₦airaland Forum

GloryJoyeux:
Hi,

I believe these are not real time figures, most times there is a 5 minutes refresh delay. And sometimes it doesn’t refresh all the figures. So it probably didn’t refresh either the pv or the battery charging figure.

You can try refreshing again in 5 mins, alternatively, you can confirm physically from growatt inverter.

This is why solar assistant has an edge, it provides live monitoring information and not at 5 mins intervals like most inverters do.

CuteMaro:
Please guys where is the telegram link to this awesome thread?

mctfopt:
I can confirm Solar Assistant's speed and superior real-time edge capabilities compared to other monitoring solutions.

GloryJoyeux:
Hi,

I believe these are not real time figures, most times there is a 5 minutes refresh delay. And sometimes it doesn’t refresh all the figures. So it probably didn’t refresh either the pv or the battery charging figure.

You can try refreshing again in 5 mins, alternatively, you can confirm physically from growatt inverter.

This is why solar assistant has an edge, it provides live monitoring information and not at 5 mins intervals like most inverters do.

obinna37:
Flash sale

EAsun power puresinwave 12v 4000w inverter continues power is 2500w) it can power your fridge or freezer and others

Owner is upgrading

Price #120k fix

08034034206

GloryJoyeux:
Hi,

I believe these are not real time figures, most times there is a 5 minutes refresh delay. And sometimes it doesn’t refresh all the figures. So it probably didn’t refresh either the pv or the battery charging figure.

You can try refreshing again in 5 mins, alternatively, you can confirm physically from growatt inverter.

This is why solar assistant has an edge, it provides live monitoring information and not at 5 mins intervals like most inverters do.

temi4fash:
PLease how we get to use the Solar Assistant with our Inverter?

Do i need to buy a different module aside the one from Growatt?

BiigTee:
Who can please tell me why the ppv generated and the charging power are yards apart on this growatt inverter?

BiigTee:
Who can please tell me why the ppv generated and the charging power are yards apart on this growatt inverter?

AndroBlaze:
When was this setup?? I just looked again, you've generated more today than you've generated this whole month...their is something clearly wrong with the configuration.

mctfopt:
I can confirm Solar Assistant's speed and superior real-time edge capabilities compared to other monitoring solutions.

ManAdii:
Have your tested TBB sir?
I'm not sure deye solar assistant can beat theirs

aaforke:
Hi guys.

Any idea how much a SRNE 1.5kVa inverter and their 2.56 kWh lithium battery cost ?

HeavenlyBang:
1.5kw inverter was about 330k last month.

aaforke:
Hi guys.

Any idea how much a SRNE 1.5kVa inverter and their 2.56 kWh lithium battery cost ?

uche393:
please what is the current price of Cworth 12v 100ah and is there any dealer here?

HeavenlyBang:
Update on my order, it was just canceled as seller claims he's unable to ship to Nigeria.

This battery you ordered is 11.1v, though, keep that in mind.

My fan, for example, uses a 15v input, which is why the speed of the fan drops noticeably when it's using battery (12.8v). 11.1v may not be ideal. Give us feedback when you can, however.

bassdow:
That the Fan has an input of 15v, probably for a charger, doesn't mean it's directly sent to the Fan's motor. A couple of step-downs would be made that at end of the day, the motor might actually be taking 12-volts or less

Trippledots:
It's a contactor with 2 normally open and 2 normally close connections. Grid goes to the coil, and also to the normally open contactor input. Inverter output goes to the normally closed input.

The normally open and normally closed outputs are interconnected and goes as the final output

How it works:
When there is power supply, the contactor energizes and closes the normally open contacts sending power out from NEPA.

Once Nepa goes off, contactor is de-activated and swings back to the normally closed position, sending power out from the inverter... I have a surge protector that helps with voltage fluctuations and also my stab has a delay timer that helps the overall function of the contactor.

ajabani4allah:
You are very much correct on this but also don't forget that if the input is 12v instead of the normal 15v then there is no way the 12v will get to the DC motor based on those couple of steps you mentioned, hence a reduction in the speed

ajabani4allah:
You can you use a voltage boost with your 12.8v or 11.1v lithium battery to raise the the input to the normal 15v

AndroBlaze:
Just checked and refreshed the app after dropping my previous post, it had not updated the monthly figures either.

Anyway, another thing to consider, did you set maximum charging amps on the inverter- IIRC you can actually set maximum charging amps for pv and grid (I remember limiting the amps for grid).

HeavenlyBang:
Damn, that's much better than I expected. 3.7kwh for 450k is an exceptional deal. Even better than the cheap Cworth 100aH unit.

Good stuff.

Just saw that they have a 25.6v 314ah battery for 800k. Going to be very hard to beat that price.

BTW, for your battery tests, you should consider doing a load test at the start. Maybe 0.5C discharge for a minute or two to see if the battery handles it. Should be helpful for people who want to run things like microwaves or industrial blenders.

Dam5reey1:
With only 650k or you will get better deal at Haisic 1.5kva + 3.6kwh lithium...

SRNE hold your 1 million tight

mctfopt:
It is not just for Deye but many other types of inverters.

And no, I haven't seen TBB remote monitoring software. I'm more of a DIY person so I like things that can work for many inverters not just one particular type of make.

ajabani4allah:
Does the Haisic inverter have the ones with larger capacity?

Preator:
Can this be used with Gospower? How much is it and where can i get?