₦airaland Forum

CondomSir:
You may go ahead and carry it out then.

for L=80cm, my t=14.25s, as L decreases, the time taken to complete 10 oscillations also decreases

ibroh22:
x=10,20,30,40,50,60
V=1.60,1.80,2.10,2.30,2.60,2.90
I=0.27,0.31,0.35,0.39,0.44,0.48

NatureBoy91:
I may agree on that if some points are in vertical intercept.

hassantaofeeq90:
Q1 is on simple harmonic motion.looking at the listed apparatus.we will be asked to vary d values of h in order to get d values for T^2.u only need d values of h and T^2.other values will be gotten using calculator if need be

ibroh22:
x=10,20,30,40,50,60
V=1.60,1.80,2.10,2.30,2.60,2.90
I=0.27,0.31,0.35,0.39,0.44,0.48

hassantaofeeq90:
check my comments very well. I said d main values u need is h and T^2.b4 u can get T^2 u would av gotten T.so wat are u now saying?then log T and log H are obtained using calculator

ComradeTY:
The values to one dp give V=1.6,1.8,2.1,2.3,2.6,2.9 0.3,0.3,0.4,0.4,0.4,0.5
This is what u can have on ur voltmeter and ammeter respectively

hassantaofeeq90:
this is practically impossible@comradety

NatureBoy91:
Q1 is the hardest, I would advise one go for Q2 & 3. Q2 is the simplest. Q1 & 3 are logical.

hassantaofeeq90:
Q1 is on simple harmonic motion.looking at the listed apparatus.we will be asked to vary d values of h in order to get d values for T^2.u only need d values of h and T^2.other values will be gotten using calculator if need be

hassantaofeeq90:
check d picx I uploaded. these are not my values

xenoo:
Q1 is the simplest o. Just displace slightly and take ur readings. But I just plotted graph to Hassan's values for Q3. Very correct.

ibroh22:
did u have the readings,,,so we can work towards that?

NatureBoy91:
The values r incorrect, all tend towards the horizontal instead of the vertical.

NatureBoy91:
The values r incorrect, all tend towards the horizontal instead of the vertical.

xenoo:
Nope. Waec said the graph was hard to plot becus of the negative and positive values involved.

ibroh22:
this serious,,wat could be wrong,,,your connection or what

ibroh22:
this serious,,wat could be wrong,,,your connection or what

Brymo:
Remember 2 follow instructions, yellow paper said bulb(touch light). I connected my circuit d bulb came to life. Nobody is talking about heat, which is d simplest. It's on impurity.

CondomSir:
Please give me a direct link to this page. i'm using a small phone and can't view that pix

NatureBoy91:
That's 4rm hassan's values.

Brymo:
Remember 2 follow instructions, yellow paper said bulb(touch light). I connected my circuit d bulb came to life. Nobody is talking about heat, which is d simplest. It's on impurity.