₦airaland Forum

bassdow:
yes but you didn't state location or if it's 24v system or not

12v

Lagos

Elizkid:
12v

Lagos

Yes
There's a 1.2kva 12v available less than 100k.

There's also 12v 2.5 kva pure sineWave Inverter ( not Hybrid ) for 180k

Beframia:
Good evening house,
It's been almost two weeks now that I noticed that my battery charges and stops at the 3rd bar, not getting to the 4th. My inverter type is Genus Hi-Flo 4.2kVA 24V paired with a 3kwh luxwatt lithium battery, and three 685w bifacial Runergy panels.
Has anyone had a similar experience and how was it resolved?

Please how good are these Runergy panels, someone has been trying to convince me to buy them.
Anyone?

bassdow:
Yes
There's a 1.2kva 12v available less than 100k.

There's also 12v 2.5 kva pure sineWave Inverter ( not Hybrid ) for 180k

Is the 1.2kva hybrid?


I need it

Elizkid:
Is the 1.2kva hybrid?


I need it

there is a 12v 1kva Hybrid inverter that can accept up to 2pcs of 620w solar panels and it's transformer based 15ok

bassdow:
Yes
There's a 1.2kva 12v available less than 100k.

There's also 12v 2.5 kva pure sineWave Inverter ( not Hybrid ) for 180k

You said it’s available for less than 100k

Elizkid:
You said it’s available for less than 100k

Those 2 inverters mentioned earlier are not hybrid inverters.

You specifically asked for a hybrid one and I responded with a totally different one which is 1kva 12v hybrid transformer based inverter.

bassdow:
Any brand of Solar panel work for any inverter / setUp. What matters is the Solar panel being of good quality.

Thanks

bassdow:
Those 2 inverters mentioned earlier are not hybrid inverters.

You specifically asked for a hybrid one and I responded with a totally different one which is 1kva 12v hybrid transformer based inverter.

Okay

This is the sticker at the side

bassdow:
is there no sticker on body of this inverter ?

Una sabi buy funny things. There's advantage in not being the only one writing carryOver exam.

Also don't you have an engineer who could help you. No be everything we fit do from here.
Error 9 could mean different things so we just can't be specific blindly

bassdow:
Service centers in Nigeria are mostly branded looking engineer's workShop. Except it's the more premium brands, you must pay by default and dem go still do shakara for you; unlike the Sadiq down the street.

Sadiq don suffer .
Sadiq go soon adopt their pattern.

Blaqq2:
This is the sticker at the side

Are you offGrid or you use it alongside NEPA / Generator ?

You should confirm your batteries are healthy enough and not badly low.

You equally might have to confirm your solar panels are giving expected voltage and not exceeding it's max PV VOC

Equally confirm battery settings / configurations are in order.

At end of the day, few times I experienced such error with clients inverters, na faulty system hence if not any of the above. Carry go give repairer.

Me dey install tranformerLess inverters for clients, me dey use transformer based inverter personally.

Recently, someone from this thread reachout that his 5kva inverter has blown almost everyhting in the house and that especially all the light bulbs don blow finish and 1 TV don burn join and freezer dey sing as e dey work and plenty phone chargers don burn finish.

Paid him a visit and after looking around, found out 1 of the 4pcs of tubular batteries was bad. You could imagine. Rather than the thing to go off, e begin do high Voltage.

In light of that sef, would suggest we start preaching using Voltage protectors (not stablizer) by default so that anytime these transformerLess inverters wan craze, at least dem go leave appliances alone.

Beframia:
Good evening house,
It's been almost two weeks now that I noticed that my battery charges and stops at the 3rd bar, not getting to the 4th. My inverter type is Genus Hi-Flo 4.2kVA 24V paired with a 3kwh luxwatt lithium battery, and three 685w bifacial Runergy panels.
Has anyone had a similar experience and how was it resolved?

Was it getting to the 4th bar before this? Or was it forever on this 3rd bar.

So far so good.

chadbasin:
Please how good are these Runergy panels, someone has been trying to convince me to buy them.
Anyone?

This fixed the problem. I had already configured the battery type to FeL. All I did was just to change the bulk charge voltage from 28 to 28.4v, floating charge voltage from 27 to 28v, discharge cut off from 22 to 22.4v (as specified in the battery's manual), and restarted the setup. The 4th bar was not only restored but fully charged before 12pm.
Thanks.

bassdow:
To accurately debug this ya matter, one needs be physically present BUT we could try.

Check to ensure the battery settings are properly configured. That's certainly where the issue is coming from. If the current config has voltage less than the battery's full charge, then the inverter certainly would stop charging the moment it gets there thinking it's full.

Also be sure this issue isn't a One time thing.

Ensure batteryType is Lithium or Li

or if using custom settings (mostly called USER), then set things manually

Bulk / absorptionVoltage: 28.4v

Float chargeVoltage: 26.8v to 27.0v

Low DC cut off voltage: 23.5v

It was getting to the 4th bar before now....but this has been fixed by changing some of the battery settings on the inverter.

mctfopt:
Was it getting to the 4th bar before this? Or was it forever on this 3rd bar.

Beframia:
So far so good.

Can it be compared with Longi, Jinko?

Beframia:
This fixed the problem. I had already configured the battery type to FeL. All I did was just to change the bulk charge voltage from 28 to 28.4v, floating charge voltage from 27 to 28v, discharge cut off from 22 to 22.4v (as specified in the battery's manual), and restarted the setup. The 4th bar was not only restored but fully charged before 12pm.
Thanks.

Glad to be of help

Beframia:
So far so good.

This your kinda response eh

I've never used any of those but the dealer confirmed to me that it's a good brand. I settled for it after a mere physical assessment of the panels, they looked sturdy - although not the standard test for quality but I couldn't wait for when next he would have jinko in stock.

chadbasin:
Can it be compared with Longi, Jinko?

Beframia:
I've never used any of those but the dealer confirmed to me that it's a good brand. I settled for it after a mere physical assessment of the panels, they looked sturdy - although not the standard test for quality but I couldn't wait for when next he would have jinko in stock.

That brand is a good brand. Jinko and Longi ain't the only tier 1 brands. na some of us in here paint them that way. That said, would still go with either jingKo or Longi if the 3 are available and I have to choose

codemaster2much:
I need 1 to 1.5 KVA pure sine wave 12v inverter for a project, please anyone that has can mention me
thanks

New?

chadbasin:
Please how good are these Runergy panels, someone has been trying to convince me to buy them.
Anyone?

It's good, I do buy from Bread Trenergy.
The performance has been great.

Let's see if someone here don use it before too.

Anybody has this sryne Bluetooth dongle. I need it

Used

bkuranga:
New?

Beframia:
So far so good.

Greetings

Please what's the price like. Or dealer contact will be appreciated

Thank you

codemaster2much:
Used

I no get.

135k for 685w. Bought in Kaduna.

EndiaSami:
Greetings

Please what's the price like. Or dealer contact will be appreciated

Thank you

Awesome

bkuranga:
I no get.