₦airaland Forum

I'm sure there has to be a point here better than me listing out a bunch of CNCs...

Pakingzzz:
Thats quite interesting.. What type of CNC have you programmed?

litaninja:
I'm sure there has to be a point here better than me listing out a bunch of CNCs...

Ok, just need someone good in C and C++

I'll ask a friend and get back to you

Pakingzzz:
Ok, just need someone good in C and C++

Pakingzzz:
My name is kingsley Obinna, aka pakingzzz. I am a native of Abia state, Nigeria.
In this thread, i am going to publish the technical details of my work-in progress, as i build a 3D house printer.
This machine is going to be capable of building a family sized bungalow, from german floor level to roofing level without the direct involvement of human labour ...
The project isn't claiming to be capable of building an entire house without human labour involvement.
Here's how the machine works.
The foundation would be dug by human labour and the necessary blocks placed in place, the floor casted. The machine would then start operation from the casted floor level, laying each block one at a time whilst squirting concret at the right places. It does this operation all round, untill a 1st coache has been established. It then move up a bit, and repeat the sequence. It does this untill it gets to the roofing height level, it then stops.
Once upto roofing level, human labour would then take up from there, doing the necessary fittings, plumbings, wirings and roofings etc.
The benefits of this machine sticks out like a boil..
This machine can invoke things like: Reduction in the cost of building a house by 30-40%.
Reduse the time it takes to build a house.
Reduction in direct human labour involvement.

We seriously need a 3D printer in Aba for a whole lot of things. Ariaria boys will benefit from it alot. Been thinking about it before i stumbled upon your post. It is a good idea,i have seen it perform wonders on various videos i watched on youtube. Wish ytou luck!

Please any update on your progress. You can reach me on yelfal@yahoo.com

yelfal:
Please any update on your progress. You can reach me on yelfal@yahoo.com

Still searching...

Still on it...

pakingzzzzz:
Still on it...

bro sup with this project?... Update pls...

INDUSTRIALFAN:
bro sup with this project?... Update pls...

Still looking for a sponsor.

I respect you for your big mind. nothing is impossible these days.
these project will cost more than estimated in all areas.
And there are many things to put in mind.
I love ur ingenuity.

pakingzzzzz:
Still looking for a sponsor.

okay boss.... How much do you think could finance this?

INDUSTRIALFAN:
okay boss.... How much do you think could finance this?

Roughly 3 to 4 million Naira.