Starting a bottling water company in Nigeria is a very lucrative and good business to invest in considering the population and the target market. The demand of clean water has expanded the market of Bottle water in Nigeria.

The Potential market place throughout Nigeria is unlimited and the very- growing population of Nigeria has made an added advantage for anyone to start, run and manage a bottle company efficiently in Nigeria. It is very good idea to start a bottle water company in Nigeria now with some limited capital and grow the business with time because there are currently a plan by the Federal government of Nigeria through a bill in the senate to ban the selling of Sachet water popularly known as pure water in many cities in Nigeria. They will also consider banning other polythene bags because of its impact in the Nigeria Environment. This will be a business boom for anyone who start the bottle water company soon in Nigeria.

Starting and running a bottle water company is very lucrative business in Nigeria and you can start with a starting-capital of between 1.8 Million Naira and 12 Million Naira for a start. You will also cover about 30 percent of your initial investment in one year because of the high demand of bottle water in Nigeria and within 3 years and half; you have made your initial start-up capital. If you manage your company properly with good management, operation strategy and marketing strategy, you may even cover the 100% initial investment within 2 years and half of starting the business.


Learn how to http://www.enterpriseboom.com/how-to-start-recharge-card-printing-business-in-nigeria/


Mineral water which is being used in every office, party, traveling, schools and in homes at many cities in Nigeria gives it an advantage and makes it one of the most profitable business one can invest in Nigeria.



Source: http://www.enterpriseboom.com/how-to-start-a-bottle-water-production-in-nigeria/

Basic things needed to start a Bottle Water Company in Nigeria



Water which is the most and vital raw material needed for bottle water production in Nigeria is always available in every part of Nigeria considering that there are many sources one can use to get its raw material as Nigeria is blessed with many waters underneath the land and other spring waters.

1. Bottle Supplier is very crucial to consider because you need to find a reliable bottle production company that is a member of the International bottled water Association and you can sign up for a membership with them. You need them to supply the bottle plastic and cap for your bottle water company in Nigeria. You can find some bottle water supplier at Vconnect or Environmental expert and tradinz.



2. Water source is very essential because you need to have a very good water source that can be dependable for a long time. You can get a spring water, mineral water, bore hole or other sources and listing your source of water in your label gives you a good advantage and some people usually checks the sources of water before buying.



3. Machines needed for the water treatment, filtering , dispensers, sealers, and other things is very essential and you must make sure that the plant will use reverse osmosis, filtration and ozonator water treatment as this is standard set by NAFDAC ( National Agency for food and drug Administration and Control)for bottling water company in Nigeria.

Source: http://www.enterpriseboom.com/how-to-start-a-bottle-water-production-in-nigeria/

4. Storage tanks is very important too as you need to store your water before pumping it into the machine and you can buy some of these tanks at ranging price of 48,000 Naira to 97,000 Naira base on the size of the tank.

5. Government Approval is very essential before you start producing or start selling and getting your approval is by registering with NAFDAC. It costs about 85,000 Naira to register with NAFDAC but I will advise to find some agents that work with NAFDAC officials to be able to fasten your registration process and they may demand up to 350,000 Naira to speed up and obtain the Approval for your company. They are recognized by NAFDAC and will also make the site inspection and approval to be easier and often go free. The license is renewable after every 5 years for bottle Water Company.

Other things will be:

• Fire extinguishers and prevention equipments.
• Alternate Power supply.
• Online Batch Number Printer.
• Trucks for delivering finished product.
• Offices for administration purposes.
• Office Equipments

Source: http://www.enterpriseboom.com/how-to-start-a-bottle-water-production-in-nigeria/

How to start your Bottle water company in Nigeria


 Study the Environment and research your target market.
 Get Your Business Plan.
 Look for Good Location.
 Buy or lease a land (at least 1,800 Sq) is enough.
 Build a factory or a warehouse.
 Buy and Install the water bottling Plant.
 Find a Bottle Supplier.
 Get Your Cap and Labels ready.
 Register your business or Company with CAC
 Get Approval from NAFDAC
 Get Additional Power Generator
 Employ few Employers at first.
 Start Production.
 Market and Advertise Regularly.

Starting a bottle water company in Nigeria gives you also an added advantage as you can easily obtain loan from the bank or get easily the SMEs fund support from the government through the bank and some other organization. There are other big competitors in the Market who has made names for their self in bottle water company but because of Nigeria population, Everyone is still accommodated in the Business. Such company is as follows:

I. Eva Water
II. Gossy Water
III. Pure Life Water
IV. Swan water
V. Ragolis water
VI. Coscharis water and others….

Source: http://www.enterpriseboom.com/how-to-start-a-bottle-water-production-in-nigeria/

Finding Your Target Market

Finding your target Market where you can sell your finished products is easier in Nigeria as people gather many places and so they need to drink water regularly to void dehydrating and such places are as follows:

1. Sports Vicinity

This is a very good place to advertise your products and have an agreement with the organizers to approve the sale of your water only or with their few ones.

2. Shopping Malls

You might find it difficult convincing some shopping malls owner to list your product in their shelves as a beginner but with time you will have your way and this is a very good location to advertise and sell your product.

3. Super Market/Convenience Stores

This is regarded as the small shopping malls in Nigeria and has a need to advertise with them to sell your products.

4. Restaurants/Eateries/Fast Food

This is a very good place to market your product and considering the vast number of restaurants in Nigeria. You will always have your way with many restaurants and eateries out there in Nigeria.

5. Hotels//Guest House Bars

This is a very lucrative target market for your product as most hostels don’t sell sachet water in their premises and this will make a high demand of your product if allowed.

6. Drinking Joints/Beer/Wine/Meat Bars

This is also a very good marketing target because of the high populations of Nigeria that turn out to visit these places for relaxation and entertainments.


Source: http://www.enterpriseboom.com/how-to-start-a-bottle-water-production-in-nigeria/

Other places might include:

• Offices
• Schools
• Universities and Markets




Marketing Your Product

This is a very essential thing one has to do if you own a bottle company in Nigeria. You have to advertise your products regularly in TV stations, Radio Stations, let your products be featured in some TV programmers, Offer free samples of your products to people. Promote your product always. Make use of your Marketing strategy to keep your bottle water company afloat always.

You can also learn How to Start Manufacturing company in Nigeria here http://www.enterpriseboom.com/how-to-start-a-manufacturing-company-in-nigeria/




Source: http://www.enterpriseboom.com/how-to-start-a-bottle-water-production-in-nigeria/

Why not vitamin water?

Brandnew2:
Why not vitamin water?

Lols...

wilsonl:


Lols...

Trust me it would fly, too many bottled water brands.

Brandnew2:
Trust me it would fly, too many bottled water brands.

You have a point.

Front page things

From your calculations what is the total cost of setting up this water company

emmykk:
From your calculations what is the total cost of setting up this water company

An average water bottling plant costs about 200,000euros.

hahn:


An average water bottling plant costs about 200,000euros.

that is around how much in naira

hahn:


An average water bottling plant costs about 200,000euros.

I don't think you are right.... Average water plant cost about 50,000 Dollars. Check at Alibaba or India sellers.

wilsonl:


I don't think you are right.... Average water plant cost about 50,000 Dollars. Check at Alibaba or India sellers.

I quoted you already regarding this on another of your thread. The Chinese sell fake machines and they don't manufacture spare parts and that means you are on your own when the machine starts developing faults. Also their machines have a low capacity of BPH. At the end of the day, its a very unwise business decision.

Stop encouraging people to waste their money.

[b]You have nice ideas, however atimes you write like you don't live in Nigeria. If you did you would have included a "power plant" in that list. The major reason why manufacturing and business in general have a hard time growing is because we have to generate our own electricity. Do you have any idea how much diesel you will have to purchase to be able to power a generator used to power a manufacturing machine?

Also, you wrote "preferably from China/India" in that list. Obviously you know nothing about machinery. The Chinese, most especially, are in the habit of cloning European machinery. What they do is they visit large fairs in Europe, buy the machines and go back to their countries to clone their own. As a result, they end up producing the same machines with lower production capacity and most times they are never concerned with spare parts. I know you probably said that because their machines are cheap but in manufacturing, you can never substitute quality for cheap price.

I once had a client who insisted on purchasing machinery from China and after 2 years the machines began to develop faults. My client had to travel all the way to China to request for parts from the company only to be laughed at and told "we don't sell parts". Another client bought machines and barely a month after using the machines, one of them exploded and killed a staff.

I know you mean well but your post shows you have no practical knowledge of manufacturing and how manufacturing machines work. Please, make a deeper research before recommending Chinese and Indian machines to people before they start wasting their capital.

Keep up the good work[/b]

emmykk:
that is around how much in naira

40m and above depending on the exchange rate

hahn:


I quoted you already regarding this on another of your thread. The Chinese sell fake machines and they don't manufacture spare parts and that means you are on your own when the machine starts developing faults. Also their machines have a low capacity of BPH. At the end of the day, its a very unwise business decision.

Stop encouraging people to waste their money.

[b]You have nice ideas, however atimes you write like you don't live in Nigeria. If you did you would have included a "power plant" in that list. The major reason why manufacturing and business in general have a hard time growing is because we have to generate our own electricity. Do you have any idea how much diesel you will have to purchase to be able to power a generator used to power a manufacturing machine?

Also, you wrote "preferably from China/India" in that list. Obviously you know nothing about machinery. The Chinese, most especially, are in the habit of cloning European machinery. What they do is they visit large fairs in Europe, buy the machines and go back to their countries to clone their own. As a result, they end up producing the same machines with lower production capacity and most times they are never concerned with spare parts. I know you probably said that because their machines are cheap but in manufacturing, you can never substitute quality for cheap price.

I once had a client who insisted on purchasing machinery from China and after 2 years the machines began to develop faults. My client had to travel all the way to China to request for parts from the company only to be laughed at and told "we don't sell parts". Another client bought machines and barely a month after using the machines, one of them exploded and killed a staff.

I know you mean well but your post shows you have no practical knowledge of manufacturing and how manufacturing machines work. Please, make a deeper research before recommending Chinese and Indian machines to people before they start wasting their capital.

Keep up the good work[/b]

I will not join issues with you sir but you seems to forget that most european companies and American companies has for over ten years running their business in China and India because it is the new trend for people to buy machinery just like Dubai become a tourist attraction center beating Miami, London and many other big cities.

I will probably say that you are not in touch with how machinery work. Some people go to china and ask for the cheapest machinery that could do the same work a better one can do. Chinese companies sells to you what you ask for and if you want a machine that lasts you will get it. Concerning the issue of price, Well China and India are growing rapidly and most companies tend to lower their price to attract consumers just like Dangote Cement once lowered the price of cement to 1000 Naira. It does not mean that Dangote cement has a lesser quality. You seems not to understand economic in business.

I mosly advice people to buy machinery from India rather than China as I have tasted Indian Machines.

Another mistakes that people made just like you are requesting for a bigger machine with high price...Most of the high priced machine are difficult to find their parts unlike other ones that their parts are all over lagos. I know a big company that was own by a Former Politician who went and bought high price machinery and when the machine spoils, it takes about 3 months to get the right foreigners to fix it and time is money. Could you Imagine a company that produce daily used products to shut down for 3 months? You have lost 40% of your customer.This happen time and time for thins company despite the huge amount of money being pumped in it. When the owner sees that he has pumped much money than the company has has gotten. He shuts the company down and uptill this time the company is still shut down.This company has about 4 transformers, 5 3 stories building for staffs and produce about 7 products. Just to inform you how big the company is.

Just like a Driver will advice you not to buy the latest 2015 Mack truck for your startup because of lack of parts and other factors..So Will I advice you to start small and grow with time. Start with a machine that can produce a range number of products a day before jumping to the one that can produce many more so that when problems occur, you will be positioned well to tackle it or even switch to the smaller mcahine till the bigger one is fixed.

Thanks Sir.

you have a point. nice one

wilsonl:


I will not join issues with you sir but you seems to forget that most european companies and American companies has for over ten years running their business in China and India because it is the new trend for people to buy machinery just like Dubai become a tourist attraction center beating Miami, London and many other big cities.

I will probably say that you are not in touch with how machinery work. Some people go to china and ask for the cheapest machinery that could do the same work a better one can do. Chinese companies sells to you what you ask for and if you want a machine that lasts you will get it. Concerning the issue of price, Well China and India are growing rapidly and most companies tend to lower their price to attract consumers just like Dangote Cement once lowered the price of cement to 1000 Naira. It does not mean that Dangote cement has a lesser quality. You seems not to understand economic in business.

I mosly advice people to buy machinery from India rather than China as I have tasted Indian Machines.

Another mistakes that people made just like you are requesting for a bigger machine with high price...Most of the high priced machine are difficult to find their parts unlike other ones that their parts are all over lagos. I know a big company that was own by a Former Politician who went and bought high price machinery and when the machine spoils, it takes about 3 months to get the right foreigners to fix it and time is money. Could you Imagine a company that produce daily used products to shut down for 3 months? You have lost 40% of your customer.This happen time and time for thins company despite the huge amount of money being pumped in it. When the owner sees that he has pumped much money than the company has has gotten. He shuts the company down and uptill this time the company is still shut down.This company has about 4 transformers, 5 3 stories building for staffs and produce about 7 products. Just to inform you how big the company is.

Just like a Driver will advice you not to buy the latest 2015 Mack truck for your startup because of lack of parts and other factors..So Will I advice you to start small and grow with time. Start with a machine that can produce a range number of products a day before jumping to the one that can produce many more so that when problems occur, you will be positioned well to tackle it or even switch to the smaller mcahine till the bigger one is fixed.

Thanks Sir.

Pure water machine for sale...pls call
+2348068045941

vivian001:
Pure water machine for sale...pls call
+2348068045941

Nice

hahn:
you have a point. nice one

Thanks Sir!

This business plan is practical indeed !

»» You also start making big money by recycling waste water bottles and sachets into nylon bags. See the full information here http://www.businessparrot.com/2015/02/how-to-recycle-waste-water-sachets-into.html?m=1

»» Also, you can consider setiting up an ideal water retail outfit in your neighbourhood and make a lot of money from the business. Read the full business plan here http://www.businessparrot.com/2015/02/set-up-borehole-water-retail-business.html?m=1

»» Have you thought about starting a retail Depot for sachet water and bottled water before ? See all you need to know here http://www.businessparrot.com/2015/02/make-money-from-retail-business-of.html?m=1

Cheers from http://www.BusinessParrot.com !!!

GentleFrank:
This business plan is practical indeed !

»» You also start making big money by recycling waste water bottles and sachets into nylon bags. See the full information here http://www.businessparrot.com/2015/02/how-to-recycle-waste-water-sachets-into.html?m=1

»» Also, you can consider setiting up an ideal water retail outfit in your neighbourhood and make a lot of money from the business. Read the full business plan here http://www.businessparrot.com/2015/02/set-up-borehole-water-retail-business.html?m=1

»» Have you thought about starting a retail Depot for sachet water and bottled water before ? See all you need to know here http://www.businessparrot.com/2015/02/make-money-from-retail-business-of.html?m=1

Cheers from http://www.BusinessParrot.com !!!

OK

this is nice

Nice one @ poster...

But no investor might wish to go into a business that takes more than 2 years before your start making profits,that's even if you are able to break even into the market cos there are already firmed competitors in the market. Regarding the profit margin.

If the profit margin is attractive then its a good deal waiting but im unsure when its bottle water biz.only maybe invested inline with other beverage,food item as a boost.

Thanks

millhouse:
this is nice

Thanks.

It is easier to start in Nigeria.

Do you need a sample bottled water business plan template? This is an in-depth guide on how to start a bottled water company.

wilsonl:
Other places might include:

• Offices
• Schools
• Universities and Markets




Marketing Your Product

This is a very essential thing one has to do if you own a bottle company in Nigeria. You have to advertise your products regularly in TV stations, Radio Stations, let your products be featured in some TV programmers, Offer free samples of your products to people. Promote your product always. Make use of your Marketing strategy to keep your bottle water company afloat always.

You can also learn How to Start Manufacturing company in Nigeria here http://www.enterpriseboom.com/how-to-start-a-manufacturing-company-in-nigeria/




Source: http://www.enterpriseboom.com/how-to-start-a-bottle-water-production-in-nigeria/

Please can you explain the marketing strategies on how to sell bottle water to offices in Nigeria? Most offices have few employees and some don't even have canteens.

get our Sachet Pure Water Business Plan In Nigeria
https://businessplanhub.com.ng/sachet-pure-water-business-plan-in-nigeria-pdf/