₦airaland Forum

Hello

Please I seek help on this forum for a competent Mech. I have a 2005 mazda6 that is giving me start issues.

History of problem

Imported the vehicle from d US as run n drive.

Cleared the vehicle via adexfem and vehicle was driven to destination

Did servicing and normal checks...drove vehicle around for about 3months

One morning vehicle refuses to come alive. Cranks but doesn't come alive

Fuel pump has been checked and it supplies.

Will be grateful if sum1 can recommend me a mech that can come to my place @ ojota, Lagos

Thanks

Carshopper:
Hello

Please I seek help on this forum for a competent Mech. I have a 2005 mazda6 that is giving me start issues.

History of problem

Imported the vehicle from d US as run n drive.

Cleared the vehicle via adexfem and vehicle was driven to destination

Did servicing and normal checks...drove vehicle around for about 3months

One morning vehicle refuses to come alive. Cranks but doesn't come alive

Fuel pump has been checked and it supplies.

Will be grateful if sum1 can recommend me a mech that can come to my place @ ojota, Lagos

Thanks

Honmusa, mayor2013, dechotec.

Carshopper:
Hello

Please I seek help on this forum for a competent Mech. I have a 2005 mazda6 that is giving me start issues.

History of problem

Imported the vehicle from d US as run n drive.

Cleared the vehicle via adexfem and vehicle was driven to destination

Did servicing and normal checks...drove vehicle around for about 3months

One morning vehicle refuses to come alive. Cranks but doesn't come alive

Fuel pump has been checked and it supplies.

Will be grateful if sum1 can recommend me a mech that can come to my place @ ojota, Lagos

Thanks

Call 08165520837 or 08156087872. Bbpin is 7BE1C552

GAZZUZZ:
Honmusa, mayor2013, dechotec.

Thanks OgaBoss

mayor2013:
Call 08165520837 or 08156087872. Bbpin is 7BE1C552

OK...Boss

What was the scan result?

Sometimes its the CPS/CKP sensors but the scan will let you know.

You had mechanics digging into it before proper diagnosis.

Crank no start is either you car overheated so you have to reset with scanner.

Or one of the 2 sensors above one controls spark plug the other controls fuel.Fuel pump works or spark plug work doesnot mean the car will work if any of those sensors is bad.

sultaan:
What was the scan result?

Sometimes its the CPS/CKS sensors but the scan will let you know.

You had mechanics digging into it before proper diagnosis.

Crank no start is either you car overheated so you have to reset with scanner.

Or one of the 2 sensors above one controls spark plug the other controls fuel.Fuel pump works or spark plug work doesnot mean the car will work if any of those sensors is bad.

No check lite (to my knowledge) and no codes after numerous scan. Actually got a scan tool when imported my very 1st mazda6.

Will check the sensors u noted.

Thanks alot