₦airaland Forum

webphils2034:
Based on your Listed appliances (2 fans, TV , 2 Laptops, 2 Consoles -minus Fridge and dispenser), The Ecoflow Delta Pro (3.6kwh) can power everything for about 20+ hours (remember everything depends on usage) and if you fill like it you can adda an extra battery to expand capacity to (about 7.2kwh) and you can get about 2 days without solar charge. If you want to add solar panels you will extend the usage for as long a s possible. While Ecoflow panels are good i think they are a bit pricy and you can save money by using quality options like Jinko 555w Panel which is more budget friendly. Remember everything depends on usage to make purchases you can https://detopsyelectricalshop.com/ecoflow-nigeria/

Thank you for the feedback. Decided to go for an inverter system instead

Mavor:
Thank you for the feedback. Decided to go for an inverter system instead

Best choice

Does Deriy have packs with EVE or Catl cells or they only use Hithium cells?

Dam5reey1:
This Deriy 12V 280AH can be yours for only 520K 500k

Just one unit.
Lagos

Ferdiwar:
Does Deriy have packs with EVE or Catl cells or they only use Hithium cells?

They have packs with all of them.

Just depends on the battery size..

Where are these guys? @ojeysky and @NiyiOmoIyunade. It has been a long time they commented here.

adrusa:
Where are these guys? @ojeysky and @NiyiOmoIyunade. It has been a long time they commented here.

God so much bless Nigeria and this thread with many profs in thier field,even when some are not available,new voice will come up.

Someone should reach out to them pls.I do that atimes.

BIY installation completed
10 panels 590w
6kva

230Ah 12V MOTEX TUBULAR BATTERIES AVAILABLE
Currently one of the best selling solar tubular battery.
Price #260,000

Call or WhatsApp me on 09116033581 to place your orders,we deliver nationwide💯

Dam5reey1:
BIY installation completed
10 panels 590w
6kva

You are a chairman oo..

Kayla does not have this item is stock again..

More grace and thank you for all you do

God bless you

Sorry what type of adaptor did you use on the batteries because my Growatt does not have this?

Thank yoj

temi4fash:
You are a chairman oo..

Kayla does not have this item is stock again..

More grace and thank you for all you do

God bless you

Sorry what type of adaptor did you use on the batteries because my Growatt does not have this?

Thank yoj

Thanks boss..

This one came bundled with the inverter.

adrusa:
Where are these guys? @ojeysky and @NiyiOmoIyunade. It has been a long time they commented here.

I am well and good Bro. I do pass by once in a while....good to see the growth (just like those that joined the thread before me will have said as well ) Thanks

Good day gurus...

If I have two 590W panels, 12v 3000W transformerless inverter, a 12v 100AH LiFePo4 battery and a 60A 12v/24v Felicity Charge controller.

1. Can I connect the two 590w panel in series to the 60A 12/24V mppt charge controller in order to charge a 12v lifepo4 battery.

2. Since my panels are oversized, It is Felicity 60A charge controller. I intend connecting a total load of about 500W during the period of sunset (from 7am to 4pm daily) between the CC and 12 v 3000w transformerless inverter.

So Is it possible that while the charge controller delivers about 720w to the battery, the remaining power from the panel will be supplied to the load of about 500W.

Good morning bosses in the house. Please i need your input on this.
There is a boarding school that called me that they need an solar system that can power their water pump everyday.
They have 4 water Sumos of each 3Hp totalling 12Hp. Please i want to know the size of Battery bank, Solar panels and inverter to use for this project.
Note:, they use water every morning before they go for classes, also evening time when school closes. On weekends, they use it mostly for washing of clothes and other hostels chores.

1

Ferdiwar:
Does Deriy have packs with EVE or Catl cells or they only use Hithium cells?

1

temi4fash:
You are a chairman oo..

Kayla does not have this item is stock again..

More grace and thank you for all you do

God bless you

Sorry what type of adaptor did you use on the batteries because my Growatt does not have this?

Thank yoj

Dam5reey1:
Cworth products especially GCL 12V are now on Heavy Discounts..
But their is a catch....

12V 100ah 177k
12V 200ah 330k
12V 300ah 520k

Capacity testing, cell types BMS coming soon...

Still waiting for the review

Dam5reey1:
Just know what you are doing, you can safely do it for science.

U dey find comrade join u sir...

Dam5reey1:
Cworth 24V 100AH, available for 575k 540k..

Scatter the market sir... We dey ur back

Emmalex83:
Good morning bosses in the house. Please i need your input on this.
There is a boarding school that called me that they need an solar system that can power their water pump everyday.
They have 4 water Sumos of each 3Hp totalling 12Hp. Please i want to know the size of Battery bank, Solar panels and inverter to use for this project.
Note:, they use water every morning before they go for classes, also evening time when school closes. On weekends, they use it mostly for washing of clothes and other hostels chores.

Tricky. They can pump in the afternoon to handle the evening usage but the morning one has to be handled entirely by batteries.

Also sumos are tricky, since most draw a lot more than their rated output. For example, this 12HP is about 9kw on paper but in real life could be as much as 15kw.

What I'd tell you is to go there and get actual real life data on

- Power draw on each sumo
- How long it takes to pump full

You need a watt/clamp meter for the first one.

ELECTROLYTE & DEIONISED WATER IN STOCK !!


Deionised water 25 Litres >> N14,000 PER 25L GALLON (Selling with free 25L black Gallon)(BUY 2 GALLONS & GET 5L FREE)

Deionised water 25 Litres >> N15,000 PER 25L GALLON (Selling with free 25L white Gallon)(BUY 2 GALLONS & GET 5L FREE)

Distilled water 5 Litres >> N3,000 (6 pcs minimum order quantity)

Hydrometer >> N8,000

Electrolyte 5L >> N5,500

Electrolyte 25 Litres = N25,000 (with free 25L Industrial Gallon) .. (BUY 2 GALLONS & GET 5L DISTILLED WATER FREE).

ALL PRODUCTS COMES PACKAGED WITH GALLON


Location >> Lagos state


See contact details in profile

All sizes of AE mem solar hybrid water heater available now.. Call/whatsapp me on 08168986461 to order your..

Nationwide delivery from Lagos to zamfara

10kva 48v felicity IVPS inverter still available, #1,120,000. Call/whatsapp me on 08168986461

1. The charge controller max input voltage will determine if the panels can be connected in series or parallel.

2. The 720w is the maximum power the charge controller can output for a 12v system, so if you connect a load of 500w to the inverter, the remaining 200w+ will be used by the battery for charging.

cutefy:
Good day gurus...

If I have two 590W panels, 12v 3000W transformerless inverter, a 12v 100AH LiFePo4 battery and a 60A 12v/24v Felicity Charge controller.

1. Can I connect the two 590w panel in series to the 60A 12/24V mppt charge controller in order to charge a 12v lifepo4 battery.

2. Since my panels are oversized, It is Felicity 60A charge controller. I intend connecting a total load of about 500W during the period of sunset (from 7am to 4pm daily) between the CC and 12 v 3000w transformerless inverter.

So Is it possible that while the charge controller delivers about 720w to the battery, the remaining power from the panel will be supplied to the load of about 500W.

Ferdiwar:
1. The charge controller max input voltage will determine if the panels can be connected in series or parallel.

2. The 720w is the maximum power the charge controller can output for a 12v system, so if you connect a load of 500w to the inverter, the remaining 200w+ will be used by the battery for charging.

Thanks for ur response.

This is the spec of Felicity 60A CC.
Maximum Input Power: 12V-825W (Parallel). 24V-1650W (Series)
PV Array MPPT Voltage Range: 60-130V DC

The 590W PV parameters when connected in series:
Voc= 105.26v (52.63v * 2)
Vmp= 87.42V ( 43.71v* 2)
which is still within the pv array range of 60-130v.

It means if I connect the pv in parallel, I'll be limited to just 825W whereas my panel combination can produce 1180W(590w*2). That's about 355W wastage, meanwhile connecting pv in series will yield 24V-1650W.

can I conclude by saying the pv series connection is better for my setup since the mppt charge controller can still charge my 12v lifepo4 battery even though the pv are series connected.

I have this POWMR 60A (pics attached) charge controller and 3 pieces of Jinko 590W panels with the following parameters.
My system is 24V.


Maximum Power Voltage(Vmp) 43.71V

Maximum Power Current(Imp) 13.5A

Open Circuit Voltage(Voc) 52.63V

Short Circuit Current(Isc) 14.13A

Is it okay to series this panels with this controller?
If not, can you recommend a controller that can do this work and give room for possible future upgrade?


@Dam5reey1, dollarnaira and other bosses.

olujosh301:
Still waiting for the review

https://www.tiktok.com/video/7493879653606640901/

Cworth 12V 300AH capacity testing

bkuranga:
I have this POWMR 60A (pic attached) charge controller and 3 pieces of Jinko 590W panels with the following parameters.

Maximum Power Voltage(Vmp) 43.71V

Maximum Power Current(Imp) 13.5A

Open Circuit Voltage(Voc) 52.63V

Short Circuit Current(Isc) 14.13A

Is it okay to series this panels with this controller?
If not, can you recommend a controller that can do this work and give room for possible future upgrade?


@Dam5reey1, dollarnaira and other bosses.

You have missed an important detail.

What voltage does your battery run? 12v 24v 36v 48v

FEGEITOK:
You have missed an important detail.

What voltage does your battery run? 12v 24v 36v 48v

Oh, 24V.
Thank you.

bkuranga:
Oh, 24V.
Thank you.

connect all the 3 panels in series

bkuranga:
Oh, 24V.
Thank you.

Series just 2 panels as Max pv for 24v powmr is 105v.

Guys just a quick question pls. I’m still learning

I’ve observed that a lot of suggestions here tells people to series their panels (even for a 12V system) which I know increases the voltage and keeps a constant current.

For example, someone suggested a series connection for 3 panels likely to have a short circuit voltage of 48V and above for a 24V system. This is more like 144V (I.e 48V*3). Sorry, but is this voltage not too much for a 24V system?

Or Will the controller limit the input voltage of about 144V coming from the panel to the required charging voltage of 27V-28V for the system?

If yes, then what happens to the other voltage? Is it wasted? If 28V is what is being used for charging the voltage and the constant current in the system is 13Amps, it means that the power from a supposed panel of 1872Watts (I.e 144V * 13Amps) is actually 364Watts (I.e 28V * 13Amps).

Please someone should kindly educate me on this, it’s interesting to know. Thanks.

Dam5reey1:

https://www.tiktok.com/video/7493879653606640901/

Cworth 12V 300AH capacity testing

Nice video.
Guess it's fair for the price?
Make I save money go for Deriy abeg