₦airaland Forum

My decoder was not powering on... So I went to fix it....d guy changed somethings on d power panel and it On.... But now, its On but showing no signal. I have connected d antenna cable, no show.
Can fixing d power section affect receiver,?
And can thunder affect d dish outside? because the thunder was too much.

ify84:
My decoder was not powering on... So I went to fix it....d guy changed somethings on d power panel and it On.... But now, its On but showing no signal. I have connected d antenna cable, no show.
Can fixing d power section affect receiver,?
And can thunder affect d dish outside? because the thunder was too much.

the fix shouldnt affect the signal ic.. apparently the lnb on the dish is toast!!! or the dish has shifted a bit.

twinskenny:
the fix shouldnt affect the signal ic.. apparently the lnb on the dish is toast!!! or the dish has shifted a bit.

" the lnb on the dish is toast!!" meaning?.

ok, good to know that the fix won't affect d signal.... so, no need to go back to the repairer.... na to look for expert or can I use the remote to search channels

Most likely a faulty decoder and lnb.If I was asked to diagnose, I ll first check for voltage from the decoder to lnb port, if it's present then its most likely a faulty lnb.

ify84:
" the lnb on the dish is toast!!" meaning?.

ok, good to know that the fix won't affect d signal.... so, no need to go back to the repairer.... na to look for expert or can I use the remote to search channels

look for an installer to check the signal for you