₦airaland Forum

fuckboys:
the sun dey sweet me

and e dey pepper people wey never position demSelves to enjoy am. Such is life. As person dey cry, the other dey laugh

fuckboys:
the sun dey sweet me

Na the harmattan type dey here.
Too bright and hot.

dollarnaira:
Na the harmattan type dey here.
Too bright and hot.

my battery full before 11am

bassdow:
and e dey pepper people wey never position demSelves to enjoy am. Such is life. As person dey cry, the other dey laugh

true

fuckboys:
true

both nepa and sun decided to be nice to us with small panels.

Good afternoon good people.
Thnak you for all the help you provide.
I need help over this issue l am experiencing.
My setup us 5KVA Inverter, 5500W (10UNIT) OF PV and DIY assembled LiPo4 26KW battery.
Initially, everything was fine but after about a few months, if l switch on 1,5hp Pump, it will shut down, if l switch on Electric Hot Plate (3000W), it will shut down, despite the Inverter indicating battery was full.

I decided to add more Panels (team Big panel member), so l added 5units of 650 Panels.
Still, the problem persist, it will shut down under the slightest load over 1KW.

I am at a point where l need to get things right and l am wondering over a few options.
1) Is my problem that of inadequate Power from Inverter (appliances demanding more than its max power output) or is it bad configuration?
2) Can /Should l buy another 5KVA Hybrid Inverter and put the later acquired 650W Panels on it separately and use it to charge my battery, would it provide additional power and prevent these shutdowns?
3) Should l buy an external CC and connect to the 650W x 5units of Panels, to charge the battery.

Thank you

How much is the AC

fuckboys:
1hp whisen inverter ac, whisen is lg premium brand of ac. This ac is direct Tokunbo from alaba.

Not even up to 500w of consumption,

This is the total load on the inverter at the time.

Please guys, I want to know if this setup of:
1. Katrina Hybrid 3.5kva 12v Pure sine wave inverter.
2. Deriy LFP 280AH 12.8 (3.6kwh battery) with JK BMS of 200amps
3. PV array or 2.5kwh

Can power a 1hp sumo pump of 120ft during the day for at least 1hr, considering high startup surge.
Will this 3.5kva 12v Katrina inverter be able to chest the surge?
Also the battery when fully charged withstand the high few seconds current draw?

Please gurus in the house should help me out.

Brightk - mind sharing the model pls

fuckboys:
do you know the model of this inverter or a picture of it?

LG Microwave model MS2535GIS

adimx:
Please guys, I want to know if this setup of:
1. Katrina Hybrid 3.5kva 12v Pure sine wave inverter.
2. Deriy LFP 280AH 12.8 (3.6kwh battery) with JK BMS of 200amps
3. PV array or 2.5kwh

Can power a 1hp sumo pump of 120ft during the day for at least 1hr, considering high startup surge.
Will this 3.5kva 12v Katrina inverter be able to chest the surge?
Also the battery when fully charged withstand the high few seconds current draw?

Please gurus in the house should help me out.

that your battery no go last at all even if e survive the load.

Also you would be using the inverter close to it's rating.

Why exactly you interested in running 3.5kva at 12v.

If you never buy am, abort. Mind you, that your 3.5kva no get same strength as the 3.5ka or even 3kva wey I know. Just dey see am as 2kva and even at that, na sofri-sofri

5.1kwh and 10.2kwh Deye lithium ion battery available now

bassdow:
that your battery no go last at all even if e survive the load.

Also you would be using the inverter close to it's rating.

Why exactly you interested in running 3.5kva at 12v.

If you never buy am, abort. Mind you, that your 3.5kva no get same strength as the 3.5ka or even 3kva wey I know. Just dey see am as 2kva and even at that, na sofri-sofri

Just to be able to power 1hp pump for 1hr once a week.
Total normal running house load is around 350watts.

RickyM:
That won’t be cost efficient as it’s not just one person, like 3 of them in a different room.

Is it just 200w power you want to distribute?

That 20k too much for 200w load

oluchibabe:
Good afternoon good people.
Thnak you for all the help you provide.
I need help over this issue l am experiencing.
My setup us 5KVA Inverter, 5500W (10UNIT) OF PV and DIY assembled LiPo4 26KW battery.
Initially, everything was fine but after about a few months, if l switch on 1,5hp Pump, it will shut down, if l switch on Electric Hot Plate (3000W), it will shut down, despite the Inverter indicating battery was full.

I decided to add more Panels (team Big panel member), so l added 5units of 650 Panels.
Still, the problem persist, it will shut down under the slightest load over 1KW.

I am at a point where l need to get things right and l am wondering over a few options.
1) Is my problem that of inadequate Power from Inverter (appliances demanding more than its max power output) or is it bad configuration?
2) Can /Should l buy another 5KVA Hybrid Inverter and put the later acquired 650W Panels on it separately and use it to charge my battery, would it provide additional power and prevent these shutdowns?
3) Should l buy an external CC and connect to the 650W x 5units of Panels, to charge the battery.

Thank you

Is there any error before shutdown

26kwh is a lot of energy storage for it to just shutdown

sofdoc1:
Good morning guys.
Any recommendations on good 10kwh batteries at 1.7 Mil and 6kva inverters at 500k?
Thanks

With that your battery budget,talk to MrReed I think his 51.2v 16kw is 1.6m.Mrreed has a 51.2v 8.8kw he advertised for 1.1m.

And for inverter,many choices are available-Growatt,Haisic,etc

adimx:
Please guys, I want to know if this setup of:
1. Katrina Hybrid 3.5kva 12v Pure sine wave inverter.
2. Deriy LFP 280AH 12.8 (3.6kwh battery) with JK BMS of 200amps
3. PV array or 2.5kwh

Can power a 1hp sumo pump of 120ft during the day for at least 1hr, considering high startup surge.
Will this 3.5kva 12v Katrina inverter be able to chest the surge?
Also the battery when fully charged withstand the high few seconds current draw?

Please gurus in the house should help me out.

Abort this mission asap.

oluchibabe:
Good afternoon good people.
Thnak you for all the help you provide.
I need help over this issue l am experiencing.
My setup us 5KVA Inverter, 5500W (10UNIT) OF PV and DIY assembled LiPo4 26KW battery.
Initially, everything was fine but after about a few months, if l switch on 1,5hp Pump, it will shut down, if l switch on Electric Hot Plate (3000W), it will shut down, despite the Inverter indicating battery was full.

I decided to add more Panels (team Big panel member), so l added 5units of 650 Panels.
Still, the problem persist, it will shut down under the slightest load over 1KW.

I am at a point where l need to get things right and l am wondering over a few options.
1) Is my problem that of inadequate Power from Inverter (appliances demanding more than its max power output) or is it bad configuration?
2) Can /Should l buy another 5KVA Hybrid Inverter and put the later acquired 650W Panels on it separately and use it to charge my battery, would it provide additional power and prevent these shutdowns?
3) Should l buy an external CC and connect to the 650W x 5units of Panels, to charge the battery.

Thank you

If I’m in your shoe, I will find out how much KWh my panels generates on an any given day and time; cos these past days, the sun’s intensity is at a low. You clearly missed to reveal that information.

If you feel your System is shutting off at such loads of 3000watts or 1.5hp, are there additional loads on the system? Do they all sum up above your inverter rating? Look at your PV generation and compare it with the total loads you intend to power.

If PV generation is lower, you are wasting your precious time. If PV generation is around the 5Kw region, then ensure that your total load is not exceeding your inverter rating.

Some modern inverter comes with soft Start feature for heavy appliances that draws 3x 4x their power rating

Tdoctor:
Abeg who knows where I can get a soft-starter for a submersible pump. The initial power draws for pumps is almost 3X the power rating. Please, I'm not looking foe the expensive Schneider et al. soft starters with all the machinery. Just anything that will dampen that initial power draw.

Lol this is how most pop led light are, na so my own for house they light

Litewriter:
Good evening,
Has anyone experienced or experiencing situations when energy saving led bulb will be partially lit when switch is off?
This happens when my load is connect d to inverter output, but doesn't when connected directly to grid....

Note that, connection was properly done L - L, N -N

idsolar:
Brightk - mind sharing the model pls



LG Microwave model MS2535GIS

tank u

Tdoctor:
Abeg who knows where I can get a soft-starter for a submersible pump. The initial power draws for pumps is almost 3X the power rating. Please, I'm not looking foe the expensive Schneider et al. soft starters with all the machinery. Just anything that will dampen that initial power draw.

Here you go:

https://a.aliexpress.com/_EzCxs76

idsolar:
Brightk - mind sharing the model pls



LG Microwave model MS2535GIS

ah this is 1150w on microwave

oloet:
How much is the AC

300k with installation cost included in the purchase

adimx:
Please guys, I want to know if this setup of:
1. Katrina Hybrid 3.5kva 12v Pure sine wave inverter.
2. Deriy LFP 280AH 12.8 (3.6kwh battery) with JK BMS of 200amps
3. PV array or 2.5kwh

Can power a 1hp sumo pump of 120ft during the day for at least 1hr, considering high startup surge.
Will this 3.5kva 12v Katrina inverter be able to chest the surge?
Also the battery when fully charged withstand the high few seconds current draw?

Please gurus in the house should help me out.

1hp sumo on 12v?

fuckboys:
1hp sumo on 12v?

I know its 12v, did you consider the specifications listed before showing your teeth?

abcabc234:
hi everyone, i need your opinion on a certain project.. Cost is a factor here. Between deye hv batteries and using our lv batteries to achieve same function.which is more healthier in terms of cost, efficiency and safety. we are looking @ expanding the batteries to at least a 160kwh as time goes on.. its for a small guest house.

make una help me na

Gshems:
both nepa and sun decided to be nice to us with small panels.

i swear, i had a full battery before 11am

adimx:
I know its 12v, did you consider the specifications listed before showing your teeth?

how many amps bms is that battery?
most batteries comes with 200a bms, thats about 2400w on 12v. you think that can handle the startup surge on your sumo?

48v should be your sweet spot, but you can still manage with 24v. battery capacity doesn't really matter here, it only matter when you wanna run things for longer.

premium 0V-15V 60A/100A adjustable voltage battery charger now available

premium 8v-100v fully programmable smart Voltmeter now available

fuckboys:
ah this is 1150w on microwave

1150 na theory. Practical check the model I send well. Max 1000w. Then you can set it in front from 200 - 1000 to microwave. It is settable. I practically run it and confirm on the inverter. Even on the 1000 set, when the oven hot it reduced to 902w on inverter. The thing make sense.

fuckboys:
how many amps bms is that battery?
most batteries comes with 200a bms, thats about 2400w on 12v. you think that can handle the startup surge on your sumo?

48v should be your sweet spot, but you can still manage with 24v. battery capacity doesn't really matter here, it only matter when you wanna run things for longer.

Alright. Thanks for the clarification.