₦airaland Forum

iraybuju:
It’s not the battery but the inverter that is shocking or is it not connected to the inverter already?

He said his battery case is shocking not his inverter. Except you're saying the battery is having a contact with the inverter.

Obnoxious2001:
First confirm if it will charge at 30v.

i confirmed today chief, was already blazing 80w at 35v of total panel voltage earlier this morning.

ManAdii:
He said his battery case is shocking not his inverter. Except you're saying the battery is having a contact with the inverter.

it's just the battery handles and terminal that is shocking but the inverter is not.

Please who can help me resolve this issue.

Only the battery and terminals of the battery that are shocking nothing else.

KudozInteriors:
The installer got a bad battery for me at first and told me that the product he wanted buying wasn’t in the market. I was very angry with him and asked him why he didn’t call me. I didn’t even use the first battery at all. I asked him to return it the next day. He said we should buy Sako buy that it’s not the same price. I was already getting fed up with the whole stories. Out of trust, I involved my friend that is a PRO in the market and sent the balance for the Sako battery to him and asked him to help my installer before those guys will give him another nonsense battery because I was beginning to doubt the competence of my installer but I felt that involving this guy as a PRO/task force officer in Alaba, the distributor would respect himself and give my installer the correct thing. We have returned battery to Alaba more than 3 times since I decided to go on this journey. It’s been so much stress.

I have not called the PRO yet as I don’t know how best to handle this matter but I’ll definitely have to go to Alaba myself with the installer. He has been begging me that he didn’t know anything about what they planned because he’s aware that I wanted to arrest him. My wife had been begging me not to arrest him yet that he might not be a party to the dirty plan really.

These Alaba guys are terrible. Currently having a bad time with one battery gotten from a supposed direct OEMs store at Alaba. To get quality product from there is almost always like Russian roulette.

KudozInteriors:
I intend adding extra 3 or 4 550watts panels after this whole brouhaha has ended.

I heard that they don’t allow police or army to arrest anyone in Alaba. I don’t know how true that is. Nevertheless, I’ll get him arrested if he doesn’t cooperate.

Abeg be like I go need that your soldier contact soon.

CodeTemplarr:
there are lower capacity panels people label with higher values to rip others off. Something of circa 300-350w is re-labelled as 600w. Wicked world.

Reason I kinda stopped/slowed down selling of used panels with original label. People will say ahn ahn, your price is too cost then go and buy relabelled at cheaper price.

Humans can be hard to please jare.

KudozInteriors:
Thank you so much

I’ve thought about this too

That's a terrible advice. If I didn't know any better, I'd say that person is your installer that defrauded you.
Arrest the clown(s) and have them refund you.
Save the next person from rhis madness

fuckboys:
Letting it go for 60k. Used like new.

60a powmr CC


Satellite Town , amuwo odofin

Still available?

AndroBlaze:
@KudozInteriors

I said I wasn't going to advise you on what to do but letting these people get away with this scot free is the worst outcome.....and despite the lessons you learn I believe you will still regret it.

Take Jurors's advice seriously, book a session with Dam5reey, let him open the batteries and reveal this to the whole world on his Youtube and Tiktok channels. He'll probably hit a million views on only this case.

Callout Sako, callout Alaba, callout the fake PRO....no one will touch you once it gets on social media. Sako China will want to intervene to save their name, Alaba yeye market will want to intervene to reduce their useless name going around....no one will touch you.

Also you can report to FIJ journalism, they will take up the case and publish it on their website.

We can only get a better country if we all do our part.....this kind of rubbish cannot happen in China, and to think when I was born we used the Chinese name to laugh....now look at their society and look at ours.

Please, think about making this go viral, you will be proud to tell your family later on that you tried your best to fight injustice, just think about it.

Excellent advice 💯

fuckboys:
it's just the battery handles and terminal that is shocking but the inverter is not.

Please who can help me resolve this issue.

Only the battery and terminals of the battery that are shocking nothing else.

This type of "shocking" problem is almost always caused by some form of leakage of the 220V AC mains voltage.

Many devices and appliances have a small leakage current that only becomes noticeable if there is no proper earth (ground) connection.

Test for AC Leakage: Use a multimeter to measure AC voltage between the battery metal parts and earth ground. Any significant AC voltage indicates a faulty charger or wiring issue that must be fixed or replaced

Trippledots:
Still available?

sold

bassdow:
make una dey careful Ooo. Make dem no go open branch wey even Fouani themselves knows nothing about.

Its just before world oil at Oke'ilewo

mctfopt:
This type of "shocking" problem is almost always caused by some form of leakage of the 220V AC mains voltage.

Many devices and appliances have a small leakage current that only becomes noticeable if there is no proper earth (ground) connection.

Test for AC Leakage: Use a multimeter to measure AC voltage between the battery metal parts and earth ground. Any significant AC voltage indicates a faulty charger or wiring issue that must be fixed or replaced

omo you're right, they just took light and the shocking have stopped.

It's leaking from the mains. How do I trace this?

toscotech:
please can you give me there address in abeokuta

No1 Lalubu Str, Oke - Ilewo Road, off Post Office Road, Ibara, Abeokuta

oluwapoju:
Its just before world oil at Oke'ilewo

Thanks

Oem18:
Why?? If you cannot satisfy his quest for knowledge step aside. You yourself did not become knowledgeable overnight.

The research he has made so far on this thread has been quite captivating and will help future newbies.

It’s better he is even doing it here. Imagine he is going back to a physical store to ask or he is tormenting one technician that needs work.

ManAdii:
I don't this will be the cause. Even if there's partial contact the voltage of the battery is merely 12v DC. It can't cause a shock.

I quite understood you, would have asked for clarification but was too lazy to ask ?

What you call shock is probably static shock. If it happens mostly when you charging from NEPA, then there's leakage somewhere.
if it's connected to Solar panel, then it's still static shock though this time, from a higher voltage source.

You see eh, unless one analysis and ask questions, it's difficult to just arrive at conclusion

CodeTemplarr:
there are lower capacity panels people label with higher values to rip others off. Something of circa 300-350w is re-labelled as 600w. Wicked world.

...but I have said this here before na. If you observed, I mostly only recommend 300-watts and below.

Reason being that Should they want to inflate values, it's usually 300-watts Solar panels they use hence that 500watts or 600watts solar panel just might be 300-watts.

But then again, I equally try not to overTalk certain things because I know say dem dey here, and I no want to dey feed them info. These are tricks I developed over time.


But then again sef, One could do testing if e want BUT that na stress if buying in large quantity

Trippledots:
These Alaba guys are terrible. Currently having a bad time with one battery gotten from a supposed direct OEMs store at Alaba. To get quality product from there is almost always like Russian roulette.

When you get scammed, and you let them get away with it, then you give them power to continue. Me no dey cheat person; if you cheat me, pray say I no get your time else even your enemy go pity you

fuckboys:
it's just the battery handles and terminal that is shocking but the inverter is not.

Please who can help me resolve this issue.

Only the battery and terminals of the battery that are shocking nothing else.

me sef don response since not knowing full details.

Anyways, best way to resolve this is take it to an electrician; any electrician who knows their work should be able to help you. Technical things no too dey easy to explain to people wey no dey technical hence I no go want to waste time telling you, make you no go spoil something or wound yourself.

Presence of inverter rules out my earlier guess of a static shock, this your own na real shock like say na NEPA light shock you.

something definitely is touching the casing inside. Not being grounded is not enough proof.

Chai.. This man done go chop am again.. 😂 🤣 😂

dollarnaira:
Need this
Phone no

Was banned few minutes quoting your moniker.

bassdow:
Was kinda interested myself so I at least have it as secondary backUp but I tend to ignore adverts with basic details such as mobile number, location, and sometimes even price left out.

Me wey be say if you talk say na whatsApp calls only, I fit still ignore you because na stress to me. It's much cheaper for me to make that GSM call, than save your contact, or edit the strings and paste, then contact you - which still might take time before you respond. Me want to call and get a response ASAP

If I need such, like in this case, I request for it and make the urgent direct call. Deal sealed!

fuckboys:
i confirmed today chief, was already blazing 80w at 35v of total panel voltage earlier this morning.

👍🏾

toscotech:
please can you give me there address in abeokuta

At Panseke, it's just by the bend after the traffic light when coming from Panseke and going towards oke ilewo.

Trippledots:
These Alaba guys are terrible. Currently having a bad time with one battery gotten from a supposed direct OEMs store at Alaba. To get quality product from there is almost always like Russian roulette.

Pls which OEM store oo so we can be extra careful?

Dam5reey1:
BIY installation completed

We are still delivering as at the same time.

Hello, what is your review on this firman / itel inverters on inductive loads and surge startup of AC compressor.

Do you have any recommendations on a 4kw/5kw hybrid inverter on 24volts?

bassdow:
I quite understood you, would have asked for clarification but was too lazy to ask ?

What you call shock is probably static shock. If it happens mostly when you charging from NEPA, then there's leakage somewhere.
if it's connected to Solar panel, then it's still static shock though this time, from a higher voltage source.

You see eh, unless one analysis and ask questions, it's difficult to just arrive at conclusion

You see how you messed yourself up with "static shock" theory.
Me lazy to ask...
Make I just leave you. I know your type. ITK

All Sizes OF SMS lithium batteries available
7.2KWH ---#1,100,000
10KWH----#1,600,000
15kwh----#1,950,000
SMS Inverters also available
Call or WhatsApp me on 09116033581

ManAdii:
You see how you messed yourself up with "static shock" theory.
Me lazy to ask...
Make I just leave you. I know your type. ITK

person wey dey find talk, Oya talk like say you sabi wetin be static Shock. him call am theory

bassdow:
person wey dey find talk, Oya talk like say you sabi wetin be static Shock. him call am theory

No wahala Sabinus, na you know. Me I no know. Case closed.

Thanks to people that make me know that fouanistore is now in abeokuta because have go there today and have get is for #605,000

realy appreciate everyone

remain to save money for battery and panel

fuckboys:
omo you're right, they just took light and the shocking have stopped.

It's leaking from the mains. How do I trace this?

Guyyyy i said i would chat you today about this, and you are already experiencing what i planned to talk to you about. Your central stabilizer is the cause. PERIOD.... Stabilizers are crazy for leakages. I know from experience. Only 2 solutions: 1. Earth your stabilizer, not to your main DB, since it is feeding the DB or 2. Tap your inverter AC input upstream to the stabilizer i.e before the stabilizer, where the stabilizer is getting its own input from.

Hope you understand?