₦airaland Forum

thebigkendo:
Did you see where I highlighted aliexpress??

kingreign:
I got them from aliexpress too

urose93:
Show us clearly how you calculated and constructed the whole thing.
What you posted is not detailed.

TRYGO:
In the opening part of the writeup, I had already stated the availability of those LEDs in the market.

I'm just the kind of guy that likes reverse engineering stuffs, if I can do them.

Spending such a time on what I have put my mind to do, no matter how formidable it is, does not bugged me down. I think the most important thing is time management, what I want achieved, and priorities.

Stuffs like these makes me better understand how some computations were arrived at, and how to practically implement what has being theoretically designed.


PS: @Automotech. You seems to pretty much understand the concept here.


Regards,
Joseph

thebigkendo:
They don't last.. Speaking from experience & what he did is cheaper

thebigkendo:
But if Gazz does something like this.. I am very sure you won't be saying this..

TRYGO:
For those wanting the designed calculations, I'd upload that later in the day.

TRYGO:
For those wanting the designed calculations, I'd upload that later in the day.

thebigkendo:
Well mine from aliexpress did not last

HeavenlyBang:
Can confirm. One of my welcome lights burnt out within three weeks.

thebigkendo:
Cc kingreign

TRYGO:
For those wanting the designed calculations, I'd upload that later in the day.

TRYGO:
Logo removed, and a sketch of the logo made on a fretboard breadboard. Testing the fitting position

TRYGO:
However, I have decided to purchased an already made LED strips, which I'd designed for the logo. This design, would have a variable resistor, that would vary the brightness of the LED logo at night, and so forth. A 7.5A fuse would be incorporated inline on the battery positive side, up to where the switch would be. I intend to operate the logo independently of other accessories.

Lexusgs430:
HeavenlyBang....... Come and pi.mp your logo.........

TRYGO:
Thbigkendo. That 7.5A fuse(normal automotive fuse) I just want it in there, just after the battery, to protect that logo, just in case there was any inrushing current. I already had the LEDs regulated to the current limit I want(20-30mA).

7.5A isn't for operating the LEDs logo. If you try that, your logo would be fried.

Thanks for the corrections on the fretboard usage too. Corrections have being effected