| Massive Recruitment In An Oil And Gas Company by rebella(f): 2:38pm On Mar 25, 2019 |
Hello all,
I am currently massively recruiting for several vacancies within the Oil and Gas Industry, Qualified candidates should send their CV's and all credentials( CV and Credentials together, very important, else candidates will be disqualified)
PLANNER:
• Minimum of 5 years’ experience in maintenance planning for offshore oil and gas installations.
• Higher National Diploma or higher qualification.
• CMMS/SAP experience and know-how
TECHNICIAN (VIBRATION ANALYST) :
• Minimum of OND (Mechanical or Electrical);
• Minimum of 3 years’ experience in the maintenance field on offshore oil and gas installations
• Minimum 2yrs experience in the use of Single / double channel Spectrum Vibration Analyzers.
• Ability to demonstrate basic understanding of operating principles machinery applicable to Oil & Gas operations (e.g. Pumps, Compressors, Turbines, Gearbox, CAT Engine etc.).
• Basic understanding of machinery fault e.g. Unbalance, Misalignment, wears etc.
• Demonstrate basic understanding of rotating machinery phenomenon e.g. Resonance, Vibration, Frequency and Period simple vibration waveform. Surge in compressors etc.
• Ability to write good technical report.
TECHNICIAN (VIBRATION ANALYST)
Minimum of HND or BSc (Mechanical or Electrical)
• Minimum 5yrs experience in the use of Single / Double channel Spectrum Vibration Analyzers; Machinery fault diagnoses using Vibration Spectrum, Time waveform and Orbit analysis;
• Good understanding of Machinery principles and application in the Oil & Gas operations
• Understanding of basic rotor-dynamics
• Good understanding of rotating machinery phenomenon e.g. Resonance, Surge etc. Ability to write good technical report. Attained level-ii training or certification on Vibration Analysis
INFRARED TECHNICIAN
Minimum of OND (Mechanical or Electrical);
• Minimum 2yrs experience in the use of Thermographic Infrared Camera and Vibration Analyzers.
• Ability to demonstrate basic understanding of operating principles machinery applicable to Oil & Gas operations (e.g. Pumps, Compressors, Turbines, Gearbox, CAT Engine etc.).
• Basic understanding of machinery fault e.g. Unbalance, Misalignment, wears etc.
• Demonstrate basic understanding of rotating machinery phenomenon e.g. Resonance, Vibration, Frequency and Period simple vibration waveform
INFRARED ANALYST
Minimum of HND or BSc (Mechanical or Electrical);
• 5yrs experience in the use of Thermographic Infrared Camera and Vibration Analyzers;
• Able to interpret machinery Thermographic Images for Machinery fault diagnoses;
• Ability to perform Vibration Spectrum, Time waveform and Orbit analysis;
• Good understanding of Machinery principles and Application in the Oil & Gas operations;
• Understanding of basic rotor-dynamics;
• Good understanding of rotating machinery phenomenon e.g. Resonance, Surge etc. Ability to write good technical report. Attained level-11 training or certification on Vibration Analysis and a 3day training on Infrared Thermograph
LABORATORY TECHNICIAN
• Higher National Diploma or Higher Qualification in Lab Technology/Science
• Minimum of 3 years’ cognate experience.
CHEMIST
• BSc or Higher Qualification in Chemistry/Geology/Science
• Laboratory Experience will be added advantage
• Minimum of 5 years’ cognate experience.
MECHANICAL SUPERVISOR
Minimum: 8 years’ experience in the mechanical maintenance
• BSc. /Higher National Diploma or Higher Qualification in Mechanical/Production Engineering
• SAP experience and know-how
• Basic knowledge of the process of oil and gas treatment and thorough knowledge of equipment used in oil and gas installations
• Knowledge of aero derivative gas generators and compressors, Fire water pumps, HP barrel pumps, submersible pumps, process and utility valves and Diesel Generators
• Participate in all audit activities (SHES, HAZOPS, RCFA....)
• Ability to read and interpret P&IDs
• Participate and propose solution in interfaces resolution between contractors for all mechanical related matters
• Previous Supervisory/lead experience shall be an advantage
ELECTRICAL SUPERVISOR
Minimum of 8 years work experience in Electrical Maintenance
• BSc. /Higher National Diploma or Certificate (HND) or higher qualification.
• SAP experience and know-how
• Basic knowledge of the process of oil and gas treatment and thorough knowledge of equipment used in oil and gas installations
• Must have knowledge of HV & LV power distribution and controls network, HV & LV motor drives and alternators, Inverters, HV cells, variable speed units, light networks, switch gears and Generators
INSTRUMENTATION SUPERVISOR
Minimum of 8 years’ experience in the maintenance field on offshore oil and gas installations.
• BSc. Higher National Diploma (HND) or Higher qualification in Electrical/ Instrumentation & Control Engineering
• SAP experience and know-how
• Must have handled flow meters in all forms up to automation level
• Must have ability to install and calibrate ultrasonic flow meters
• Participate in all audit activities (SHES, HAZOPS, RCFA....)
• Ability to read and interpret P&IDs.
SURVIVAL SYSTEM ENGINEER
• minimum (10) years’ experience in maintenance on all types of enclosed motor propelled survival crafts, and winches to SOLAS & IMO and /or other applicable standards relevant to the specific equipment
• B.Sc. Mechanical/Instrumentation/Electrical engineering or equivalent
HVAC SUPERVISOR
• Minimum of 8 years relevant HVAC experience in the maintenance field on offshore oil and gas installations
• Higher National Diploma or Certificate (HND or equivalent.) Mech. / Elect Engineering
SAP experience and know-how
HVAC SENIOR TECHNICIAN
Minimum of 5 years’ relevant HVAC experience in the maintenance field on offshore oil and gas installations.
• Higher National Diploma or Certificate (Mech. / Elect Engineering.)
SAP experience and know-how
HVAC TECHNICIAN
• Minimum of 3 years’ relevant HVAC experience in the maintenance field on offshore oil and gas installations
• Ordinary National Diploma in Engineering/Science
• Documented training in maintenance field
SUPPORT ENGINEER
Minimum: 5 years’ Work Experience in oil and gas industry where at least 3 years’ experience with offshore work requirements.
• B.Sc. Mechanical/Instrumentation/Electrical engineering or equivalent.
• SAP experience and know-how
• Experience in Computer maintenance management system, CMMS.
MATERIAL SUPPORT TECHNICIAN
• Minimum 3 years’ experience in the maintenance field on offshore oil and gas installations.
• Material handling, warehousing and logistics
• Higher National Diploma or Higher qualification.
• SAP experience and know-how
RESCUER
• Minimum of 5 years oil field work experience with Trade test I,II,& III or Equivalent
• Must have IRATA Level 3 certification.
FITTER
• Minimum of 3 years Work experience with Trade test I,II,& III or Equivalent
STRUCTURAL WELDER- CARBON STEEL & LOW ALLOY STEEL
• Capable of welding Carbon Steel & Low Alloy Steel
• Capable of welding with SMAW Process
Must be certified as Coded Structural welder with AWSD 1.1
PIPE WELDER- CARBON STEEL & LOW ALLOY STEEL
Capable of welding Carbon Steel & Low Alloy Steel
• Capable of welding with SMAW Process
• Must be certified as Coded Structural welder with API 1104 and ASME B31.3
COMBINATION WELDER
• Capable of welding Carbon Steel & Low Alloy Steel
• Capable of welding with GTAW Process
• Must be certified as Coded Structural welder with API 1104 and ASME B31.3
PLC Technician
Minimum of 6 years’ experience in the maintenance field on offshore oil and gas installations.
• Higher National Diploma or Higher qualification in Electrical/Instrumentation & Control Engineering
• Experience in PLC, Allen Bradley, Siemens, ladder logic systems etc. plus related communication interfaces and Human Machine Interfaces (HMI) - and all Machine Monitoring Systems (Bentley Nevada) including GE System 1
Documented training in Instrumentation & Controls.
METERING SENIOR TECHNICIANS
Minimum: 5 years’ experience on Fiscal metering of oil and gas and analyzers
• Higher National Diploma or Higher qualification (Electrical/Instrumentation & Control Engineering
• Experience in the planning, execution and follow up of calibration, preventive/corrective maintenance of the Metering package, all analyzers such as Oxygen analyzers, HC analyzers, Dew point analyzers, oil in water analyzers, conductivity/pH analyzers, chlorine analyzers, Turbidity analyzers, Density analyzers, BSW analyzers and all flow transmitters, including magnetic, ultrasonic, differential pressure, vortex, coriolis, Turbine flow transmitters and other Instrumentation & Controls
• SAP experience and know-how
• Must have handled flow meters in all forms up to automation level
• Must have ability to install and calibrate ultrasonic flow meters
Ability to read / interpret P&IDs
METERING TECHICIAN
Minimum: 3 years’ experience on Fiscal metering of oil and gas and analyzers.
• Higher National Diploma (Electrical/Instrumentation & Control Engineering
• Experience in the planning, execution and follow up of calibration, preventive/ corrective maintenance of the Metering package, all analyzers such as Oxygen analysers, HC analyzers, Dew point analyzers, oil in water analyzers, conductivity/pH analyzers, chlorine analyzers, Turbidity analyzers, Density analyzers, BSW analyzers and all flow transmitters, including magnetic, ultrasonic, differential pressure, vortex, coriolis, Turbine flow transmitters and other Instrumentation & Controls
• SAP experience and know-how
• Must have ability to install and calibrate ultrasonic flow meters
• Ability to read / interpret P&IDs
INSULATION FOREMAN
Minimum of 10 years Work experience with Trade test I,II,& III or Equivalent
SHEET METAL TECHNICIAN
Minimum of 3 years Work experience with Trade test I,II,& III or Equivalent
TECH INSULATION FOREMAN
Minimum of 3 years Work experience with Trade test I,II,& III or Equivalent
PSV TECHNICIAN
• OND /Equivalent or Higher Qualification in Electrical/Electronics/Systems/Instrumentation & Control Engineering
• Minimum of 3 years’ experience in the maintenance field on offshore oil and gas installation
• Documented training in oil field valve maintenance.
State the role you are applying for and send your credentials and CVs to bella.pepple@gmail.com
|
| Re: Massive Recruitment In An Oil And Gas Company by rebella(f): 4:14pm On Mar 25, 2019 |
rebella:
Hello all,
I am currently massively recruiting for several vacancies within the Oil and Gas Industry, Qualified candidates should send their CV's and all credentials( CV and Credentials together, very important, else candidates will be disqualified)
PLANNER:
• Minimum of 5 years’ experience in maintenance planning for offshore oil and gas installations.
• Higher National Diploma or higher qualification.
• CMMS/SAP experience and know-how
TECHNICIAN (VIBRATION ANALYST) :
• Minimum of OND (Mechanical or Electrical);
• Minimum of 3 years’ experience in the maintenance field on offshore oil and gas installations
• Minimum 2yrs experience in the use of Single / double channel Spectrum Vibration Analyzers.
• Ability to demonstrate basic understanding of operating principles machinery applicable to Oil & Gas operations (e.g. Pumps, Compressors, Turbines, Gearbox, CAT Engine etc.).
• Basic understanding of machinery fault e.g. Unbalance, Misalignment, wears etc.
• Demonstrate basic understanding of rotating machinery phenomenon e.g. Resonance, Vibration, Frequency and Period simple vibration waveform. Surge in compressors etc.
• Ability to write good technical report.
TECHNICIAN (VIBRATION ANALYST)
Minimum of HND or BSc (Mechanical or Electrical)
• Minimum 5yrs experience in the use of Single / Double channel Spectrum Vibration Analyzers; Machinery fault diagnoses using Vibration Spectrum, Time waveform and Orbit analysis;
• Good understanding of Machinery principles and application in the Oil & Gas operations
• Understanding of basic rotor-dynamics
• Good understanding of rotating machinery phenomenon e.g. Resonance, Surge etc. Ability to write good technical report. Attained level-ii training or certification on Vibration Analysis
INFRARED TECHNICIAN
Minimum of OND (Mechanical or Electrical);
• Minimum 2yrs experience in the use of Thermographic Infrared Camera and Vibration Analyzers.
• Ability to demonstrate basic understanding of operating principles machinery applicable to Oil & Gas operations (e.g. Pumps, Compressors, Turbines, Gearbox, CAT Engine etc.).
• Basic understanding of machinery fault e.g. Unbalance, Misalignment, wears etc.
• Demonstrate basic understanding of rotating machinery phenomenon e.g. Resonance, Vibration, Frequency and Period simple vibration waveform
INFRARED ANALYST
Minimum of HND or BSc (Mechanical or Electrical);
• 5yrs experience in the use of Thermographic Infrared Camera and Vibration Analyzers;
• Able to interpret machinery Thermographic Images for Machinery fault diagnoses;
• Ability to perform Vibration Spectrum, Time waveform and Orbit analysis;
• Good understanding of Machinery principles and Application in the Oil & Gas operations;
• Understanding of basic rotor-dynamics;
• Good understanding of rotating machinery phenomenon e.g. Resonance, Surge etc. Ability to write good technical report. Attained level-11 training or certification on Vibration Analysis and a 3day training on Infrared Thermograph
LABORATORY TECHNICIAN
• Higher National Diploma or Higher Qualification in Lab Technology/Science
• Minimum of 3 years’ cognate experience.
CHEMIST
• BSc or Higher Qualification in Chemistry/Geology/Science
• Laboratory Experience will be added advantage
• Minimum of 5 years’ cognate experience.
MECHANICAL SUPERVISOR
Minimum: 8 years’ experience in the mechanical maintenance
• BSc. /Higher National Diploma or Higher Qualification in Mechanical/Production Engineering
• SAP experience and know-how
• Basic knowledge of the process of oil and gas treatment and thorough knowledge of equipment used in oil and gas installations
• Knowledge of aero derivative gas generators and compressors, Fire water pumps, HP barrel pumps, submersible pumps, process and utility valves and Diesel Generators
• Participate in all audit activities (SHES, HAZOPS, RCFA....)
• Ability to read and interpret P&IDs
• Participate and propose solution in interfaces resolution between contractors for all mechanical related matters
• Previous Supervisory/lead experience shall be an advantage
ELECTRICAL SUPERVISOR
Minimum of 8 years work experience in Electrical Maintenance
• BSc. /Higher National Diploma or Certificate (HND) or higher qualification.
• SAP experience and know-how
• Basic knowledge of the process of oil and gas treatment and thorough knowledge of equipment used in oil and gas installations
• Must have knowledge of HV & LV power distribution and controls network, HV & LV motor drives and alternators, Inverters, HV cells, variable speed units, light networks, switch gears and Generators
INSTRUMENTATION SUPERVISOR
Minimum of 8 years’ experience in the maintenance field on offshore oil and gas installations.
• BSc. Higher National Diploma (HND) or Higher qualification in Electrical/ Instrumentation & Control Engineering
• SAP experience and know-how
• Must have handled flow meters in all forms up to automation level
• Must have ability to install and calibrate ultrasonic flow meters
• Participate in all audit activities (SHES, HAZOPS, RCFA....)
• Ability to read and interpret P&IDs.
SURVIVAL SYSTEM ENGINEER
• minimum (10) years’ experience in maintenance on all types of enclosed motor propelled survival crafts, and winches to SOLAS & IMO and /or other applicable standards relevant to the specific equipment
• B.Sc. Mechanical/Instrumentation/Electrical engineering or equivalent
HVAC SUPERVISOR
• Minimum of 8 years relevant HVAC experience in the maintenance field on offshore oil and gas installations
• Higher National Diploma or Certificate (HND or equivalent.) Mech. / Elect Engineering
SAP experience and know-how
HVAC SENIOR TECHNICIAN
Minimum of 5 years’ relevant HVAC experience in the maintenance field on offshore oil and gas installations.
• Higher National Diploma or Certificate (Mech. / Elect Engineering.)
SAP experience and know-how
HVAC TECHNICIAN
• Minimum of 3 years’ relevant HVAC experience in the maintenance field on offshore oil and gas installations
• Ordinary National Diploma in Engineering/Science
• Documented training in maintenance field
SUPPORT ENGINEER
Minimum: 5 years’ Work Experience in oil and gas industry where at least 3 years’ experience with offshore work requirements.
• B.Sc. Mechanical/Instrumentation/Electrical engineering or equivalent.
• SAP experience and know-how
• Experience in Computer maintenance management system, CMMS.
MATERIAL SUPPORT TECHNICIAN
• Minimum 3 years’ experience in the maintenance field on offshore oil and gas installations.
• Material handling, warehousing and logistics
• Higher National Diploma or Higher qualification.
• SAP experience and know-how
RESCUER
• Minimum of 5 years oil field work experience with Trade test I,II,& III or Equivalent
• Must have IRATA Level 3 certification.
FITTER
• Minimum of 3 years Work experience with Trade test I,II,& III or Equivalent
STRUCTURAL WELDER- CARBON STEEL & LOW ALLOY STEEL
• Capable of welding Carbon Steel & Low Alloy Steel
• Capable of welding with SMAW Process
Must be certified as Coded Structural welder with AWSD 1.1
PIPE WELDER- CARBON STEEL & LOW ALLOY STEEL
Capable of welding Carbon Steel & Low Alloy Steel
• Capable of welding with SMAW Process
• Must be certified as Coded Structural welder with API 1104 and ASME B31.3
COMBINATION WELDER
• Capable of welding Carbon Steel & Low Alloy Steel
• Capable of welding with GTAW Process
• Must be certified as Coded Structural welder with API 1104 and ASME B31.3
PLC Technician
Minimum of 6 years’ experience in the maintenance field on offshore oil and gas installations.
• Higher National Diploma or Higher qualification in Electrical/Instrumentation & Control Engineering
• Experience in PLC, Allen Bradley, Siemens, ladder logic systems etc. plus related communication interfaces and Human Machine Interfaces (HMI) - and all Machine Monitoring Systems (Bentley Nevada) including GE System 1
Documented training in Instrumentation & Controls.
METERING SENIOR TECHNICIANS
Minimum: 5 years’ experience on Fiscal metering of oil and gas and analyzers
• Higher National Diploma or Higher qualification (Electrical/Instrumentation & Control Engineering
• Experience in the planning, execution and follow up of calibration, preventive/corrective maintenance of the Metering package, all analyzers such as Oxygen analyzers, HC analyzers, Dew point analyzers, oil in water analyzers, conductivity/pH analyzers, chlorine analyzers, Turbidity analyzers, Density analyzers, BSW analyzers and all flow transmitters, including magnetic, ultrasonic, differential pressure, vortex, coriolis, Turbine flow transmitters and other Instrumentation & Controls
• SAP experience and know-how
• Must have handled flow meters in all forms up to automation level
• Must have ability to install and calibrate ultrasonic flow meters
Ability to read / interpret P&IDs
METERING TECHICIAN
Minimum: 3 years’ experience on Fiscal metering of oil and gas and analyzers.
• Higher National Diploma (Electrical/Instrumentation & Control Engineering
• Experience in the planning, execution and follow up of calibration, preventive/ corrective maintenance of the Metering package, all analyzers such as Oxygen analysers, HC analyzers, Dew point analyzers, oil in water analyzers, conductivity/pH analyzers, chlorine analyzers, Turbidity analyzers, Density analyzers, BSW analyzers and all flow transmitters, including magnetic, ultrasonic, differential pressure, vortex, coriolis, Turbine flow transmitters and other Instrumentation & Controls
• SAP experience and know-how
• Must have ability to install and calibrate ultrasonic flow meters
• Ability to read / interpret P&IDs
INSULATION FOREMAN
Minimum of 10 years Work experience with Trade test I,II,& III or Equivalent
SHEET METAL TECHNICIAN
Minimum of 3 years Work experience with Trade test I,II,& III or Equivalent
TECH INSULATION FOREMAN
Minimum of 3 years Work experience with Trade test I,II,& III or Equivalent
PSV TECHNICIAN
• OND /Equivalent or Higher Qualification in Electrical/Electronics/Systems/Instrumentation & Control Engineering
• Minimum of 3 years’ experience in the maintenance field on offshore oil and gas installation
• Documented training in oil field valve maintenance.
State the role you are applying for and send your credentials and CVs to bella.pepple@gmail.com
Lalasticlala front page please, mynd44 |
| Re: Massive Recruitment In An Oil And Gas Company by rebella(f): 1:57pm On Mar 26, 2019 |
still recruiting. |
|
| Re: Massive Recruitment In An Oil And Gas Company by Folanipekun(m): 3:16am On Mar 27, 2019 |
I applied for both Laboratory Technician and Chemist |
| Re: Massive Recruitment In An Oil And Gas Company by rebella(f): 1:01pm On Mar 27, 2019 |
Folanipekun:
I applied for both Laboratory Technician and Chemist Yes, I moved you in for Chemist not Lab Tech. 1 Like |
| Re: Massive Recruitment In An Oil And Gas Company by rebella(f): 1:03pm On Mar 27, 2019 |
Still accepting Cvs, Please endeavour to include your credentials both academic,training and any professional membership. CVs alone are insufficient. I have mailed some people with impressive CVs both no credentials, please check your emails. |
| Re: Massive Recruitment In An Oil And Gas Company by Folanipekun(m): 6:47pm On Mar 27, 2019 |
rebella:
Yes, I moved you in for Chemist not Lab Tech.
God bless you. |
| Re: Massive Recruitment In An Oil And Gas Company by Starpro87(m): 1:53am On Mar 28, 2019 |
rebella:
Still accepting Cvs, Please endeavour to include your credentials both academic,training and any professional membership. CVs alone are insufficient. I have mailed some people with impressive CVs both no credentials, please check your emails. Good day, I sent in my CVs with credentials for both PSV & Metering Technician two days ago. Could I know the status of my application by any helpful means? Thanks. |
| Re: Massive Recruitment In An Oil And Gas Company by Starpro87(m): 2:00am On Mar 28, 2019 |
rebella:
Still accepting Cvs, Please endeavour to include your credentials both academic,training and any professional membership. CVs alone are insufficient. I have mailed some people with impressive CVs both no credentials, please check your emails. Good one. Thanks a lot. |
| Re: Massive Recruitment In An Oil And Gas Company by rebella(f): 1:33pm On Mar 28, 2019 |
Starpro87:
Good day,
I sent in my CVs with credentials for both PSV & Metering Technician two days ago. Could I know the status of my application by any helpful means?
Thanks. Unfortunately, I haven't moved anyone to the PSV so if you sent your application, you were unqualified. |
| Re: Massive Recruitment In An Oil And Gas Company by rebella(f): 1:36pm On Mar 28, 2019 |
Still accepting CVs |
|
| Re: Massive Recruitment In An Oil And Gas Company by nerdymufasa(m): 7:01pm On Mar 28, 2019 |
rebella:
Unfortunately, I haven't moved anyone to the PSV so if you sent your application, you were unqualified. Please confirm if I or anyone else have been moved for the material support technician position. Thanks |
| Re: Massive Recruitment In An Oil And Gas Company by rebella(f): 12:57pm On Mar 29, 2019 |
nerdymufasa:
Please confirm if I or anyone else have been moved for the material support technician position.
Thanks Yes, but I can't confirm if you are the one. |
| Re: Massive Recruitment In An Oil And Gas Company by Folanipekun(m): 4:03pm On Apr 08, 2019 |
Am still expecting your call for interview. |
| Re: Massive Recruitment In An Oil And Gas Company by Samacliveth82: 5:01pm On Apr 08, 2019 |
I sent my CV and Credentials for the post of Metering Technician. Thanks |
| Re: Massive Recruitment In An Oil And Gas Company by Nobody: 5:16pm On Apr 08, 2019 |
Please are you still accepting CVs? |
| Re: Massive Recruitment In An Oil And Gas Company by rebella(f): 9:51am On Apr 09, 2019 |
rebella:
Hello all,
I am currently massively recruiting for several vacancies within the Oil and Gas Industry, Qualified candidates should send their CV's and all credentials( CV and Credentials together, very important, else candidates will be disqualified)
PLANNER:
• Minimum of 5 years’ experience in maintenance planning for offshore oil and gas installations.
• Higher National Diploma or higher qualification.
• CMMS/SAP experience and know-how
TECHNICIAN (VIBRATION ANALYST) :
• Minimum of OND (Mechanical or Electrical);
• Minimum of 3 years’ experience in the maintenance field on offshore oil and gas installations
• Minimum 2yrs experience in the use of Single / double channel Spectrum Vibration Analyzers.
• Ability to demonstrate basic understanding of operating principles machinery applicable to Oil & Gas operations (e.g. Pumps, Compressors, Turbines, Gearbox, CAT Engine etc.).
• Basic understanding of machinery fault e.g. Unbalance, Misalignment, wears etc.
• Demonstrate basic understanding of rotating machinery phenomenon e.g. Resonance, Vibration, Frequency and Period simple vibration waveform. Surge in compressors etc.
• Ability to write good technical report.
TECHNICIAN (VIBRATION ANALYST)
Minimum of HND or BSc (Mechanical or Electrical)
• Minimum 5yrs experience in the use of Single / Double channel Spectrum Vibration Analyzers; Machinery fault diagnoses using Vibration Spectrum, Time waveform and Orbit analysis;
• Good understanding of Machinery principles and application in the Oil & Gas operations
• Understanding of basic rotor-dynamics
• Good understanding of rotating machinery phenomenon e.g. Resonance, Surge etc. Ability to write good technical report. Attained level-ii training or certification on Vibration Analysis
INFRARED TECHNICIAN
Minimum of OND (Mechanical or Electrical);
• Minimum 2yrs experience in the use of Thermographic Infrared Camera and Vibration Analyzers.
• Ability to demonstrate basic understanding of operating principles machinery applicable to Oil & Gas operations (e.g. Pumps, Compressors, Turbines, Gearbox, CAT Engine etc.).
• Basic understanding of machinery fault e.g. Unbalance, Misalignment, wears etc.
• Demonstrate basic understanding of rotating machinery phenomenon e.g. Resonance, Vibration, Frequency and Period simple vibration waveform
INFRARED ANALYST
Minimum of HND or BSc (Mechanical or Electrical);
• 5yrs experience in the use of Thermographic Infrared Camera and Vibration Analyzers;
• Able to interpret machinery Thermographic Images for Machinery fault diagnoses;
• Ability to perform Vibration Spectrum, Time waveform and Orbit analysis;
• Good understanding of Machinery principles and Application in the Oil & Gas operations;
• Understanding of basic rotor-dynamics;
• Good understanding of rotating machinery phenomenon e.g. Resonance, Surge etc. Ability to write good technical report. Attained level-11 training or certification on Vibration Analysis and a 3day training on Infrared Thermograph
LABORATORY TECHNICIAN
• Higher National Diploma or Higher Qualification in Lab Technology/Science
• Minimum of 3 years’ cognate experience.
CHEMIST
• BSc or Higher Qualification in Chemistry/Geology/Science
• Laboratory Experience will be added advantage
• Minimum of 5 years’ cognate experience.
MECHANICAL SUPERVISOR
Minimum: 8 years’ experience in the mechanical maintenance
• BSc. /Higher National Diploma or Higher Qualification in Mechanical/Production Engineering
• SAP experience and know-how
• Basic knowledge of the process of oil and gas treatment and thorough knowledge of equipment used in oil and gas installations
• Knowledge of aero derivative gas generators and compressors, Fire water pumps, HP barrel pumps, submersible pumps, process and utility valves and Diesel Generators
• Participate in all audit activities (SHES, HAZOPS, RCFA....)
• Ability to read and interpret P&IDs
• Participate and propose solution in interfaces resolution between contractors for all mechanical related matters
• Previous Supervisory/lead experience shall be an advantage
ELECTRICAL SUPERVISOR
Minimum of 8 years work experience in Electrical Maintenance
• BSc. /Higher National Diploma or Certificate (HND) or higher qualification.
• SAP experience and know-how
• Basic knowledge of the process of oil and gas treatment and thorough knowledge of equipment used in oil and gas installations
• Must have knowledge of HV & LV power distribution and controls network, HV & LV motor drives and alternators, Inverters, HV cells, variable speed units, light networks, switch gears and Generators
INSTRUMENTATION SUPERVISOR
Minimum of 8 years’ experience in the maintenance field on offshore oil and gas installations.
• BSc. Higher National Diploma (HND) or Higher qualification in Electrical/ Instrumentation & Control Engineering
• SAP experience and know-how
• Must have handled flow meters in all forms up to automation level
• Must have ability to install and calibrate ultrasonic flow meters
• Participate in all audit activities (SHES, HAZOPS, RCFA....)
• Ability to read and interpret P&IDs.
SURVIVAL SYSTEM ENGINEER
• minimum (10) years’ experience in maintenance on all types of enclosed motor propelled survival crafts, and winches to SOLAS & IMO and /or other applicable standards relevant to the specific equipment
• B.Sc. Mechanical/Instrumentation/Electrical engineering or equivalent
HVAC SUPERVISOR
• Minimum of 8 years relevant HVAC experience in the maintenance field on offshore oil and gas installations
• Higher National Diploma or Certificate (HND or equivalent.) Mech. / Elect Engineering
SAP experience and know-how
HVAC SENIOR TECHNICIAN
Minimum of 5 years’ relevant HVAC experience in the maintenance field on offshore oil and gas installations.
• Higher National Diploma or Certificate (Mech. / Elect Engineering.)
SAP experience and know-how
HVAC TECHNICIAN
• Minimum of 3 years’ relevant HVAC experience in the maintenance field on offshore oil and gas installations
• Ordinary National Diploma in Engineering/Science
• Documented training in maintenance field
SUPPORT ENGINEER
Minimum: 5 years’ Work Experience in oil and gas industry where at least 3 years’ experience with offshore work requirements.
• B.Sc. Mechanical/Instrumentation/Electrical engineering or equivalent.
• SAP experience and know-how
• Experience in Computer maintenance management system, CMMS.
MATERIAL SUPPORT TECHNICIAN
• Minimum 3 years’ experience in the maintenance field on offshore oil and gas installations.
• Material handling, warehousing and logistics
• Higher National Diploma or Higher qualification.
• SAP experience and know-how
RESCUER
• Minimum of 5 years oil field work experience with Trade test I,II,& III or Equivalent
• Must have IRATA Level 3 certification.
FITTER
• Minimum of 3 years Work experience with Trade test I,II,& III or Equivalent
STRUCTURAL WELDER- CARBON STEEL & LOW ALLOY STEEL
• Capable of welding Carbon Steel & Low Alloy Steel
• Capable of welding with SMAW Process
Must be certified as Coded Structural welder with AWSD 1.1
PIPE WELDER- CARBON STEEL & LOW ALLOY STEEL
Capable of welding Carbon Steel & Low Alloy Steel
• Capable of welding with SMAW Process
• Must be certified as Coded Structural welder with API 1104 and ASME B31.3
COMBINATION WELDER
• Capable of welding Carbon Steel & Low Alloy Steel
• Capable of welding with GTAW Process
• Must be certified as Coded Structural welder with API 1104 and ASME B31.3
PLC Technician
Minimum of 6 years’ experience in the maintenance field on offshore oil and gas installations.
• Higher National Diploma or Higher qualification in Electrical/Instrumentation & Control Engineering
• Experience in PLC, Allen Bradley, Siemens, ladder logic systems etc. plus related communication interfaces and Human Machine Interfaces (HMI) - and all Machine Monitoring Systems (Bentley Nevada) including GE System 1
Documented training in Instrumentation & Controls.
METERING SENIOR TECHNICIANS
Minimum: 5 years’ experience on Fiscal metering of oil and gas and analyzers
• Higher National Diploma or Higher qualification (Electrical/Instrumentation & Control Engineering
• Experience in the planning, execution and follow up of calibration, preventive/corrective maintenance of the Metering package, all analyzers such as Oxygen analyzers, HC analyzers, Dew point analyzers, oil in water analyzers, conductivity/pH analyzers, chlorine analyzers, Turbidity analyzers, Density analyzers, BSW analyzers and all flow transmitters, including magnetic, ultrasonic, differential pressure, vortex, coriolis, Turbine flow transmitters and other Instrumentation & Controls
• SAP experience and know-how
• Must have handled flow meters in all forms up to automation level
• Must have ability to install and calibrate ultrasonic flow meters
Ability to read / interpret P&IDs
METERING TECHICIAN
Minimum: 3 years’ experience on Fiscal metering of oil and gas and analyzers.
• Higher National Diploma (Electrical/Instrumentation & Control Engineering
• Experience in the planning, execution and follow up of calibration, preventive/ corrective maintenance of the Metering package, all analyzers such as Oxygen analysers, HC analyzers, Dew point analyzers, oil in water analyzers, conductivity/pH analyzers, chlorine analyzers, Turbidity analyzers, Density analyzers, BSW analyzers and all flow transmitters, including magnetic, ultrasonic, differential pressure, vortex, coriolis, Turbine flow transmitters and other Instrumentation & Controls
• SAP experience and know-how
• Must have ability to install and calibrate ultrasonic flow meters
• Ability to read / interpret P&IDs
INSULATION FOREMAN
Minimum of 10 years Work experience with Trade test I,II,& III or Equivalent
SHEET METAL TECHNICIAN
Minimum of 3 years Work experience with Trade test I,II,& III or Equivalent
TECH INSULATION FOREMAN
Minimum of 3 years Work experience with Trade test I,II,& III or Equivalent
PSV TECHNICIAN
• OND /Equivalent or Higher Qualification in Electrical/Electronics/Systems/Instrumentation & Control Engineering
• Minimum of 3 years’ experience in the maintenance field on offshore oil and gas installation
• Documented training in oil field valve maintenance.
State the role you are applying for and send your credentials and CVs to bella.pepple@gmail.com
Still receiving CVs and Credentials , with a focus on Welders. Please send CVs and Certificates. |
