₦airaland Forum

My 2008 Camry 2.4L keeps throwing P0303 and P0172 codes. I've already swapped out the plugs, coils, and fuel nozzle, and an electrician checked the wiring, finding no issues. The engine idles rough and jerks at low speeds. When I unplug the coil wire for cylinder #3 while idling, there's barely any change in the RPM. My mechanic thinks it's an engine problem with cylinder #3.

Check engine flashes all the time and engine performance is so poor with crazy consumption of fuel, any help on what to do pls 🙏

A 4plugs engine is scrap. Your engine is weak,rings stuck and thus causing poor performance. It needs serious attention. Im sure the plugs are black or oily

Edunwa302:
My 2008 Camry 2.4L keeps throwing P0303 and P0172 codes. I've already swapped out the plugs, coils, and fuel nozzle, and an electrician checked the wiring, finding no issues. The engine idles rough and jerks at low speeds. When I unplug the coil wire for cylinder #3 while idling, there's barely any change in the RPM. My mechanic thinks it's an engine problem with cylinder #3.

Check engine flashes all the time and engine performance is so poor with crazy consumption of fuel, any help on what to do pls 🙏

2cribz:
A 4plugs engine is scrap. Your engine is weak,rings stuck and thus causing poor performance. It needs serious attention. Im sure the plugs are black or oily

The engine doesn't burn oil at all, the plug is in good condition when removed, no sign of not firing at at all.

Who told u it oesnt bur oil. Its a factory defect from factory. If u like no isten to me. Carry the car give chat gpt meko ot all those ozuor here.dem go scatter your car for u. Its compressin is weak. Piston rings are stuck

Edunwa302:
The engine doesn't burn oil at all, the plug is in good condition when removed, no sign of not firing at at all.