₦airaland Forum

cutefy:
My major worry is the thought of when I want to upgrade my panel size in the future. Having different sized panels may affect my setup in the future. Another option I was given is to top up payment for two 620W panels.

Dam5reey1:
At this point, Seems your posts needs to start getting reported for spamming, it's not longer normal inquiry.

You will still ask if the responders are legit or not.

amicdan:
Hi bro,

Series connection or parallel?

dollarnaira:
Turn off pv breaker when traveling. Not that something bad will happen sef. Bros no fear. But sincerely enh, you need to ELIMINATE THE NEGATIVE THOUGHTS YOU HAVE ON LIFEPO4.

fuckboys:
I have disconnected 2 panels, now I have 2pcs for 420 Cworth panels I’m not making use of.

This Cworth panels are very good, even with just 2 panels I get around 700+ watts which is enough for me.

Mavor:
I will do more research into it before I make the purchases next week when I am back in town. Thank you for your guidance.

Oem18:
Why?? If you cannot satisfy his quest for knowledge step aside. You yourself did not become knowledgeable overnight.

The research he has made so far on this thread has been quite captivating and will help future newbies.

mctfopt:
I have a friend that stays London. She has 20kwh of lithium which she uses only in Christmas.

The rest of the year it just sits. Except for like two or three times a year some of the nephews/nieces visits the house.

No issue.

Dam5reey1:
Research?
The new block feature make sense Sha..

maklelemakukula:
Where to buy original chint or tomzn please

AndroBlaze:
I didn't get it at first, I take it you mean the 20kwh battery is in her house in Nigeria shey?

I was confused why anyone abroad would have that sort of battery and not use it to save on their truly killer electricity bills.

Trippledots:
Clean 10kva Victron Quattro available.

No issues...

Not repaired...

Designed in Netherlands, made in India..

Small money!!

N2.5m! ( A new unit now is 4m+)

omotoda:
You are better off this way,.That's 840watts as against the 720watts recommended for 12v.The difference is still acceptable.

You can invest in another Mppt and have the remaining two panels set up on it

That will be 120amps expected generation. Your battery will be very happy!!!

favouredbymercy:
The other option is better than this. Almost all jinko panels up to 605w have a current rating around 13amps. From 610w up has around 15amps (you can check out their specs sheets to confirm). Future expansion would most likely be series connection. So if you get the 620w panel now, know you would stick to the 610w + going forward.

BigDickProblems:
Great. Seems you finally fixed the issue?

fuckboys:
all issues fixed except the inverter charging problem. Still tripping mcb

favouredbymercy:
The other option is better than this. Almost all jinko panels up to 605w have a current rating around 13amps. From 610w up has around 15amps (you can check out their specs sheets to confirm). Future expansion would most likely be series connection. So if you get the 620w panel now, know you would stick to the 610w + going forward.

fuckboys:
all issues fixed except the inverter charging problem. Still tripping mcb

fuckboys:
120 what?

If the over current protection of the battery doesn't trip.

fuckboys:
all issues fixed except the inverter charging problem. Still tripping mcb

bbally:
Thought you changed the breaker

AndroBlaze:
Just checked one of your old post where you mentioned you have a voltage regulator connected to the whole flat.

Is it a new addition and is it connected directly to your inverter?

omotoda:
For 280ah battery. it shouldn't .Moreover the 120amp is theoretical. By the time you factor in losses in cable,efficiency loss etc you might be getting less than 100amp

omotoda:
That's shoukd be a problem with the inverter

fuckboys:
I'm just charging with only solar for now, where is the most reliable place to have the inverter fixed? It's a sukam transformer based Indian inverter.

amicdan:
Hi bro,

Series connection or parallel?

Oem18:
Why?? If you cannot satisfy his quest for knowledge step aside. You yourself did not become knowledgeable overnight.

The research he has made so far on this thread has been quite captivating and will help future newbies.

fuckboys:
yes the voltage regulator is connected and powering the entire flat including the inverter. The grid literally comes in through the stabilizer.