₦airaland Forum

AyarmBoye:
congratulations boss…since you have hybrid now sell me your charge controller now

Powmr pwm 80a and sms mppt 60a, which of them do u need

Unfaized:
I reduced this stuff even down to about 500w. Will charge for a day max, next day can't handle it anymore. Even from the sound of the gen u can tell.

Which stuff did you reduce? What inverter do you use?

NSEstudent:
Which stuff did you reduce? What inverter do you use?

The charging current. I use Haisic 24v 4.2kva inverter.

Do you use gen in charging ur system?

prince4pro2:
Finally here . I don join the hybrid and lithium gang. Installation still on going

Hopefully you wouldn't have needs for UPGRADIng anytime soon. Goodluck

OgogoroFreak:
Can a 3kw generator be used with 6kw deye inverter to charge my battery?

You sef see gap na. Seems you wanna feed your generator engineer. Even the best original Generator with complete capacity go still sick.

Except your DeYe inverter was over rated which is very rare as they are original.

No need telling you not to as you already knew the answer hence reason you asked. Hope say no be the ogoGoRo dey Freak you sha

Unfaized:
The charging current. I use Haisic 24v 4.2kva inverter.

Do you use gen in charging ur system?

I see. Reducing grid charging current may do the work. Problem is if the inverter handles it correctly.

I don't charge with gen. I do charge with grid if absolutely needed, especially on very bad days and days the storage was overused.

Hello My people

Please I discovered that my Inverter (itel hybrid 3.6kva) no longer charges from the grid. When ever I turn on the breaker, I get error 3 and the inverter stops. From the manual, it states the error is Bus Voltage Low

This occurs only when I turn on the grid breaker while attempting to charge. Charging from the panel is working fine

Please can this be fixed or where can I take it to for repairs... Would appreciate feedback based on your experience.... Thanks

NSEstudent:
I see. Reducing grid charging current may do the work. Problem is if the inverter handles it correctly.

I don't charge with gen. I do charge with grid if absolutely needed, especially on very bad days and days the storage was overused.

Oh well it's different. I was talking about my experience charging with gen. With grid it's not an issue.

It bloodied my gen and after a while it couldn't handle it anymore. A 3.5 kva gen, now it can't handle 0.75hp submersible.

Topper33:
Hello My people

Please I discovered that my Inverter (itel hybrid 3.6kva) no longer charges from the grid. When ever I turn on the breaker, I get error 3 and the inverter stops. From the manual, it states the error is Bus Voltage Low

This occurs only when I turn on the grid breaker while attempting to charge. Charging from the panel is working fine

Please can this be fixed or where can I take it to for repairs... Would appreciate feedback based on your experience.... Thanks

Sorry to hear this but grid is a very very dirty electricity. I cannot plug any appliances without full protection. If your pv is large enough, why grid? Manage your load wisely and stay out of grid completely.

Some 16kwh 48v geng still use grid after installing 12 to 16 panels. I get fully amazed when I hear this.

However, try check the voltage of the grid if is high enough.

Unfaized:
Oh well it's different. I was talking about my experience charging with gen. With grid it's not an issue.

It bloodied my gen and after a while it couldn't handle it anymore. A 3.5 kva gen, now it can't handle 0.75hp submersible.

Replace the avr.
Most gen these days are aluminium

Unfaized:
From personal experience I wouldn't recommend. That stuff bloodied my gen so bad that it can't power my submersible anymore.

I never understood why, but the issue came from using it to charge for about a week.

was your generator an inverter generator?

Mine is inverter generator that produces cleaner energy than regular generator.

dollarnaira:
Replace the avr.
Most gen these days are aluminium

I see. An original Sumec Firman o. Got an idea how much AVR cost?

The problem is when I put on a relatively heavy load like the Submersible, it starts jerking and then goes off.

OgogoroFreak:
was your generator an inverter generator?

Mine is inverter generator that produces cleaner energy than regular generator.

Oh. Inverter gen should do way better. Got no idea sha coz I've never owned one.

Hello all,
Trust we're good.

Has anybody here heard of Luxpowertek 6kva/15kwh Eco Beast Solar System?

I want to get installer/user insights before I fully decide.
However, I'll attach device specifications/image so that experts can look at and advise accordingly.

Thank you in advance.

Topper33:
Hello My people

Please I discovered that my Inverter (itel hybrid 3.6kva) no longer charges from the grid. When ever I turn on the breaker, I get error 3 and the inverter stops. From the manual, it states the error is Bus Voltage Low

This occurs only when I turn on the grid breaker while attempting to charge. Charging from the panel is working fine

Please can this be fixed or where can I take it to for repairs... Would appreciate feedback based on your experience.... Thanks

itel is carlcare

Unfaized:
I see. An original Sumec Firman o. Got an idea how much AVR cost?

The problem is when I put on a relatively heavy load like the Submersible, it starts jerking and then goes off.

Change mine last 3 months around 7k.
Gen was overly abused for welding - a 2.0/2.2kva max Tigmax gen with great copper coil.

prince4pro2:
Powmr pwm 80a and sms mppt 60a, which of them do u need

sms ofcourse…drop ur line boss make i chat you on watsapp

dollarnaira:
Change mine last 3 months around 7k.
Gen was overly abused for welding - a 2.0/2.2kva max Tigmax gen with great copper coil.

Ok thanks.

Thank you

May have to go there

OgogoroFreak:
itel is carlcare

prince4pro2:
Finally here . I don join the hybrid and lithium gang. Installation still on going

Better o

Thanks alot

dollarnaira:
Sorry to hear this but grid is a very very dirty electricity. I cannot plug any appliances without full protection. If your pv is large enough, why grid? Manage your load wisely and stay out of grid completely.

Some 16kwh 48v geng still use grid after installing 12 to 16 panels. I get fully amazed when I hear this.

However, try check the voltage of the grid if is high enough.

Unfaized:
Oh well it's different. I was talking about my experience charging with gen. With grid it's not an issue.

It bloodied my gen and after a while it couldn't handle it anymore. A 3.5 kva gen, now it can't handle 0.75hp submersible.

Do you not think that if the inverter was efficiently drawing a max of 500W from your Gen, no problem or damage would have occurred to your Gen if its capacity rating is also true?

Topper33:
Hello My people

Please I discovered that my Inverter (itel hybrid 3.6kva) no longer charges from the grid. When ever I turn on the breaker, I get error 3 and the inverter stops. From the manual, it states the error is Bus Voltage Low

This occurs only when I turn on the grid breaker while attempting to charge. Charging from the panel is working fine

Please can this be fixed or where can I take it to for repairs... Would appreciate feedback based on your experience.... Thanks

Do you have voltage protection before your inverter to the grid? I don't think there's any problem with your inverter, if the minimum under voltage on your inverter is set to 180v and your grid is less than 180v, it will not work. What's the voltage showing on your Avr?

NSEstudent:
Do you not think that if the inverter was efficiently drawing a max of 500W from your Gen, no problem or damage would have occurred to your Gen if its capacity rating is also true?

Definitely, limiting the charging current to what the generator can comfortably handle will work but that will meaning more charging duration.

dollarnaira:
Surge is usually between 5 to 10 max.
Try it on it. The worst that will happen is self shut down to protect itself. What is the continuous load of the inverter?

Ok, thanks.
The continuous load is not indicated, but I believe it will be some where 800w.

prince4pro2:
Powmr pwm 80a and sms mppt 60a, which of them do u need

Still available?
I'm looking to buy the SMS.

dioss:
Ok, thanks.
The continuous load is not indicated, but I believe it will be some where 800w.

Online says 500 to 800w

24v?

prince4pro2:
4kva

Topper33:
Hello My people

Please I discovered that my Inverter (itel hybrid 3.6kva) no longer charges from the grid. When ever I turn on the breaker, I get error 3 and the inverter stops. From the manual, it states the error is Bus Voltage Low

This occurs only when I turn on the grid breaker while attempting to charge. Charging from the panel is working fine

Please can this be fixed or where can I take it to for repairs... Would appreciate feedback based on your experience.... Thanks

I don't think there is anything wrong with your inverter, what is your mains voltage? If your inverter is in ups mode, it will trip off if the voltage goes below 180v

Heemcelph:
Hello all,
Trust we're good.

Has anybody here heard of Luxpowertek 6kva/15kwh Eco Beast Solar System?

I want to get installer/user insights before I fully decide.
However, I'll attach device specifications/image so that experts can look at and advise accordingly.

Thank you in advance.

Nobody has any input/information/ feedback to my ask?

Kindly assist.