₦airaland Forum

51.2V, 100AH, 5KWH

Battery Specifications
1. Nominal Voltage: 51.2V
2. Capacity: 100Ah
3. Energy: 5.12kWh (51.2V x 100Ah)
4. Cell Type: CATL - LFP
5. BMS : 100ah
6. Company: Shenzhen New Oasis Energy Storage Co.,Ltd



All in one (PowerStation)
25.6V, 200AH, 5KWH, 3.3kva

Battery Specifications
1. Nominal Voltage: 25.6V
2. Capacity: 200Ah
3. Energy: 5.12kWh (25.6V x 100Ah)
4. Cell Type: CATL - LFP
5. BMS : 100ah
6. inverter pure sine wave: 3.3KVa
7. MPPT : 120A
8. Company: Shenzhen New Oasis Energy Storage Co.,Ltd

As seen

51.2v, 100ah, 5kwh

New energy

Empowering a sustainable future, our affordable green energy solutions deliver quality performance without compromising the environment. Reliable, efficient, and eco-friendly, our systems help reduce your carbon footprint. Invest in a greener tomorrow, today

Experience uninterrupted power supply with our solar solutions, eliminating maintenance costs for a hassle-free experience. Powered by long-lasting lithium batteries, our systems guarantee reliability for 10 years and beyond. Say goodbye to power outages and hello to energy independence. Go solar today and enjoy a brighter, more sustainable future.

Place your order today. Quality grade A cell lithium battery.

For fast reply reach out to us via WhatsApp

Get top-notch power solutions with our premium lithium batteries, featuring Grade A cells and European standards. Our batteries are paired with premium inverters for efficient energy conversion. For a reliable and high-quality power setup, send me a direct message. Let's get you set up with the best.



We sell premium only products

From the above cell info, it indicates a Grade A cell LifeP04 battery.


We sell only quality and premium battery only...


Reach out to us on whatsapp.

Limited stock available

To determine if a lithium battery cell is "Grade A" using BMS (Battery Management System) status, you'll need to look for several key indicators. While a BMS doesn't directly say "Grade A," you can infer the cell quality through these signs:

1 Cell Voltage Consistency

Grade A cells: Very tight voltage difference across all cells (typically <10 mV when balanced)

BMS Reading: Look at the individual cell voltages. If they’re nearly identical, it’s a good sign.

Warning sign: Differences >30–50 mV may indicate lower grade or aging cells.

2. Internal Resistance (if available)

Grade A cells: Low and very consistent internal resistance (measured in milliohms)

BMS Reading: Some smart BMS systems show this.

Low resistance (e.g., <5 mΩ) and consistency = higher quality

3. Capacity Calibration

Grade A: BMS reports full capacity close to rated capacity (e.g., 100Ah actual for a 100Ah battery)

Grade B/C: Capacity significantly lower than rated (e.g., 70–80Ah for a 100Ah rating)

4. Cycle Count and Degradation

Grade A new cell: 0–10 cycles, full voltage range available

If the BMS shows high cycle count or reduced upper/lower voltage limits, it may not be Grade A.

5. Temperature Stability

Uniform and stable temperature across all cells during charge/discharge is another indicator of cell balance and quality.

Bonus Tip: Manufacturer Data

If the BMS is part of a smart battery system, you may be able to query:

Cell manufacturer

Production date

Batch number

Use these to check if cells are traceable and from reputable sources (common with Grade A)

our high-quality 5kWh, 51.2V 100Ah Lithium LiFePO4 battery, designed for reliable energy storage. This battery offers exceptional safety, long lifespan, and high efficiency

Awoof Flash buy

All in one Lithium power station (Grade A cells)

3.3KVA - Inverter
200AH - 25.6V
5120 - WH

Used 6pcs of 550W Ja Solar Panels (156 cells) Mono


Interested buyer should slide into my DM

All in one (PS)
25.6V, 200AH, 5KWH, 3.3kva

Battery Specifications
1. *Nominal Voltage*: 25.6V
2. *Capacity*: 200Ah
3. *Energy*: 5.12kWh (25.6V x 100Ah)
4. *Cell Type*: CATL - LFP
5. *BMS* : 100ah
6. *inverter pure sine wave*: 3.3KVa
7. *MPPT* : 120A

Price - ₦2,350,000