₦airaland Forum

mctfopt:
If you don't mind, how much did you procure this 6000ES and where did you buy from?

All Guess goes to Fouanistore, based on other parts

Dam5reey1:
Earth Leakage CB, you may read up about it.

am actually asking what he intend using it for in the installation ..

Dam5reey1:
Earth Leakage CB, you may read up about it.

Just did little reading on this, are rccb a must in solar installation?

Kintowi:
Selling my solar setup.
2 solar panels 400w in total
Famicare Inverter
200Ah battery and
PWM charge controller

Serious buyers only.
0913two44twosixfive3

Still available

mctfopt:
If you don't mind, how much did you procure this 6000ES and where did you buy from?

I got it for N605k from fouanistore.

kristien4:
Just did little reading on this, are rccb a must in solar installation?

Actually nothing is a must in Solar installation.

Obnoxious2001:
am actually asking what he intend using it for in the installation ..

Earth Leakage

burnerr:
I got it for N605k from fouanistore.

Thanks a lot

Dam5reey1:
All Guess goes to Fouanistore, based on other parts

Thank you

Interesting times.

Dam5reey1:
Actually nothing is a must in Solar installation.

Lol.. true tho. But is it needed? Or its an overkill?

All sizes of SRNE lithium batteries and all sizes of SRNE hybrid inverters are available.

Call/whatsapp me on 08168986461

2.5kva 24v durasol inverter available, #270,000. Call/whatsapp me on 08168986461

550w JA solar panels available, #125,000. Call/whatsapp me on 08168986461

Opistorincos:
Good day house, please, what is the best felicity MPPT settings for 12v 100ah Nigerian build Lifepo4 battery with 100A bms?

What ahms mppt is the felicity?

.

2kw 12 hybrid inverter for sale at give away price.. Bought a mth ago..owner want to upgrade to 48v system.

₦200K

Working perfectly.

ask4bk:
What ahms mppt is the felicity?

60a

Opistorincos:
60a

Hope you are not carrying much load. Highest 60a charger will charger your lithium battery is 700w+- and that is with good sun.
If your load is 400w+ you may discharge your battery faster than you charge it on some days.
It's advices not to have load more than 250w, my opinion. I've one 12v lithium and only use a fridge of 100w on it.

For settings, i suggest charging voltage to be 14-14.1V. Float voltage should be same as your charging voltage. This enables the charger to carry the load of your device when it's filled and there's sun. If not, it'll fill up and stop working while draining your battery again

Ferdiwar:
This quotation is overly inflated and the installer seems inexperienced from the size of Cables on the list.

16mm DC cable is too much for 6 panels that will be connected in series as the current is under 20A.

Same goes to 16mm AC cable for a 6KW inverter.

Omo, I've same setup and I insisted on 16mm. It's just an overkill but in the long run it saves you from cable heats and in the future you want to upgrade you don't need to buy cables again.

Good evening experts,
Please which inverter would be best for my home usage out of Schneider SW4024 & SW4048? Also, what's they minimum capacity of LiPo4 battery bank that would be required?

waleayeni1:
Good evening experts,
Please which inverter would be best for my home usage out of Schneider SW4024 & SW4048? Also, what's they minimum capacity of LiPo4 battery bank that would be required?

Abeg make una help me make I no go buy rubbish

15kwh felicity lithium battery,10kva felicity inverter and 120A felicity charge controller available at good price

Call or WhatsApp me on 09116033581

dollarnaira:
I know a time will come when there will be high volt (30v - 450v) single mppt just like hybrids.

is available

60A EPEEVER MPPT solar charge controller available
Price #425,000

Call or WhatsApp me on 09116033581

Can anyone pls suggest a good low wattage blender?

maklelemakukula:
But inverters have "maximum recommended pv power". Overloading it would be dangerous

LOL.. thats not true. it will clip. I do run my 10kv hybrids with 33,000 watts of solar panels connected. MPPT pulling 120amps from dawn to dusk. One year and still working. In my system, none of my systems have less than 30,000 watts of solar panels attached to it and i have 8 systems running. I can attach videos.

ask4bk:
Omo, I've same setup and I insisted on 16mm. It's just an overkill but in the long run it saves you from cable heats and in the future you want to upgrade you don't need to buy cables again.

16mm is too overkill. Its a waste of money. For your next project, get an inverter with 500v MPPT. Series those panels and use a smaller cable like 6mm, use the savings to buy more panels. You can never have too many panels.

KA24DETT:
LOL.. thats not true. it will clip. I do run my 10kv hybrids with 33,000 watts of solar panels connected. MPPT pulling 120amps from dawn to dusk. One year and still working. In my system, none of my systems have less than 30,000 watts of solar panels attached to it and i have 8 systems running. I can attach videos.

Put more details, 33kw on one or 3 MPPT?
What is the PV capacity of the Hybrids?

Better to have efficient systems than waste resources.

You shouldn't oversize pass 1.5X of the PV capacity else get another MPPT to support. There are HV MPPT now, that can be added.

KA24DETT:
16mm is too overkill. Its a waste of money. For your next project, get an inverter with 500v MPPT. Series those panels and use a smaller cable like 6mm, use the savings to buy more panels. You can never have too many panels.

I use standalone mppt with 150v max. I can only put max of 3 panels in series. If I've 3 sets of that and I've to parallel them, the ahms will surely go above 50a. Max that is recommended for 6mm² is 55a. Personally, anything that nears 40a I can't use 6mm on it.

16mm² may be overkill for you, but it's the best for my situation and protects me from heat, excessive voltage drop and high resistance.

KA24DETT:
LOL.. thats not true. it will clip. I do run my 10kv hybrids with 33,000 watts of solar panels connected. MPPT pulling 120amps from dawn to dusk. One year and still working. In my system, none of my systems have less than 30,000 watts of solar panels attached to it and i have 8 systems running. I can attach videos.

See Elon Musk's cousin oh.

Where una de get this money abeg?

By the way, 120a from morning to evening is like just 6kwh constant from that mppt. With a 33kwh panels, what happens to the remaining 26kwh+- wasting?
I know you oversized so that even with low sun you are pulling 6kwh, but coming from you who advised that we should save cost, I no see any saving of cost you did here oh. You just de waste panels up there. And that's just one setup oh, you said you've like others similar to that.
Money!

KA24DETT:
LOL.. thats not true. it will clip. I do run my 10kv hybrids with 33,000 watts of solar panels connected. MPPT pulling 120amps from dawn to dusk. One year and still working. In my system, none of my systems have less than 30,000 watts of solar panels attached to it and i have 8 systems running. I can attach videos.

what brand is this 10kw hybrid inverter?

ask4bk:
See Elon Musk's cousin oh.

Where una de get this money abeg?

By the way, 120a from morning to evening is like just 6kwh constant from that mppt. With a 33kwh panels, what happens to the remaining 26kwh+- wasting?
I know you oversized so that even with low sun you are pulling 6kwh, but coming from you who advised that we should save cost, I no see any saving of cost you did here oh. You just de waste panels up there. And that's just one setup oh, you said you've like others similar to that.
Money!

You are looking at name plate rating which you rarely get, its rare for a 550watts panel to produce 550 watts in real life considering factory testing was done at STC... I reckon the most you can get is 70-80% of stated rating. Some people do produce that but rarely consistent.

I have a 16kw battery but my daily load is 63kw. ( 8kw continous x9 hours). Its not that oversized. We came across a deal to buy panels very cheap so we did.. it was luck.
Is it efficient? NO. Can you get more output from the system? YES.
We are more concerned with getting consistent output despite low light conditions. Its extreme but the point of my post is to prove you can add more panels past the stated inverter rating.. My system is different than a regular user.. The project calls for eliminating diesel generator use 100% completely during the day with no excuse for rain or clouds.