How To Wake Your Fried Decoder Without Pc - Satellite TV Technology

How To Wake Your Fried Decoder Without Pc - Satellite TV Technology - Nairaland

Nairaland Forum › Entertainment › TV/Movies › Satellite TV Technology › How To Wake Your Fried Decoder Without Pc (7548 Views)

1 Reply (Go Down)

How To Wake Your Fried Decoder Without Pc by Trendy247(op): 5:21pm On May 09, 2016*

Some days ago, I begged the gurus on this forum to help me with a fake srt4669XII software, but no one cared to help. Well, I decided to take d bull by d horn and now I've gotten all I needed plus how to wake a dead strong decoder without a PC.

1. Unzip and Put the downloaded software into an empty flash drive.
2.Plug the decoder to power source.
3. Switch ON the decoder from the back switch and at the same time, press and hold the front Power button for at least 5sec.
4. You'll see the .... Moving (meaning that its loading)
5. Once the installation is completed, ur decoder will power ON.

Re: How To Wake Your Fried Decoder Without Pc by almonrea(m): 6:05pm On May 09, 2016

Trendy247:
Some days ago, I begged the gurus on this forum to help me with a fake srt4669XII software, but no one cared to help. Well, I decided to take d bull by d horn and now I've gotten all I needed plus how to wake a dead strong decoder without a PC.
If u're interested, indicated n I'll drop it

I dey down,update me

Re: How To Wake Your Fried Decoder Without Pc by Trendy247(op): 6:20pm On May 09, 2016

almonrea:
I dey down,update me

Updated

Re: How To Wake Your Fried Decoder Without Pc by agitator: 11:15am On May 11, 2016

Trendy247:
Some days ago, I begged the gurus on this forum to help me with a fake srt4669XII software, but no one cared to help. Well, I decided to take d bull by d horn and now I've gotten all I needed plus how to wake a dead strong decoder without a PC.

1. Unzip and Put the downloaded software into an empty flash drive.
2.Plug the decoder to power source.
3. Switch ON the decoder from the back switch and at the same time, press and hold the front Power button for at least 5sec.
4. You'll see the .... Moving (meaning that its loading)
5. Once the installation is completed, ur decoder will power ON.

Please stop disturbing people and read angry

it has been posted on this forum since 2013 undecided

https://www.nairaland.com/712408/free-air-satellite-tv-general/294#14649630

gadotor:
DOES WITH DEAD STRONG DECODERS THIS YOU CAN REVIVED IT. 1.PAY A NEW PEN DRIVE 2.DOWNLOAD NEW SOFTWARE FOR YOUR DECODER ONTO IT 3.PRUG THE PENDRIVE ONTO THE DEAD DECODER 4.PRUG THE DECODER TO POWER WITHOUT PUTTING IT ON.5 .SWITCH POWER ON AT THE SAME TIME PRESS THE STANDY POWER BUTTON IN FRONT PANEL UNTIL IT START LOADING BEFORE LEAVING THE STANDY POWER BUTTON,IT WILL UPDATE AND BRING THE DECODER BACK TO LIVE, .......note...You should emty pendrive without and other files or software,enjoy ypirself,thank you

allow people to rest in this hard economic times; cry

Re: How To Wake Your Fried Decoder Without Pc by Trendy247(op): 2:42pm On May 11, 2016

agitator:
Please stop disturbing people and read

it has been posted on this forum since 2013

https://www.nairaland.com/712408/free-air-satellite-tv-general/294#14649630

allow people to rest in this hard economic times;

And so u expect people to start reading all the 1250 pages in that thread just to get that Info?

Re: How To Wake Your Fried Decoder Without Pc by babsofe: 10:41am On Dec 18, 2016

please i tried ur method on a dead
srt-4657a, but it didnt respond

Re: How To Wake Your Fried Decoder Without Pc by bobojoshua(m): 12:16pm On Dec 27, 2016

Trendy247:
Some days ago, I begged the gurus on this forum to help me with a fake srt4669XII software, but no one cared to help. Well, I decided to take d bull by d horn and now I've gotten all I needed plus how to wake a dead strong decoder without a PC.

1. Unzip and Put the downloaded software into an empty flash drive.
2.Plug the decoder to power source.
3. Switch ON the decoder from the back switch and at the same time, press and hold the front Power button for at least 5sec.
4. You'll see the .... Moving (meaning that its loading)
5. Once the installation is completed, ur decoder will power ON.

1 Reply

Please Help My Fake SRT4669X Wake Up • 2 • 3 • 4

My Gotv Is Taking Much Time To Load Than B4 • French Speakers Installers • Solution To Champion Tv, Top Tv And Max Scramble Channel