₦airaland Forum

Ybholy:
Star Plus Solar Battery now available 🥶

Call or WhatsApp to buy.

It’s Tall Tubular Battery. Best choice in Nigeria

How much for 220ah ?

southsouthking:
What you ordered Vs what you get.
Bros both no follow at all.

It's not even finished yet and you are here judging

Ybholy:
It’s for light during late evening.

Not everyone put Gen around 6/7pm.

Besides, not all families has money to daily fuel cost.

You guys claim rich on social media too muvh this days 😂

Claim rich? How? it's too much to wonder? when I've never in my entire life seen such lights in a sitting room🤷‍♀️

Ybholy:
100W is 37k
200W is 42k

Call for Negotiation
Chat on WhatsApp to place order.


Bulk order discounts available. Payment on delivery in Lagos only. Serious buyers please 🙏🏽

Why would anyone wants to put such light in their sitting room? 🤷‍♀️

Ybholy:
New day Offer.
Instead of 45k each, pay 37k for 1 unit, 35k each if you’re buying more than one.

Offer ends by 8am.

Comes with FREE hanging short iron pole.

Call or WhatsApp the number on signature/image to place order. Only 20 units available for this offer before 8am.

God bless us all 🙏🏽

Chairman, you don turn this thing to spamming. Reduce the rate at which you post here biko

MackyNaija:
Next was fencing the 3 plots and purchased lots of sand, stones, cements and labor cost.
Have no idea how much this costs but I suspect around N4m including the trench digging.

3plots? E sure me die say na mansion you dey plan build. Good to have you back bro

Olumighty123:
Emel Industrial sewing machine for sale, Fairly used, working perfect. Price is 250k, Agege lagos, zero 8 zero 599 one eight 5 31.

Still available

Emel Industrial sewing machine for sale, Fairly used, working perfect. Price is 250k, Agege lagos, zero 8 zero 599 one eight 5 31.

bassdow:
One of the things I thought earlier. Same happens regularly in laptop batteries. A single cell in a string could render the entire thing useless.

I want to believe even that bad one could be refurbished. Probably change the electrolyte and charge seperately.

Glad you had it sorted

Thank you, i noticed the batteries doesn't last as much as it used to, the new battery was well charged.

bassdow:
@Olumighty123 what's the update on this please ?

Turns out a cell in one of the batteries had been damaged, changed battery and its all good now.

bassdow:
What's the voltage of your inverter ? is it 12volts and 24volts ? Asking to know if mayBe you could try the batteries individually.

Could you attempt disconnecting the batteries, and charging them separately first. You could take it to battery charger to reCharge it for like 6-hours but not longer as most of them don't use correct chargers.

Another is to check connections to ensure all is well.

Then you measure with multi-meter / ammeter and allow to sit idle for a while BEFORE reconnecting it.

You want to be sure the Solar panel is delivering accurate charge. Don't be quick to conclude on the batteries.

there are few other things I might do BUT only if you willing to pay for transportation to your location. I could send someone if you prefer.

Batteries (Fake or quality) don cost wella hence hopefully it doesn't get to having them replaced

The uploaded picture shows when it was working, let me do all of this and see what comes of it, I will definitely reach out to you. Thank you very much

Obnoxious2001:
Did you by mistake connect the inverter in reverse?

No sir

bassdow:
How many batteries are you using ?

Are they in series or parallel or combination of both ?

Have you checked connections ?

What's your location ?

As for those suggesting you buy Lithium next time, I wold once again sing my song. When buying lithium, you really need be super sure your dealer / seller is trust worthy as it's way easier buying Rubbish in Lithium, than in normal acid batteries.

They are two 220ahms turbular batteries, connected in series, I'm somewhere around ikeja

GloryJoyeux:
Nice to hear its up and running. Seeing that you are using tubular I would attribute it to maybe deep instant discharge due to surge of all your appliances booting up at once.

Your batteries most likely cannot instantly sustain the surge current required to start up all your appliances at once.

Now that you are well informed on how to clear the error as well as how to prevent the start up surge, you should have no issues again.

Samething re-occured just this morning, could it be that the battery had gone really bad?

Trippledots:
Check and ensure the batteries are getting charged well via the settings both in controller and the inverter if there is AC supply.

Yes, it's charging well.

GloryJoyeux:
Nice to hear its up and running. Seeing that you are using tubular I would attribute it to maybe deep instant discharge due to surge of all your appliances booting up at once.

Your batteries most likely cannot instantly sustain the surge current required to start up all your appliances at once.

Now that you are well informed on how to clear the error as well as how to prevent the start up surge, you should have no issues again.

Thank you very much sir, you're far too kind 🙏🙏

GloryJoyeux:
It could mean that your appliances surge current is more than your battery bms can handle, hence the bms is most likely cutting power.

When you clear the error again, can you turn off the pv input breaker without turning on the heavy appliances and observe if the system remains on?

Kindly provide:
1. The specifications of your battery

2. The list of appliances you are trying to run, are they all turned on at the same time?

3. The individual wattages of the appliances

I did turned off everything and then cleared the error, I then proceeded to turning on the appliances one by one, now it's stable. Is there any chances it could go back to the BP mode? It's 2 tall turbular batteries 220ahms each, 3.5kva hybrid inverter.. the load rating doesn't go beyond 800watts, the batteries now reads between 26.8 to 27.5volt, it's a bet9ja shop. Just small tvs and computers.

GloryJoyeux:
You are welcome.

A good habit: always keep the manual of any electronic device you purchase no matter how vastly knowledgeable and capable you feel when it comes to operating that device.

But sir, I noticed when the appliances are turned on, the inverter went back to BP mode.

GloryJoyeux:
You are welcome.

A good habit: always keep the manual of any electronic device you purchase no matter how vastly knowledgeable and capable you feel when it comes to operating that device.

Noted🤝

GloryJoyeux:
The error code means battery not connected. See attached photo for error code.

Maybe your BMS is asleep, you can try waking it up by following the steps in the manual and go to option 5 and select lithium wake. (see photos)

I can't thank you enough

GloryJoyeux:
The error code means battery not connected. See attached photo for error code.

Maybe your BMS is asleep, you can try waking it up by following the steps in the manual and go to option 5 and select lithium wake. (see photos)

Does it matter if the battery is a turbular battery?

Dam5reey1:
Get the manual and do settings. I believe this is basic. Or you didnt set anything on the inverter before?

No, there was no settings done.. it's a plug and play kind of.

Trippledots:
Your monicker looks familiar. You may need to take it to the company. Go through the manual and see if there the list of error codes has this one and gives a reason for it.

Yes it does, thanks for the help the last time. Someone suggested I look through the user manual and go through the settings, the manual is nowhere to be found even.

Olumighty123:
Good day guys, I've had this set up for a while and just recently the whole thing tripped off when nepa took off and that screenshot was what was displayed, I'm not present at the site and I'm trying to figure out what could be the problem. Please engineers, help out.

I still need help with this biko🙏

Dam5reey1:
Go to settings 05, select LiB to wake battery up

How do I do this sir?

Drgreatone:
Its not seeing ur battery. Check if the breaker btw the inverter and battery hasnt tripped off or there's a loose wire connection btw inv and bttery

So, sir. I checked through the breaker like you asked me to, disconnected the cable and reconnected it, I even went as far as disconnecting the cable that goes to the battery from the inverter, in all, the problem persisted. What could be going on? Please help.

Drgreatone:
Its not seeing ur battery. Check if the breaker btw the inverter and battery hasnt tripped off or there's a loose wire connection btw inv and bttery

Okay sir. I will try that out

Good day guys, I've had this set up for a while and just recently the whole thing tripped off when nepa took off and that screenshot was what was displayed, I'm not present at the site and I'm trying to figure out what could be the problem. Please engineers, help out.

Godisgreatest1:
Oga Aluminum Window, when you are given a job you are expected to deliver without incessant complaints and delays.

I know your type, and I am sure that when this matter escalates you will start to cry 'witch-hunt'.

Don't say you were not warned to go and correct the 'rubbish' you keep supplying to people in the name of Casement Windows.

The compilation of names of clients and the way you dealt with them mercilessly is ready.

You have the habit of repeatedly 'stealing' from people by delivering substandard Casement Windows.

The numerous evidence will be brought in front of you. And when that happens let no one say it is 'witch-hunt'.

No place for thieves in this platform pretending to be Professionals.

Now I dey doubt him story concerning that other client at one estate. A case of tools and material theft, who knows if he was the one who didn't deliver a complete material, na only God know.

Adedward:
GOOD pm brother, am very sorry, I just sent money to my boy, he will come tomorrow to rectify what u complain sir, thanks, am very sorry once again, thanks

Imagine, what would it take for you to go to the site yourself? 🤔 it is becoming too much of you.

medd422:
In 2018, I was in a dark period of my life, nothing was working for me financially and emotionally at that time. So I came across gazzuzz's free mechanic training promo. He wanted to train one person for free and a lot of people applied via mail but luckily, I was the chosen one. I went to see him and he interviewed me which I guess he was satisfied I wasn't really a novice cos vehicle repairs has always been my passion despite being an ex banker. I enjoyed every day in his workshop and gathered a lot of knowledge from his expertise for about a year cos an opportunity came for me to leave the country. That man gave me all the knowledge I needed to be a mechanic for free and I'm glad that the knowledge has given me all the edges I needed to be ahead of my pairs in the automotive industry home and abroad. Thank you Gazzuzz for everything you were to me in particular. I will always be grateful. And you will be greatly missed. I love you my boss

For me, gazzuzz lived a fulfilled life. May the prayers that his family and friends made be with him and keep him safe 🙏

motta:
for this kind economy na wetin you think say person go buy be this.

E no concern you nau, his buyer might be anywhere. The space is big enough for everyone abeg