₦airaland Forum

dollarnaira:
Wetin b d voltage of d camera?

officialfestus:
what question?

dollarnaira:
Branded or laptop cells extracted?

Intellab:
Branded. They came in a carton. 100 pieces/carton.

Intellab:
Branded. They came in a carton. 100 pieces/carton.

officialfestus:
do you mind telling us the specifications of the cells and the cost?

officialfestus:
do you mind telling us the specifications of the cells and the cost?

dollarnaira:
Name?

Intellab:
No name on carton.

dollarnaira:
That is issue one.
Assuming cells are good, cable size is a very very big factor. Was the cable hot during the process?

Intellab:
No. I’m asking if 2 more pack will be able to power 1hp sumo?

Intellab:
2600mah 3.7v #800/cell.

officialfestus:
new cells?

Intellab:
Yes

Intellab:
Yes

officialfestus:
what brand of cells and how I can I get them?

iraybuju:
Don’t waste your money and time on those fake Chinese cells.

Intellab:
No. I’m asking if 2 more pack will be able to power 1hp sumo?

capnies:
1HP SUMO is only 750w, don't know if it has surge voltage
Without surge a 1000w inverter can power it.
I believe it doesn't have a compressor.
So 2000w inverter will power it with ease.
If 220v then the current draw would not exceed 4A

Intellab:
No. I’m asking if 2 more pack will be able to power 1hp sumo?

capnies:
1HP SUMO is only 750w, don't know if it has surge voltage
Without surge a 1000w inverter can power it.
I believe it doesn't have a compressor.
So 2000w inverter will power it with ease.
If 220v then the current draw would not exceed 4A

officialfestus:
Cooking.

tetralogyfallot:
there are many factors to consider bro
1. The BMS u use for the battery( very important)
2. The inverter capacity
3. The size of the cables u use in building the battery pack.

dollarnaira:
Wetin u dey this thing do. Wat of d ones u build b4? You won power ur street?

Intellab:
1. I used 4S 100A BMS. Picture attached.
2. 3000w 12v pure sine wave inverter. Cutoff is 16.1v.
3. I used nickel strips in my build.

officialfestus:
this bms can only output 1200w.
Surge from the pump might be higher than 1200w, I'd suggest you parallel the bms.

How thick is the strip?
0.8,1,1.5 or 2?

Intellab:
0.15 Thickness

officialfestus:
no be thread be that, e too tiny na.

tetralogyfallot:
18650