₦airaland Forum

officialfestus:
Is it feasible to use 550w panels instead of 300w for a 24v system?

so far your controller is mppt,any of the solar panels are good to go

officialfestus:
soldering is a tedious task and often times very rough, unlike welding.

Probably you need to know the act of soldering.

officialfestus:
Is it feasible to use 550w panels instead of 300w for a 24v system?

The controller min/max input voltage will ans d question.

obinna37:
so far your controller is mppt,any of the solar panels are good to go

thank you.

dollarnaira:
Probably you need to know the act of soldering.

it still wouldn't give the feeling and look of welding.

dollarnaira:
The controller min/max input voltage will ans d question.

OK, thank you.

officialfestus:
it still wouldn't give the feeling and look of welding.

Definitely it will not but cost, materials,and availability is guaranteed though will little technique and stress.

Note that a good battery goes beyond aesthetic.

Someone here spot welded over 600 cells at 7s but still cannot power 1hp sumo. Sth is wrong somewhere.

officialfestus:
I thought that the function of the bms if we use chargers or inverters meant for lead acids batteries.

The function of the BMS is to cut off at set points, but to achieve that one has to be conservative, unfortunately the parameters we use is to squeeze out every ounce of power from the battery, so at the end of the day we charge it like a lead acid battery.

dollarnaira:
Definitely it will not but cost, materials,and availability is guaranteed though will little technique and stress.

Note that a good battery goes beyond aesthetic.

Someone here spot welded over 600 cells at 7s but still cannot power 1hp sumo. Sth is wrong somewhere.

I think the cells he used are extracted from dead laptops battery or probably fake Chinese cells.

officialfestus:
I think the cells he used are extracted from dead laptops battery or probably fake Chinese cells.

Probably
Are your builds for sale?

officialfestus:
Is it feasible to use 550w panels instead of 300w for a 24v system?

This your question shall get as e be oh, only one 550w panel is not even enough

Good day guys....

Between 24v 2.5kwh and a 12v 4kwh setup, which is better?

In charging (from grid) and length of usage (assuming they both power thesame load).

Also in terms of number of panels needed, which needs more?

iraybuju:
This your question shall get as e be oh, only one 550w panel is not even enough

panels, not panel.

dollarnaira:
Probably
Are your builds for sale?

At first I was building it for fun, but now I'm selling them.

Fremlin:
Good day guys....

Between 24v 2.5kwh and a 12v 4kwh setup, which is better?

In charging (from grid) and length of usage (assuming they both power thesame load).

Also in terms of number of panels needed, which needs more?

the 24v will charge faster,while the 12v will power the load longer than the 24v.

24v 2.4kw

officialfestus:
the 24v will charge faster,while the 12v will power the load longer than the 24v.

Thanks chief

officialfestus:
Is it feasible to use 550w panels instead of 300w for a 24v system?

Yes

officialfestus:
24v 2.4kw

Super neat and beautiful.

dollarnaira:
Super neat and beautiful.

thank you sir.

officialfestus:
24v 2.4kw

Very nice build

This will be faster for commercial build

good morning, please i need this spot welder very urgently, ordering it from AliExpress will take a long time before arrival and i need it before tuesday

Obnoxious2001:
Very nice build

This will be faster for commercial build

thank you.

edobor108:
good morning, please i need this spot welder very urgently, ordering it from AliExpress will take a long time before arrival and i need it before tuesday

I have one for sale.
It hasn't been use, because I bought it alongside the 8000w spot welder I'm using currently.

officialfestus:
24v 2.4kw

Please what is the ampere capacity of each cell? If I am correct, what I am seeing here is 7S 30P configuration. I am of the opinion that JBD BMS would have been much better that the heltec BMC and active balancer you used. The price might not have much difference.

I have 3.2v 314ah LiFepo4 for sale. 100k
08117398294

Cells, case, bms, all available for sale
Hit me up on 0704 310 8767 if you're interested with a reasonable offer
Location: Lagos

0704 310 8767

olujosh301:
Cells, case, bms, all available for sale
Hit me up on 0704 310 8767 if you're interested with a reasonable offer
Location: Lagos

0704 310 8767

Do you have active balancers?

9ijaprince:
Please what is the ampere capacity of each cell? If I am correct, what I am seeing here is 7S 30P configuration. I am of the opinion that JBD BMS would have been much better that the heltec BMC and active balancer you used. The price might not have much difference.

3.2 and 3.1

dollarnaira:
Do you have active balancers?

No

Good morning my chiefs in the house, please can i connect two 450w or 500w panels in series to a 30a MPPT charge controller (its for a 24v system). the controller has a max pv input of 100v (so i know it can handle the voltage of the two panel in series), am just concerned about the total wattage if the controller can handle 900 or 1000 watts of power

justiniyke29:
Good morning my chiefs in the house, please can i connect two 450w or 500w panels in series to a 30a MPPT charge controller (its for a 24v system). the controller has a max pv input of 100v (so i know it can handle the voltage of the two panel in series), am just concerned about the total wattage if the controller can handle 900 or 1000 watts of power

It will work just fine, insofar as the VOC is within range you have no problems; for the wattage the CC will cut off at the max watt for the system, since it's 30a at 24v, it should be between 720w - 800w. I have a similiar setup with 2pcs 400w Jinko panels in series attached to a victron CC 100 30 and it works flawlessly.