₦airaland Forum

bassdow:
YOU are RIGHT BUT writing in all CAPs tends to signify shouting to say the least.

Either way, probably He should make it an option

3.2v 50AH balaced = 100 naira

3.2v 50AH unBalaced = 90 naira

Let everyOne choose their own poison

Thar is even a little understandable, than Outright trying to discourage him.

It can still be same amount because this is the extra mile you go to increase your customer base.

Do you think if valto decides to sale top balanced cells at the same rate here, that anybody here will be able to compete with him again in cells and bms sales.

omotoda:
No vex Chairman, the truth at times is not always pleasant.I am not Valto,but at times we need to put ourselves in other's'situation.This is what he does for a living,not a hobby.You can as well acquire the skills and resources on YouTube We will wait for Valto to respond.

You Don't speak for him.

If you go to market and see a woman selling pepper and grinds it for free, and another selling without grinding who will you buy from.

Answer me

Valto:
plans in motion, will soon be available , fully compressed and top balanced with buyers preferred bms

GOD BLESS YOU VALTO
I LIKE PROMOTING PEOPLE'S BUSINESSES WITH ANY LITTLE IDEAS THAT I HAVE.

I ASSURE YOU YOU'LL SEE A SURGE IN YOUR BATTERY SALES.

JUST ADVERTISE IT HERE

ajabani4allah:
I think you always mention that all the cells are top balanced before selling them out?

i top balance the ones i couple by myself ,but i don't top balance raw cells sold to people however most of them are quite balanced and read similar voltage.

capnies:
GOD BLESS YOU VALTO
I LIKE PROMOTING PEOPLE'S BUSINESSES WITH ANY LITTLE IDEAS THAT I HAVE.

I ASSURE YOU YOU'LL SEE A SURGE IN YOUR BATTERY SALES.

JUST ADVERTISE IT HERE

we have acquired compression sealing machine, DIY packs will look like this

capnies:
Thar is even a little understandable, than Outright trying to discourage him.

It can still be same amount because this is the extra mile you go to increase your customer base.

Do you think if valto decides to sale top balanced cells at the same rate here, that anybody here will be able to compete with him again in cells and bms sales.

Again you right BUT you giving me little room to do enough choChoCho BUT no wahala. Today Time is really really tight for me.

capnies:
GOD BLESS YOU VALTO
I LIKE PROMOTING PEOPLE'S BUSINESSES WITH ANY LITTLE IDEAS THAT I HAVE.

I ASSURE YOU YOU'LL SEE A SURGE IN YOUR BATTERY SALES.

JUST ADVERTISE IT HERE

To be honest, most times, except with extreme requirements, it's kinda waste of time BUYing from the likes of @Valto or @mrReed just to do DIY. I rather tell him my prefered specs, negotiate with him and pay for a finished product. Should be much CHEAPer that way. If I can trust any of them to sell good cells to me, Shouldn't be an issue giving them custom order. that's my view anyway

bassdow:
what's model of this inverter. Reason I asked is that error 8 mostly mans the Voltage from DC source is very high.
8pcs of 620w solar panels, hopefully were all not connected in series BUT we need know the model of this haisic inverter or you share picture of the sticker on the inverter's body especially the MAX PV input.

Most times, people only do simple maths on solar panels not considering other variables.

Also rushing to change a blown fuse or breaker, without trying to figure out the primary cause is wrong.

We need first be sure issue isn't from solar panels, before considering other variables. Also help confirm if you completely off NEPA / Gen.

I am also sure that inverter isn't grounded.

Please how can I ground an inverter?
I need explanation please. Thanks in advance.

adimx:
Please how can I ground an inverter?
I need explanation please. Thanks in advance.

Kindly tell the person who setUp your system and He or She knows what to do. That's if your isn't already.

I don't have d guys nos . But I can always trace d place

sofdoc1:
Share location or number with us o.
The 6mm I saw at arena na 2k5 last and I checked in about three places. Majority of the wires being sold are used btw.

bassdow:
Kindly tell the person who setUp your system and He or She knows what to do. That's if your isn't already.

I want to learn from here. If you know kindly give some explanation on how to go about that.
I'll really appreciate that.

Good evening everyone.

I’m planning to set up a solar system for my home. I’ve done an energy audit, and based on my load, my working budget is ₦2M.

This is the quote I received from an installer:
Sako 24V 4.2kVA inverter – ₦350,000
7.2kWh CDO battery – ₦850,000
6 units of 615W solar panels – ₦810,000
Protection box – ₦85,000
Total: ₦2,095,000


I’m familiar with Sako inverters, but I’m not sure how good CDO batteries are and whether this price is reasonable.

Can anyone tell me if this is a fair deal or if I can get a better price? I’d really appreciate honest feedback before I make a decision.

MrScamp:
Good evening everyone.

I’m planning to set up a solar system for my home. I’ve done an energy audit, and based on my load, my working budget is ₦2M.

This is the quote I received from an installer:
Sako 24V 4.2kVA inverter – ₦350,000
7.2kWh CDO battery – ₦850,000
6 units of 615W solar panels – ₦810,000
Protection box – ₦85,000
Total: ₦2,095,000


I’m familiar with Sako inverters, but I’m not sure how good CDO batteries are and whether this price is reasonable.

Can anyone tell me if this is a fair deal or if I can get a better price? I’d really appreciate honest feedback before I make a decision.

Its a fair deal but it will cost you more than that. Wiring? Mc4 connecters, Rack?

Also for inverter and battery always go with manufacturers that provide support. Sako provides support but what about CDO?

bassdow:
Again you right BUT you giving me little room to do enough choChoCho BUT no wahala. Today Time is really really tight for me.

I love you bassdow
One blood

Valto:
we have acquired compression sealing machine, DIY packs will look like this

Great,
Kudos brother, help your fellow citizens, let solar enter every nooks and crannies of this Nigeria.

Should we start ordering.
Topped balanced to 3.65v and compressed

SolomonGrundy:
Thanks for the response. I just checked now and this is what I saw. Seems it's already on that SNU. Pic attached

What type of battery are you using?

Does the inverter recognize mains input?

What is the battery charging profile settings?

Received my 8kwh battery from Mr. Valto. Looking forward to enjoying using it

Valto:
we have acquired compression sealing machine, DIY packs will look like this

Good day brother, so if we order now, what should we expect

This inverter is getting cheaper.

mctfopt:
What type of battery are you using?

Does the inverter recognize mains input?

What is the battery charging profile settings?

It's a 24v lithium phosphate battery.

Yes, it recognises mains, but immediately it starts charging with mains, it automatically disconnects. And the cycle repeat itself until I put off the mains breaker.

I have no idea. How do I access the charging profile settings?

Please is there anyone with experience with this prag 15kva stabilizer? The voltage in my area flunctuates and I'm thinking of buying it to protect my appliances.

SolomonGrundy:
It's a 24v lithium phosphate battery.

Yes, it recognises mains, but immediately it starts charging with mains, it automatically disconnects. And the cycle repeat itself until I put off the mains breaker.

I have no idea. How do I access the charging profile settings?

What’s the bulk charging and float charging voltage set at?


I had this same problem with my Luxsun 4.2kva 24v inverter. I reset it the inverter, increased the bulk and float voltages, put the inverter breakers and battery off for some minutes, I put them back on and it started charging normally with grid

Precept:
Please is there anyone with experience with this prag 15kva stabilizer? The voltage in my area flunctuates and I'm thinking of buying it to protect my appliances.

How low is your voltage and what's the total ratings of the appliances?.The truth is all these stabilisers operate at 50% capacity rating once your voltage is 160v and below.

So technically if you are within that voltage range the stabilizer is working as a 7.5kva stab ,not factoring in efficiency yet.

SolomonGrundy:
It's a 24v lithium phosphate battery.

Yes, it recognises mains, but immediately it starts charging with mains, it automatically disconnects. And the cycle repeat itself until I put off the mains breaker.

I have no idea. How do I access the charging profile settings?

Ok.

Setting 05 Battery Type

Set to USE (User-Defined) to manually enter voltages.

Other options: AGM, Flooded, or LI (Lithium).

Select Li for lithium

mctfopt:
Ok.

Setting 05 Battery Type

Set to USE (User-Defined) to manually enter voltages.

Other options: AGM, Flooded, or LI (Lithium).

Select Li for lithium

It's on USE type. But i don't have the parameters. Also, i checked the settings and I saw that maximum utility charging current was set at 20A. Is that okay?

Ezimuoh:
What’s the bulk charging and float charging voltage set at?


I had this same problem with my Luxsun 4.2kva 24v inverter. I reset it the inverter, increased the bulk and float voltages, put the inverter breakers and battery off for some minutes, I put them back on and it started charging normally with grid

Bulk charging voltage is set at 28.2 while floating is 27.0. Are the values okay?

SolomonGrundy:
It's on USE type. But i don't have the parameters. Also, i checked the settings and I saw that maximum utility charging current was set at 20A. Is that okay?

would suggest you call Him, and ask if He's OKAY with video Call and if He agrees, do Video call with him so it's faster. You seem not conversant with the inverter's MENU and obviously not consulting it's manual

SolomonGrundy:
It's on USE type. But i don't have the parameters. Also, i checked the settings and I saw that maximum utility charging current was set at 20A. Is that okay?

Set to Li

Charging utility current at 20A is ok

adibo:
Received my 8kwh battery from Mr. Valto. Looking forward to enjoying using it

I got my 8.5kwh from valto too and have been serving me wela.

genius43:
This inverter is getting cheaper.

Pls which website is this?

What's the price for the 8JW and the 12KW pls