipment check
• Quality check
• Cabinet Coupling
• Marking the footprint
• Install the RC Outdoor cabinet
• Stack the BC 8910 Outdoor cabinet
• BTS Cables Termination
• Types of cables
• Fiber cables, E1 cables, Alarm cables, jumper cables and grounding cables
• Cable Termination
• Connection of fiber cables from the FS cards to the Tx and Rx ports of the RSU
• Connection of the E1 cable from the LPU card to the DDF
• Connection of the jumper cables to the ANT ports of the RSUs
• Cable color codes
• Cable color codes for Indoor and Outdoor E1 connection
• Performing loop-test
• Shutting the existing RBS cabinet
• Transferring and Connection of the MW PDH Radio to the BC cabinet
• Cross-patching
• Connection of Alarm cables to the Hybrid System
• Connection of Diplexers so as to combine GSM and DCS frequencies
• Connection of Jumper cables to feeder cables using Feeder connector

Overview of Radio & Switching in WCDMA/CDMA OperationsNetwork elements of a GSM network like MS, BTS, Radio, PDH, SDH,BSC, and MSC will be analyzed with a view to understanding call setup and call completion processes. This will create a solid foundation for the practical sessions that will follow in NOC Management.

NOC Management:

GSM, CDMA, ISP operators networks are managed from rooms called NOC, where the entire networks are viewed on computers screens, and administered by Network Administrators. The network administrator plays a crucial role in monitoring the state of the network nodes such as BTS, BSC, VSAT and other Transmission Links.

Customer Service/Technical Support:

This course will familiarize you with fundamental issues that GSM, CDMA and ISP customers encounter, and subsequently position you to resolve such issues, via best practice troubleshooting processes.
The training is perfect for help desk technicians, hardware and software support engineers, and support professionals at all levels, as well as for new graduates looking to be employed this area.

All of this add-up your cv to become a Certified IT/Telecom Engineer.


FACTS OF THE TRAINING

INTERNSHIP OPPORTUNITIES

INDUSTRY RECOGNIZED CERTIFICATE

TRAINING IS PRACTICAL WITH FIELD TRIP

TRAINING OFFERS OPPORTUNITIES TO JOIN TELECOM CONTRACTORS

Contact Us at Keltech Communications. 1 Adekunle Araba Street,off Chemist B/s Okota Rd,Isolo Lagos
08033052996,08067779880.

RADIO NETWORK PLANNING AND OPTIMIZATION

As part of efforts to continually maintain quality of service, GSM/CDMA operators are regularly monitoring and optimizing fluctuating RF parameters on their network, creating internship, employment, and contracting opportunities for persons knowledgeable in RF Optimization tehniques. This RF Optimization training will prepare you for such opportunities. Training is mostly outdoor based, and covers:

Introduction: Radio Network Planning and Optimization Overview

Module1: Radio Network Planning
* Basic Importance and scope of planning in a cellular radio network,
* Two Major planning schemes Abducted in a cellular radio network building project
* Requirements for preparing A Nominal planning scheme for A:Business Plan, Coverage Plan, Capacity Plan, Frequency Plan, Parameter Plan,

Module 2:Radio Network Optimization Engineering
* Cluster definitions by investigating BSC
borders, main cities, freeways, major roads,
* Investigating customer distribution, customer
habits (voice/data usage)
* Radio Network Counters and KPIs.

Module 3: Radio Network Drive Test Analysis
* Preparing Action Plan, defining drive test route
* Collecting RSSI Log files, Procedures for preparing Drive Test Report or Analysis for Acceptance for both 2G and 3G Network, Export of LOG File from Tems into Mapinfo
* Understanding Tems Investigation Soft Functions

Module 4: Subjects to Investigate
* Non-working sites/sectors or TRXs,
* Inactive Radio network features like frequency hopping, disabled GPRS
* Overshooting sites coverage overlaps
* Coverage holes

After the Test
* Post processing of data Plotting RX Level and Quality Information for overall picture of the driven area
* Initial Discussions on drive test
* Reporting urgent problems for action

Benefit: JOB Recommendation.

Contact Us at Keltech Communications
1 Adekunle Araba street,off chemist b/s okota isolo lagos
234-8067779880 or 080330529